Pro Tips for Creating Stunning Picture-in-Picture Effects in Final Cut Pro

How to Create a Picture-in-Picture Effect Using Final Cut Pro

Benjamin Arango

Mar 27, 2024• Proven solutions

Sometimes we need to show two videos together on the same screen to convey certain usage information. If you are searching for a tool to make this task possible then Final Cut Pro is the best choice for you.

This tool can help you to use the picture-in-picture effect with ease. However, the process for adding this effect cannot be completed within one r two steps.

The article below contains complete details about how to add PIP effects using Final Cut Pro. You will be glad to know that FCP also works with few integrated plugins that assist in the free picture in picture effect generation.

How to Create PIP Effect with FCP

If you are ready with two videos and now want to bring them to the same screen then prefer to follow these simple steps:

Step 1: Add Background video

The very first step that you need to follow for PIP effect generation using FCP is to bring your main or background video to the timeline as a primary storyline. Once you have created the primary storyline then all videos for the PIP effect will be added to it.

Step 2: Add PIP videos

It is time to choose the higher video clip so that the PIP effect can be applied. This task can be done either by using on-screen type controls available on the viewer or you can move ahead with transform controls available on the inspector.

Note that lower clips use to stay in the background in final results whereas upper clips will appear in the foreground. By default, both clips use to have 100% full screen with 100% opaque settings.

Step 3: Apply PIP effect

As now you have added both videos on-screen now you have to select the higher video and then click over the rectangular transform button that is available on the lower-left corner of viewer screen. As soon as you make this selection, the icon will turn into blue color, and naturally 8 dots will appear around the selected image or video. Use any one of these dots for scaling your selection in asymmetrical order.

Step 4: Adjust PIP Effect

If you want to scale this image in a symmetrical fashion then simply drag the dot to the corner from the central position.
Now hold the option key and drag one dot to the corner. It will help you to shrink as well as to enlarge the image even without affecting its actual aspect ratio.
Users can keep on scaling this foreground image till the time they achieve essential size.
Now click inside your selected image and start dragging it to reach a certain specific position. You can place it anywhere on a big screen.

Step 5: Follow precise Adjustment

Simply select the top clip and then hit Command + 4 to open the inspector. Now click on that blue show button over your FCP screen and it will provide you complete information about the transform category of available built-in effects. If you use inspector for this task then it can help you to get very precise results for scaling needs. It assists users to manage images with accurate position and size.

Step 6: Apply Cross- Dissolve

Now choose the leading edge of effect and use Command + T. It will immediately apply the default cross-dissolve option for starting clip.
You will be glad to know that the PIP effect does not restrict users to work just upon a single image rather it can be used to process as many pictures as your project needs and that can fit inside the frame.

Check this video tutorial to know more details:

Picture in Picture Plug-ins for Final Cut Pro

There are so many plug-ins available in the market for Final Cut Pro platform and all of them possess unique qualities along with impressive toolsets. No matter whether you are a beginner with the PIP effect or professional making high-end video projects, FCP plug-ins can make your task much easier with their intuitive controls.

1. Tokyo PiPintor

PiPintor Free is a specially designed picture-in-picture plugin that assists beginners with easy processing of the PIP effect over Final Cut Pro platform. It simply awakes the menu-driven animation power on your tool so that picture in picture effect can be completed without key-framing.

2. ProPIP

Those who need to enjoy a higher level of customizations are advised to work over ProPIP environment. This advanced tool assists users to showcase their abilities with full freedom for personalization.

ProPIP is the best choice for newscasting, commentaries, and many other applications. It helps in generating fine controls for initial as well as end position, rotation, and scaling effects along with easy-to-use media controls over the screen. ProPIP also provides personalized borders with endless opportunities to develop impressive projects on Final Cut Pro platform.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

This tool can help you to use the picture-in-picture effect with ease. However, the process for adding this effect cannot be completed within one r two steps.

How to Create PIP Effect with FCP

If you are ready with two videos and now want to bring them to the same screen then prefer to follow these simple steps:

Step 1: Add Background video

Step 2: Add PIP videos

Note that lower clips use to stay in the background in final results whereas upper clips will appear in the foreground. By default, both clips use to have 100% full screen with 100% opaque settings.

Step 3: Apply PIP effect

Step 4: Adjust PIP Effect

If you want to scale this image in a symmetrical fashion then simply drag the dot to the corner from the central position.
Now hold the option key and drag one dot to the corner. It will help you to shrink as well as to enlarge the image even without affecting its actual aspect ratio.
Users can keep on scaling this foreground image till the time they achieve essential size.
Now click inside your selected image and start dragging it to reach a certain specific position. You can place it anywhere on a big screen.

Step 5: Follow precise Adjustment

Step 6: Apply Cross- Dissolve

Now choose the leading edge of effect and use Command + T. It will immediately apply the default cross-dissolve option for starting clip.
You will be glad to know that the PIP effect does not restrict users to work just upon a single image rather it can be used to process as many pictures as your project needs and that can fit inside the frame.

Check this video tutorial to know more details:

Picture in Picture Plug-ins for Final Cut Pro

1. Tokyo PiPintor

2. ProPIP

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

This tool can help you to use the picture-in-picture effect with ease. However, the process for adding this effect cannot be completed within one r two steps.

How to Create PIP Effect with FCP

If you are ready with two videos and now want to bring them to the same screen then prefer to follow these simple steps:

Step 1: Add Background video

Step 2: Add PIP videos

Note that lower clips use to stay in the background in final results whereas upper clips will appear in the foreground. By default, both clips use to have 100% full screen with 100% opaque settings.

Step 3: Apply PIP effect

Step 4: Adjust PIP Effect

If you want to scale this image in a symmetrical fashion then simply drag the dot to the corner from the central position.
Now hold the option key and drag one dot to the corner. It will help you to shrink as well as to enlarge the image even without affecting its actual aspect ratio.
Users can keep on scaling this foreground image till the time they achieve essential size.
Now click inside your selected image and start dragging it to reach a certain specific position. You can place it anywhere on a big screen.

Step 5: Follow precise Adjustment

Step 6: Apply Cross- Dissolve

Now choose the leading edge of effect and use Command + T. It will immediately apply the default cross-dissolve option for starting clip.
You will be glad to know that the PIP effect does not restrict users to work just upon a single image rather it can be used to process as many pictures as your project needs and that can fit inside the frame.

Check this video tutorial to know more details:

Picture in Picture Plug-ins for Final Cut Pro

1. Tokyo PiPintor

2. ProPIP

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

This tool can help you to use the picture-in-picture effect with ease. However, the process for adding this effect cannot be completed within one r two steps.

How to Create PIP Effect with FCP

If you are ready with two videos and now want to bring them to the same screen then prefer to follow these simple steps:

Step 1: Add Background video

Step 2: Add PIP videos

Note that lower clips use to stay in the background in final results whereas upper clips will appear in the foreground. By default, both clips use to have 100% full screen with 100% opaque settings.

Step 3: Apply PIP effect

Step 4: Adjust PIP Effect

If you want to scale this image in a symmetrical fashion then simply drag the dot to the corner from the central position.
Now hold the option key and drag one dot to the corner. It will help you to shrink as well as to enlarge the image even without affecting its actual aspect ratio.
Users can keep on scaling this foreground image till the time they achieve essential size.
Now click inside your selected image and start dragging it to reach a certain specific position. You can place it anywhere on a big screen.

Step 5: Follow precise Adjustment

Step 6: Apply Cross- Dissolve

Now choose the leading edge of effect and use Command + T. It will immediately apply the default cross-dissolve option for starting clip.
You will be glad to know that the PIP effect does not restrict users to work just upon a single image rather it can be used to process as many pictures as your project needs and that can fit inside the frame.

Check this video tutorial to know more details:

Picture in Picture Plug-ins for Final Cut Pro

1. Tokyo PiPintor

2. ProPIP

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Final Cut Pro X Title Templates: How to Use and Customize Them

How to Add Titles in Final Cut Pro X

Benjamin Arango

Mar 27, 2024• Proven solutions

We add text titles to our projects to tell the audience something they can’t figure out on their own, such as the title of our program, the name of the person speaking, or technical details about a subject.

This is a basic tutorial about Apple Final Cut Pro X, professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Final Cut Pro X has almost 200 different text effects that we can add, but the process of adding titles is essentially the same. Adding titles is what this article is about.

DEFINITIONS

Just to keep us all on the same page, here are my definitions of key terms related to text:

Text or titles. Words placed on the screen. I use these terms interchangeably.
Superimpose. Text displayed on the the screen with other video below it. These are also called “supers” or “keys.”
Full-screen. Text which occupies the entire screen.
Lower-third. Text which fits below a person talking; in the “lower-third” of the screen.
Info-graphics. Full-screen text which is superimposed on a graphic, generally used to convey technical information. Typical uses are sports statistics or other information which is easier to convey using text than having someone read the words.

JUST THE BASICS

I’d like to introduce “Yertle,” he’s a sea turtle and the star of this article. (Footage courtesy of Jim Walker and Lobsters Gone Wild Productions.)

At its simplest, we use titles to display his (its?) name.

In the Timeline, put the playhead where you want a title to appear and type Shift+Control+T. This inserts the default lower-third title at the position of the playhead. The title, like almost all titles, has a default duration of 10:00 seconds.

Look at the Browser and see the results of your work. A lower-third title is superimposed over the video in the lower left corner. (I’ll talk about formatting the text in a few paragraphs.)

NOTE: The big limitation of this lower-third title is that it can only be positioned in the left corner. Moving it to the center or right corner requires manual adjustment.

You position or trim a title the same as any video clip: drag the clip to a different location, or drag an edge to change its duration.

Select that title and delete it by pressing the Delete key.

This time, type Control+T and the default full-screen title appears in the center of the screen. Again, this has a default duration of 10 seconds.

If you look right in the center of the screen, you’ll see the word “Title.” Yes, its darn near invisible. And, yes, it looks, um, ugly. However, we have a TON of formatting control to make this look however we want.

Select and delete that full-screen title.

There’s one more way to apply a title: dragging from the Titles Browser.

Click the Title icon in the Toolbar. This displays the contents of the Title Browser. The column on the left displays title categories, the icons on the right indicate individual titles, the search box at the bottom allows you to search for specific titles by name, while the number in the lower right indicates the number of titles currently displayed. (Your number may not match mine because I’ve added a few custom titles to my system.)

Let’s add a totally ridiculous title to our turtle - drag Clouds from the Title Browser and place it above the clip at the point where you want a title to appear.

NOTE: I’m using a marker in the Timeline to help me find the same place in a clip so my screen shots are consistent. Markers are not needed in any way for titles.

Um, yeah. So, some titles look more professional than others… You can delete this title now.

So, we:

Add titles using keyboard shortcuts
Drag titles from the Title Browser
Change position by dragging the title
Change duration by dragging the edge of the clip
Delete a title by selecting it and pressing the Delete key

CHANGING TEXT

Add a new full-screen title (type Control+T) to the Timeline. To change the text in a title, double-click it in the Viewer. Here, I’ve changed my title to “An Undersea Adventure.”

NOTE: We can also change the text using the Inspector. I’ll show you how in a few paragraphs. Pick whichever method is easiest for you.

All text, in any title, can be changed by double-clicking it in the Viewer to select it, then typing the new text you want to use.

FORMATTING TEXT

You can format any text that you can select. This means that you can format entire phrases, words, or individual letters differently. For this article, I will format everything the same, because once you know how this works, you can experiment on your own.

Here, I selected my entire title and opened the Inspector (shortcut Cmd+4). Click the Text tab at the top. This section of the Inspector allows you to format the text.

NOTE: The text box near the top of the panel is the second place you can select text for formatting.

If you want a fast way to format text, click the word “Normal” at the top. This displays a menu filled with different text formats. Some of these formats look pretty dreadful; the rest look worse.

NOTE: You can create your own text styles. Refer to the Help for information on how.

The Basic section of the Inspector allows you to change fonts, size, alignment… all the standard font settings we see in other programs. Here, I’ve changed the font to Hobo Std, at 167 points.

While many of these settings you already know there are a few you may not:

Line spacing. Adjusts the vertical distance between lines within the same paragraph.
Tracking. Adjusts the horizontal spacing between letters.
Baseline. Adjusts the vertical spacing of text compared to the horizontal line running thru the center of the white circle in the Viewer.

The Face section allows us to change font color, opacity and blue. Outline and Glow allows us to add, not surprisingly, outlines and glows. You can adjust these as you see fit - I tend not to add outlines or glows.

However, I STRONGLY recommend adding drop shadows to all text that you want viewers to read. Video, even HD video, is low resolution compared to print. Drop shadows make your text much easier to read. These are the settings I recommend for drop shadows.

After making a few changes in the Inspector, here’s the final result. Very cool - and very different from where we started!

ACTION SAFE/TITLE SAFE ZONES

Since television was first invented, we needed to compensate for the differences in TV sets by designing graphics to stay within Action Safe and Title Safe boundaries.

While much of today’s video is designed for the web, your titles will look the best if you follow the same guidelines.

Titles015

Go to the Switch in the Viewer and select “Show Action Safe/Title Safe Zones.”

This displays two pale rectangles in the frame. The outer rectangle is called “Action Safe,” the inner one is called “Title Safe.” Action Safe is 5% in from all edges; Title Safe is 10% in from all edges.

When designing text and graphics for the web, keep all essential elements inside the outer rectangle. When designing graphics and text for broadcast or cable, keep all essential elements inside the inner rectangle.

Here, for example, notice that my title is fully contained within Action Safe.

SUMMARY

Titles give our programs character and personality, plus they explain what’s going on to the audience. Final Cut Pro X provides a wealth of formatting options to make our text look great.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Final Cut Pro X has almost 200 different text effects that we can add, but the process of adding titles is essentially the same. Adding titles is what this article is about.

DEFINITIONS

Just to keep us all on the same page, here are my definitions of key terms related to text:

Text or titles. Words placed on the screen. I use these terms interchangeably.
Superimpose. Text displayed on the the screen with other video below it. These are also called “supers” or “keys.”
Full-screen. Text which occupies the entire screen.
Lower-third. Text which fits below a person talking; in the “lower-third” of the screen.
Info-graphics. Full-screen text which is superimposed on a graphic, generally used to convey technical information. Typical uses are sports statistics or other information which is easier to convey using text than having someone read the words.

JUST THE BASICS

I’d like to introduce “Yertle,” he’s a sea turtle and the star of this article. (Footage courtesy of Jim Walker and Lobsters Gone Wild Productions.)

At its simplest, we use titles to display his (its?) name.

Look at the Browser and see the results of your work. A lower-third title is superimposed over the video in the lower left corner. (I’ll talk about formatting the text in a few paragraphs.)

NOTE: The big limitation of this lower-third title is that it can only be positioned in the left corner. Moving it to the center or right corner requires manual adjustment.

You position or trim a title the same as any video clip: drag the clip to a different location, or drag an edge to change its duration.

Select that title and delete it by pressing the Delete key.

This time, type Control+T and the default full-screen title appears in the center of the screen. Again, this has a default duration of 10 seconds.

Select and delete that full-screen title.

There’s one more way to apply a title: dragging from the Titles Browser.

Let’s add a totally ridiculous title to our turtle - drag Clouds from the Title Browser and place it above the clip at the point where you want a title to appear.

NOTE: I’m using a marker in the Timeline to help me find the same place in a clip so my screen shots are consistent. Markers are not needed in any way for titles.

Um, yeah. So, some titles look more professional than others… You can delete this title now.

So, we:

Add titles using keyboard shortcuts
Drag titles from the Title Browser
Change position by dragging the title
Change duration by dragging the edge of the clip
Delete a title by selecting it and pressing the Delete key

CHANGING TEXT

Add a new full-screen title (type Control+T) to the Timeline. To change the text in a title, double-click it in the Viewer. Here, I’ve changed my title to “An Undersea Adventure.”

NOTE: We can also change the text using the Inspector. I’ll show you how in a few paragraphs. Pick whichever method is easiest for you.

All text, in any title, can be changed by double-clicking it in the Viewer to select it, then typing the new text you want to use.

FORMATTING TEXT

Here, I selected my entire title and opened the Inspector (shortcut Cmd+4). Click the Text tab at the top. This section of the Inspector allows you to format the text.

NOTE: The text box near the top of the panel is the second place you can select text for formatting.

NOTE: You can create your own text styles. Refer to the Help for information on how.

The Basic section of the Inspector allows you to change fonts, size, alignment… all the standard font settings we see in other programs. Here, I’ve changed the font to Hobo Std, at 167 points.

While many of these settings you already know there are a few you may not:

Line spacing. Adjusts the vertical distance between lines within the same paragraph.
Tracking. Adjusts the horizontal spacing between letters.
Baseline. Adjusts the vertical spacing of text compared to the horizontal line running thru the center of the white circle in the Viewer.

After making a few changes in the Inspector, here’s the final result. Very cool - and very different from where we started!

ACTION SAFE/TITLE SAFE ZONES

Since television was first invented, we needed to compensate for the differences in TV sets by designing graphics to stay within Action Safe and Title Safe boundaries.

While much of today’s video is designed for the web, your titles will look the best if you follow the same guidelines.

Titles015

Go to the Switch in the Viewer and select “Show Action Safe/Title Safe Zones.”

Here, for example, notice that my title is fully contained within Action Safe.

SUMMARY

Titles give our programs character and personality, plus they explain what’s going on to the audience. Final Cut Pro X provides a wealth of formatting options to make our text look great.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Final Cut Pro X has almost 200 different text effects that we can add, but the process of adding titles is essentially the same. Adding titles is what this article is about.

DEFINITIONS

Just to keep us all on the same page, here are my definitions of key terms related to text:

Text or titles. Words placed on the screen. I use these terms interchangeably.
Superimpose. Text displayed on the the screen with other video below it. These are also called “supers” or “keys.”
Full-screen. Text which occupies the entire screen.
Lower-third. Text which fits below a person talking; in the “lower-third” of the screen.
Info-graphics. Full-screen text which is superimposed on a graphic, generally used to convey technical information. Typical uses are sports statistics or other information which is easier to convey using text than having someone read the words.

JUST THE BASICS

I’d like to introduce “Yertle,” he’s a sea turtle and the star of this article. (Footage courtesy of Jim Walker and Lobsters Gone Wild Productions.)

At its simplest, we use titles to display his (its?) name.

Look at the Browser and see the results of your work. A lower-third title is superimposed over the video in the lower left corner. (I’ll talk about formatting the text in a few paragraphs.)

NOTE: The big limitation of this lower-third title is that it can only be positioned in the left corner. Moving it to the center or right corner requires manual adjustment.

You position or trim a title the same as any video clip: drag the clip to a different location, or drag an edge to change its duration.

Select that title and delete it by pressing the Delete key.

This time, type Control+T and the default full-screen title appears in the center of the screen. Again, this has a default duration of 10 seconds.

Select and delete that full-screen title.

There’s one more way to apply a title: dragging from the Titles Browser.

Let’s add a totally ridiculous title to our turtle - drag Clouds from the Title Browser and place it above the clip at the point where you want a title to appear.

NOTE: I’m using a marker in the Timeline to help me find the same place in a clip so my screen shots are consistent. Markers are not needed in any way for titles.

Um, yeah. So, some titles look more professional than others… You can delete this title now.

So, we:

Add titles using keyboard shortcuts
Drag titles from the Title Browser
Change position by dragging the title
Change duration by dragging the edge of the clip
Delete a title by selecting it and pressing the Delete key

CHANGING TEXT

Add a new full-screen title (type Control+T) to the Timeline. To change the text in a title, double-click it in the Viewer. Here, I’ve changed my title to “An Undersea Adventure.”

NOTE: We can also change the text using the Inspector. I’ll show you how in a few paragraphs. Pick whichever method is easiest for you.

All text, in any title, can be changed by double-clicking it in the Viewer to select it, then typing the new text you want to use.

FORMATTING TEXT

Here, I selected my entire title and opened the Inspector (shortcut Cmd+4). Click the Text tab at the top. This section of the Inspector allows you to format the text.

NOTE: The text box near the top of the panel is the second place you can select text for formatting.

NOTE: You can create your own text styles. Refer to the Help for information on how.

The Basic section of the Inspector allows you to change fonts, size, alignment… all the standard font settings we see in other programs. Here, I’ve changed the font to Hobo Std, at 167 points.

While many of these settings you already know there are a few you may not:

Line spacing. Adjusts the vertical distance between lines within the same paragraph.
Tracking. Adjusts the horizontal spacing between letters.
Baseline. Adjusts the vertical spacing of text compared to the horizontal line running thru the center of the white circle in the Viewer.

After making a few changes in the Inspector, here’s the final result. Very cool - and very different from where we started!

ACTION SAFE/TITLE SAFE ZONES

Since television was first invented, we needed to compensate for the differences in TV sets by designing graphics to stay within Action Safe and Title Safe boundaries.

While much of today’s video is designed for the web, your titles will look the best if you follow the same guidelines.

Titles015

Go to the Switch in the Viewer and select “Show Action Safe/Title Safe Zones.”

Here, for example, notice that my title is fully contained within Action Safe.

SUMMARY

Titles give our programs character and personality, plus they explain what’s going on to the audience. Final Cut Pro X provides a wealth of formatting options to make our text look great.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Final Cut Pro X has almost 200 different text effects that we can add, but the process of adding titles is essentially the same. Adding titles is what this article is about.

DEFINITIONS

Just to keep us all on the same page, here are my definitions of key terms related to text:

Text or titles. Words placed on the screen. I use these terms interchangeably.
Superimpose. Text displayed on the the screen with other video below it. These are also called “supers” or “keys.”
Full-screen. Text which occupies the entire screen.
Lower-third. Text which fits below a person talking; in the “lower-third” of the screen.
Info-graphics. Full-screen text which is superimposed on a graphic, generally used to convey technical information. Typical uses are sports statistics or other information which is easier to convey using text than having someone read the words.

JUST THE BASICS

I’d like to introduce “Yertle,” he’s a sea turtle and the star of this article. (Footage courtesy of Jim Walker and Lobsters Gone Wild Productions.)

At its simplest, we use titles to display his (its?) name.

Look at the Browser and see the results of your work. A lower-third title is superimposed over the video in the lower left corner. (I’ll talk about formatting the text in a few paragraphs.)

NOTE: The big limitation of this lower-third title is that it can only be positioned in the left corner. Moving it to the center or right corner requires manual adjustment.

You position or trim a title the same as any video clip: drag the clip to a different location, or drag an edge to change its duration.

Select that title and delete it by pressing the Delete key.

This time, type Control+T and the default full-screen title appears in the center of the screen. Again, this has a default duration of 10 seconds.

Select and delete that full-screen title.

There’s one more way to apply a title: dragging from the Titles Browser.

Let’s add a totally ridiculous title to our turtle - drag Clouds from the Title Browser and place it above the clip at the point where you want a title to appear.

NOTE: I’m using a marker in the Timeline to help me find the same place in a clip so my screen shots are consistent. Markers are not needed in any way for titles.

Um, yeah. So, some titles look more professional than others… You can delete this title now.

So, we:

Add titles using keyboard shortcuts
Drag titles from the Title Browser
Change position by dragging the title
Change duration by dragging the edge of the clip
Delete a title by selecting it and pressing the Delete key

CHANGING TEXT

Add a new full-screen title (type Control+T) to the Timeline. To change the text in a title, double-click it in the Viewer. Here, I’ve changed my title to “An Undersea Adventure.”

NOTE: We can also change the text using the Inspector. I’ll show you how in a few paragraphs. Pick whichever method is easiest for you.

All text, in any title, can be changed by double-clicking it in the Viewer to select it, then typing the new text you want to use.

FORMATTING TEXT

Here, I selected my entire title and opened the Inspector (shortcut Cmd+4). Click the Text tab at the top. This section of the Inspector allows you to format the text.

NOTE: The text box near the top of the panel is the second place you can select text for formatting.

NOTE: You can create your own text styles. Refer to the Help for information on how.

The Basic section of the Inspector allows you to change fonts, size, alignment… all the standard font settings we see in other programs. Here, I’ve changed the font to Hobo Std, at 167 points.

While many of these settings you already know there are a few you may not:

Line spacing. Adjusts the vertical distance between lines within the same paragraph.
Tracking. Adjusts the horizontal spacing between letters.
Baseline. Adjusts the vertical spacing of text compared to the horizontal line running thru the center of the white circle in the Viewer.

After making a few changes in the Inspector, here’s the final result. Very cool - and very different from where we started!

ACTION SAFE/TITLE SAFE ZONES

Since television was first invented, we needed to compensate for the differences in TV sets by designing graphics to stay within Action Safe and Title Safe boundaries.

While much of today’s video is designed for the web, your titles will look the best if you follow the same guidelines.

Titles015

Go to the Switch in the Viewer and select “Show Action Safe/Title Safe Zones.”

Here, for example, notice that my title is fully contained within Action Safe.

SUMMARY

Titles give our programs character and personality, plus they explain what’s going on to the audience. Final Cut Pro X provides a wealth of formatting options to make our text look great.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Unlock the Power of Slow Motion: A Kapwing Video Editing Tutorial

Change Video Speed Easily

Wondershare Filmora is one of the most popular video editing software among YouTubers , you can use it to speed up and slow down videos with Speed Ramping or Uniform Speed tools.

Try It Free Try It Free

Kapwing is a web-based video editor that enables you to perform post-production actions on the clips that you upload. In addition, the web app has a timeline at the bottom of the interface that uses the layer-oriented approach to give you an industry-standard ambiance while editing.

With Kapwing, you can even create basic to advanced clips by starting a new project from the scratch. Some of the tasks that Kapwing can do quite efficiently include:

Adding text and titles to the videos
Reversing the playback
Inserting royalty-free video clips and images from its built-in media library
Recording computer screen
Recording webcam footage
Adding audio, etc.

With that said, here you will learn how to slow down the playback speed of a video with Kapwing to give the clip a cinematic effect.

Part 1: How to Make a Slow Motion Video on Kapwing? [Step by Step]

Note: Before proceeding further, it is imperative to understand that Kapwing adds a watermark to the videos while exporting as long as you are not signed in. This limitation can be removed by signing in using your Google or Facebook ID, or with a different email address provided by some other service provider.

To make a slow-motion video with Kapwing, you must follow the step-by-step instructions that are given below:

Step 1: Sign In and Upload the Source Video to Kapwing

Launch your favorite browser (Google Chrome is used here), go to https://www.kapwing.com/ , and click Sign In from the top-right corner of the web page. Next, use your preferred platform, i.e., Google or Facebook, or use a different email address to sign in. On the next page, click Create New Project.

When the main interface opens up, click Click to upload from the right section, and select and upload the source video that you want to slow down. Alternatively, you can either paste the URL of a published video in the available field, or upload one from your Google Drive or Google Photos storage by clicking their corresponding icons below the Click to upload button.

Step 2: Slow Down the Playback Speed

Ensure that the uploaded video is successfully added to the Timeline at the bottom, click to select the clip if not already selected, confirm that the EDIT tab is selected from the top of the right pane, and use the – and + buttons under the SPEED section to decrease and increase the playback speed of the footage respectively.

To make a slow motion with Kapwing, you can click the – icon and choose 0.25X, 0.5X and 0.75X slower based on your need. You can see the changes in the timeline when you apply the speed presets.

Note: You can slow down or increase the speed to as low as 0.25x or as high as 4x respectively.

Step 3: Add Additional Decorations (Optional)

Use the tools available in the toolbox on the left to add other elements like text, stock video clips, images, audio, etc. to make the footage look more professional and appealing.

Step 4: Export and Download the Video

Once everything is done, click the Play button above the Timeline to preview the clip, and once found acceptable, click Export Video from the top-right area to export the footage.

On the next page, click Download from the right to download the slow-motion video to your local hard drive. Alternatively, you can also click the down icon that is present next to the Export Video button, and choose your preferred format from the menu to export the video.

Note: Kapwing makes the produced videos available for public viewing while using a free account. This privacy vulnerability can be removed by subscribing to a paid plan offered by the web tool. And for free account, your video is limited to 250MB uploading, and 30 minutes long exporting.

There are some other options to slow videos online for free, check our picks of best free online slow motion video editors.

Part 2: FAQs About Kapwing Online Video Editor

1. Is Kapwing really free?

Yes, it is free, and there will be no watermark on videos under 5 minutes. However, upon exporting, the videos remain available for the public which could be a breach of privacy for some users. This limitation can be removed by subscribing to the web tool’s paid membership. You can choose either a $192 per year or $24 per month plan for the subscription.

2. What is the limitation of using the Kapwing free plan?

When you use Kapwing with the free plan:

All the videos that you produce remain available for the public viewing;
The video files that you upload cannot exceed 250MB in size;
Export 3 hours of video per month, and each video is limited to 30 minutes long;
The resolution of the videos is restricted to 720p only, etc.

3. How slow can I make it with Kapwing?

You can slow down the playback speed to 0.25x with Kapwing. When increasing the speed, it can go up to 4x.

Conclusion

Kapwing is an efficient online video editor. The best part is, the tool doesn’t add a watermark to the videos even if you are using its free plan. However, certain restrictions like file size limit, resolution threshold, etc. are imposed on you if you are a non-paid user. To get rid of all such barriers, you must subscribe to a monthly or annual plan that is $24 or $192 respectively.

Try It Free Try It Free

With Kapwing, you can even create basic to advanced clips by starting a new project from the scratch. Some of the tasks that Kapwing can do quite efficiently include:

Adding text and titles to the videos
Reversing the playback
Inserting royalty-free video clips and images from its built-in media library
Recording computer screen
Recording webcam footage
Adding audio, etc.

With that said, here you will learn how to slow down the playback speed of a video with Kapwing to give the clip a cinematic effect.

Part 1: How to Make a Slow Motion Video on Kapwing? [Step by Step]

To make a slow-motion video with Kapwing, you must follow the step-by-step instructions that are given below:

Step 1: Sign In and Upload the Source Video to Kapwing

Step 2: Slow Down the Playback Speed

To make a slow motion with Kapwing, you can click the – icon and choose 0.25X, 0.5X and 0.75X slower based on your need. You can see the changes in the timeline when you apply the speed presets.

Note: You can slow down or increase the speed to as low as 0.25x or as high as 4x respectively.

Step 3: Add Additional Decorations (Optional)

Use the tools available in the toolbox on the left to add other elements like text, stock video clips, images, audio, etc. to make the footage look more professional and appealing.

Step 4: Export and Download the Video

Once everything is done, click the Play button above the Timeline to preview the clip, and once found acceptable, click Export Video from the top-right area to export the footage.

There are some other options to slow videos online for free, check our picks of best free online slow motion video editors.

Part 2: FAQs About Kapwing Online Video Editor

1. Is Kapwing really free?

2. What is the limitation of using the Kapwing free plan?

When you use Kapwing with the free plan:

All the videos that you produce remain available for the public viewing;
The video files that you upload cannot exceed 250MB in size;
Export 3 hours of video per month, and each video is limited to 30 minutes long;
The resolution of the videos is restricted to 720p only, etc.

3. How slow can I make it with Kapwing?

You can slow down the playback speed to 0.25x with Kapwing. When increasing the speed, it can go up to 4x.

Conclusion

Try It Free Try It Free

With Kapwing, you can even create basic to advanced clips by starting a new project from the scratch. Some of the tasks that Kapwing can do quite efficiently include:

Adding text and titles to the videos
Reversing the playback
Inserting royalty-free video clips and images from its built-in media library
Recording computer screen
Recording webcam footage
Adding audio, etc.

With that said, here you will learn how to slow down the playback speed of a video with Kapwing to give the clip a cinematic effect.

Part 1: How to Make a Slow Motion Video on Kapwing? [Step by Step]

To make a slow-motion video with Kapwing, you must follow the step-by-step instructions that are given below:

Step 1: Sign In and Upload the Source Video to Kapwing

Step 2: Slow Down the Playback Speed

To make a slow motion with Kapwing, you can click the – icon and choose 0.25X, 0.5X and 0.75X slower based on your need. You can see the changes in the timeline when you apply the speed presets.

Note: You can slow down or increase the speed to as low as 0.25x or as high as 4x respectively.

Step 3: Add Additional Decorations (Optional)

Use the tools available in the toolbox on the left to add other elements like text, stock video clips, images, audio, etc. to make the footage look more professional and appealing.

Step 4: Export and Download the Video

Once everything is done, click the Play button above the Timeline to preview the clip, and once found acceptable, click Export Video from the top-right area to export the footage.

There are some other options to slow videos online for free, check our picks of best free online slow motion video editors.

Part 2: FAQs About Kapwing Online Video Editor

1. Is Kapwing really free?

2. What is the limitation of using the Kapwing free plan?

When you use Kapwing with the free plan:

All the videos that you produce remain available for the public viewing;
The video files that you upload cannot exceed 250MB in size;
Export 3 hours of video per month, and each video is limited to 30 minutes long;
The resolution of the videos is restricted to 720p only, etc.

3. How slow can I make it with Kapwing?

You can slow down the playback speed to 0.25x with Kapwing. When increasing the speed, it can go up to 4x.

Conclusion

Try It Free Try It Free

With Kapwing, you can even create basic to advanced clips by starting a new project from the scratch. Some of the tasks that Kapwing can do quite efficiently include:

Adding text and titles to the videos
Reversing the playback
Inserting royalty-free video clips and images from its built-in media library
Recording computer screen
Recording webcam footage
Adding audio, etc.

With that said, here you will learn how to slow down the playback speed of a video with Kapwing to give the clip a cinematic effect.

Part 1: How to Make a Slow Motion Video on Kapwing? [Step by Step]

To make a slow-motion video with Kapwing, you must follow the step-by-step instructions that are given below:

Step 1: Sign In and Upload the Source Video to Kapwing

Step 2: Slow Down the Playback Speed

To make a slow motion with Kapwing, you can click the – icon and choose 0.25X, 0.5X and 0.75X slower based on your need. You can see the changes in the timeline when you apply the speed presets.

Note: You can slow down or increase the speed to as low as 0.25x or as high as 4x respectively.

Step 3: Add Additional Decorations (Optional)

Use the tools available in the toolbox on the left to add other elements like text, stock video clips, images, audio, etc. to make the footage look more professional and appealing.

Step 4: Export and Download the Video

Once everything is done, click the Play button above the Timeline to preview the clip, and once found acceptable, click Export Video from the top-right area to export the footage.

There are some other options to slow videos online for free, check our picks of best free online slow motion video editors.

Part 2: FAQs About Kapwing Online Video Editor

1. Is Kapwing really free?

2. What is the limitation of using the Kapwing free plan?

When you use Kapwing with the free plan:

All the videos that you produce remain available for the public viewing;
The video files that you upload cannot exceed 250MB in size;
Export 3 hours of video per month, and each video is limited to 30 minutes long;
The resolution of the videos is restricted to 720p only, etc.

3. How slow can I make it with Kapwing?

You can slow down the playback speed to 0.25x with Kapwing. When increasing the speed, it can go up to 4x.

Conclusion

The Ultimate Shortcut: Changing Video Ratio with Ease

How to Change Ratio of Video in a Quick & Easy Way

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

It is important that how your video appears on the screen and for this aspect ratio is one of the most important factors. Several times, when your video appears awkward or cropped on a certain site or a device, it means that its aspect ratio is not correct and the best solution here is to change the aspect ratio. Using related software and programs this task can be done easily.

The article will throw more light on these tools that can change ratio of video.

Part 1 What is Aspect Ratio and Why Does It Matter?

Aspect ratio is the relationship between the width and the height of the video and it defines how your video will appear on the screen. The right aspect ratio is important to offer a pleasing viewing experience. With multiple social media sites supporting different aspect ratios, the need for changing them accordingly arises quite often.

The marketing, business, and all other activities have taken an online route and with this, the video content on several social media sites for promotion has also increased. So, if you upload a video with a certain aspect ratio on a different platform, they will look weird with cropped portions, black borders, and other issues that will lead to a negative viewing experience and impact.

Though there is no fixed or standard aspect ratio that can be considered as the best as different values are suitable for different platforms and sites. Some of the commonly used aspect ratios are as below.

● 16:9- This is one of the most widely used aspect ratios and appears in the form of a wide rectangle. The majority of the video players as well as capturing devices use this aspect ratio as their default settings. The best resolution that can be used with this aspect ratio is 3840 X 2160 pixels.

● 1:1- Originally this aspect ratio was used for square TV sets but now it is majorly used for the videos on Instagram and Facebook. A lot of cameras also support this setting.

● 9:16- The setting for this aspect ratio has become popular after the increased use of smartphones. Used for the tall videos, the setting can be seen in the videos posted as an Instagram story, Snapchat, and Facebook.

● 21:9 – This setting of the aspect ratio is used for cinematic widescreen or videos with the anamorphic format. The use of this aspect ratio is very particular and videos supporting this setting generally can be seen in theme parks, special theatres, and museums.

Regarding social media sites, below listed are the popularly used aspect ratio.

● Square (1:1) – Used for Facebook and Instagram feed videos.

● Vertical (9:16) – Best for Instagram story videos and snaps

● Horizontal (16:9) – Used for (9:16 YouTube videos

● Landscape (5:4) – Apt for landscape videos on Facebook and Twitter.

● Portrait (4:5) – Used for the portrait videos to be posted on Twitter and Facebook.

● For the Facebook cover video, 21:9 is the recommended aspect ratio.

Part 2 Difference Between Aspect Ratio and Resolution

Aspect ratio and resolution are interrelated and go hand-in-hand. For a certain aspect ratio, there is several counterparts’ resolution that can be used. While the aspect ratio defines the width and the height relationship, the resolution is the number of pixels on the screen.

To obtain the resolution of a video, you will multiply the height by the width while for the aspect ratio, width is divided by the height. When the height is multiplied by its width times, the results you get represent the square pixels of your screen and this number dented the quality of the video. The higher the pixels, the higher will be the video quality.

5 Quick Ways to Change Video Aspect Ratio on Windows and Mac

To make your videos suitable for different platforms and sites, you would need to change the aspect ratio, and to get this task done there are several windows and Mac-based tools available. Listed below are the top ones that will let process the videos quickly.

● VideoProc Converter

This is a Windows and Mac-based full-featured software that allows performing multiple tasks like changing the aspect ratio, editing videos, converting files, and more. Using the program, you can easily change the aspect ratio without any quality loss and without adding any black bars or video stretching. Further video customization as needed can also be done using the tool.

Steps to change the aspect ratio

Step 1. Download, install, and run the software on your system and select the Video option.

Step 2. To add the video, click on the + Video button. Next, choose the target format for the video.

Step 3. Next to change the aspect ratio of the video you can either resize the video or can crop it. While resizing the video, you will need to change the resolution from the Codec section. Alternatively, you can also use the Crop toolbar for selecting the desired aspect ratio from the supported options.

Step 4. Finally, choose the output folder and then click on the RUN button to start the file processing.

● AnyMP4 Video Converter Ultimate

This is a widely used video editing tool that supports multiple functions and features for video customization. Using this program on your Windows and Mac system you can change the aspect ratio of the videos using the pre-set options or manually. All popular video formats are supported by the software and the files are processed in lossless quality.

Steps to change the aspect ratio

Step 1. Run the installed software and add the video by clicking on the +Add Files button.

Step 2. Click on the Edit icon and a pop-up editing window will open. Go to the Crop section and expand the drop-down list at the Aspect Ratio. Choose the desired option. You can also change the aspect ratio manually by moving the crop box. Click on the OK button when selected.

Step 3. Next, choose the output folder, target format, and then finally click on the Convert All button to start the processing.

● MediaCoder

This is among the early transcoding tools and is known for its support of rich features for video customization. Several video parameters including aspect ratio can be adjusted using the tool and it also supports functions like conversion, disc ripping, video enhancement, and more. A wide range of formats for processing is supported by the software that is available for the Windows system.

Step to change the aspect ratio

Step 1. Launch the software and add the desired video from the File tab.

Step 2. After the video is added, choose the Picture tab at the bottom menu.

Step 3. At the Aspect Ratio section, pull the menu and choose from the available options. Other parameters can also be changed as needed.

Step 4. Choose the output folder and start processing the file.

● iMovie

To change the aspect ratio of a video on your Mac systems without installing any third-party software, iMovie works as the best tool. Using the program, you can even do basic editing simply and quickly. You can resize the videos in iMovie by simply cropping or exporting them using pre-set aspect ratio options.

Steps for iMovie aspect ratio change

Step 1. Open the iMovie on your system and tap on the Create New button at the top-left corner.

Step 2. Choose the Movie option from the drop-down menu.

Step 3. To add the video, click on the Import Media button and then tap on the Crop icon present on the top toolbar.

Step 4. Move the edges of the video and when done tap on the blue-tick icon present at the top-right corner.

Step 5. Next, click on the Share icon at the top-right corner and then the video can be saved to the desired location.

Using iMovie you can also change aspect ratio iphone video.

● Wondershare Filmora

Wondershare Filmora Video Editor is an excellent Windows and Mac-based software for changing the aspect ratio of your videos and editing it using a variety of functions. The files can be processed in lossless quality using the tool and the interface is also user-friendly. There are multiple ways by which you can change the aspect ratio using the software and these include - changing it from the starting interface, under project settings, while editing, while exporting, and with the Auto reframe option.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

The simplest of all ways is by changing the video aspect ratio from the starting interface and the steps for the same are enlisted below.

Step 1. Launch the installed software on your system.

Step 2. At the starting interface, you can choose the desired aspect ratio from the available options – 16:9, 4:3, 1:1, and 9:16.

Step 3. After the selection is done, you can add the video by clicking on the New Project and then edit the file as required using several features.

The above steps can be used to change aspect ratio MP4 as well as all other popular formats.

Step 4. After the video settings are done you can process it and save it at the desired location.

To edit the aspect ratio using other ways, you can check out the detailshere .

Key Takeaways from This Episode

● Aspect ratio defines how a video will appear on a different screen, social media sites, and platforms.

● To use the same video on multiple platforms, you need to change its aspect ratio and for this, good software is needed.

● An array of aspect ratio changer tools for Windows and Mac are available. Wondershare Filmora is one such feature-packed tool that can process your files in lossless quality with added features.

Try It Free Try It Free

The article will throw more light on these tools that can change ratio of video.

Part 1 What is Aspect Ratio and Why Does It Matter?

● 1:1- Originally this aspect ratio was used for square TV sets but now it is majorly used for the videos on Instagram and Facebook. A lot of cameras also support this setting.

Regarding social media sites, below listed are the popularly used aspect ratio.

● Square (1:1) – Used for Facebook and Instagram feed videos.

● Vertical (9:16) – Best for Instagram story videos and snaps

● Horizontal (16:9) – Used for (9:16 YouTube videos

● Landscape (5:4) – Apt for landscape videos on Facebook and Twitter.

● Portrait (4:5) – Used for the portrait videos to be posted on Twitter and Facebook.

● For the Facebook cover video, 21:9 is the recommended aspect ratio.

Part 2 Difference Between Aspect Ratio and Resolution

5 Quick Ways to Change Video Aspect Ratio on Windows and Mac

● VideoProc Converter

Steps to change the aspect ratio

Step 1. Download, install, and run the software on your system and select the Video option.

Step 2. To add the video, click on the + Video button. Next, choose the target format for the video.

Step 4. Finally, choose the output folder and then click on the RUN button to start the file processing.

● AnyMP4 Video Converter Ultimate

Steps to change the aspect ratio

Step 1. Run the installed software and add the video by clicking on the +Add Files button.

Step 3. Next, choose the output folder, target format, and then finally click on the Convert All button to start the processing.

● MediaCoder

Step to change the aspect ratio

Step 1. Launch the software and add the desired video from the File tab.

Step 2. After the video is added, choose the Picture tab at the bottom menu.

Step 3. At the Aspect Ratio section, pull the menu and choose from the available options. Other parameters can also be changed as needed.

Step 4. Choose the output folder and start processing the file.

● iMovie

Steps for iMovie aspect ratio change

Step 1. Open the iMovie on your system and tap on the Create New button at the top-left corner.

Step 2. Choose the Movie option from the drop-down menu.

Step 3. To add the video, click on the Import Media button and then tap on the Crop icon present on the top toolbar.

Step 4. Move the edges of the video and when done tap on the blue-tick icon present at the top-right corner.

Step 5. Next, click on the Share icon at the top-right corner and then the video can be saved to the desired location.

Using iMovie you can also change aspect ratio iphone video.

● Wondershare Filmora

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

The simplest of all ways is by changing the video aspect ratio from the starting interface and the steps for the same are enlisted below.

Step 1. Launch the installed software on your system.

Step 2. At the starting interface, you can choose the desired aspect ratio from the available options – 16:9, 4:3, 1:1, and 9:16.

Step 3. After the selection is done, you can add the video by clicking on the New Project and then edit the file as required using several features.

The above steps can be used to change aspect ratio MP4 as well as all other popular formats.

Step 4. After the video settings are done you can process it and save it at the desired location.

To edit the aspect ratio using other ways, you can check out the detailshere .

Key Takeaways from This Episode

● Aspect ratio defines how a video will appear on a different screen, social media sites, and platforms.

● To use the same video on multiple platforms, you need to change its aspect ratio and for this, good software is needed.

● An array of aspect ratio changer tools for Windows and Mac are available. Wondershare Filmora is one such feature-packed tool that can process your files in lossless quality with added features.

Try It Free Try It Free

The article will throw more light on these tools that can change ratio of video.

Part 1 What is Aspect Ratio and Why Does It Matter?

● 1:1- Originally this aspect ratio was used for square TV sets but now it is majorly used for the videos on Instagram and Facebook. A lot of cameras also support this setting.

Regarding social media sites, below listed are the popularly used aspect ratio.

● Square (1:1) – Used for Facebook and Instagram feed videos.

● Vertical (9:16) – Best for Instagram story videos and snaps

● Horizontal (16:9) – Used for (9:16 YouTube videos

● Landscape (5:4) – Apt for landscape videos on Facebook and Twitter.

● Portrait (4:5) – Used for the portrait videos to be posted on Twitter and Facebook.

● For the Facebook cover video, 21:9 is the recommended aspect ratio.

Part 2 Difference Between Aspect Ratio and Resolution

5 Quick Ways to Change Video Aspect Ratio on Windows and Mac

● VideoProc Converter

Steps to change the aspect ratio

Step 1. Download, install, and run the software on your system and select the Video option.

Step 2. To add the video, click on the + Video button. Next, choose the target format for the video.

Step 4. Finally, choose the output folder and then click on the RUN button to start the file processing.

● AnyMP4 Video Converter Ultimate

Steps to change the aspect ratio

Step 1. Run the installed software and add the video by clicking on the +Add Files button.

Step 3. Next, choose the output folder, target format, and then finally click on the Convert All button to start the processing.

● MediaCoder

Step to change the aspect ratio

Step 1. Launch the software and add the desired video from the File tab.

Step 2. After the video is added, choose the Picture tab at the bottom menu.

Step 3. At the Aspect Ratio section, pull the menu and choose from the available options. Other parameters can also be changed as needed.

Step 4. Choose the output folder and start processing the file.

● iMovie

Steps for iMovie aspect ratio change

Step 1. Open the iMovie on your system and tap on the Create New button at the top-left corner.

Step 2. Choose the Movie option from the drop-down menu.

Step 3. To add the video, click on the Import Media button and then tap on the Crop icon present on the top toolbar.

Step 4. Move the edges of the video and when done tap on the blue-tick icon present at the top-right corner.

Step 5. Next, click on the Share icon at the top-right corner and then the video can be saved to the desired location.

Using iMovie you can also change aspect ratio iphone video.

● Wondershare Filmora

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

The simplest of all ways is by changing the video aspect ratio from the starting interface and the steps for the same are enlisted below.

Step 1. Launch the installed software on your system.

Step 2. At the starting interface, you can choose the desired aspect ratio from the available options – 16:9, 4:3, 1:1, and 9:16.

Step 3. After the selection is done, you can add the video by clicking on the New Project and then edit the file as required using several features.

The above steps can be used to change aspect ratio MP4 as well as all other popular formats.

Step 4. After the video settings are done you can process it and save it at the desired location.

To edit the aspect ratio using other ways, you can check out the detailshere .

Key Takeaways from This Episode

● Aspect ratio defines how a video will appear on a different screen, social media sites, and platforms.

● To use the same video on multiple platforms, you need to change its aspect ratio and for this, good software is needed.

● An array of aspect ratio changer tools for Windows and Mac are available. Wondershare Filmora is one such feature-packed tool that can process your files in lossless quality with added features.

Try It Free Try It Free

The article will throw more light on these tools that can change ratio of video.

Part 1 What is Aspect Ratio and Why Does It Matter?

● 1:1- Originally this aspect ratio was used for square TV sets but now it is majorly used for the videos on Instagram and Facebook. A lot of cameras also support this setting.

Regarding social media sites, below listed are the popularly used aspect ratio.

● Square (1:1) – Used for Facebook and Instagram feed videos.

● Vertical (9:16) – Best for Instagram story videos and snaps

● Horizontal (16:9) – Used for (9:16 YouTube videos

● Landscape (5:4) – Apt for landscape videos on Facebook and Twitter.

● Portrait (4:5) – Used for the portrait videos to be posted on Twitter and Facebook.

● For the Facebook cover video, 21:9 is the recommended aspect ratio.

Part 2 Difference Between Aspect Ratio and Resolution

5 Quick Ways to Change Video Aspect Ratio on Windows and Mac

● VideoProc Converter

Steps to change the aspect ratio

Step 1. Download, install, and run the software on your system and select the Video option.

Step 2. To add the video, click on the + Video button. Next, choose the target format for the video.

Step 4. Finally, choose the output folder and then click on the RUN button to start the file processing.

● AnyMP4 Video Converter Ultimate

Steps to change the aspect ratio

Step 1. Run the installed software and add the video by clicking on the +Add Files button.

Step 3. Next, choose the output folder, target format, and then finally click on the Convert All button to start the processing.

● MediaCoder

Step to change the aspect ratio

Step 1. Launch the software and add the desired video from the File tab.

Step 2. After the video is added, choose the Picture tab at the bottom menu.

Step 3. At the Aspect Ratio section, pull the menu and choose from the available options. Other parameters can also be changed as needed.

Step 4. Choose the output folder and start processing the file.

● iMovie

Steps for iMovie aspect ratio change

Step 1. Open the iMovie on your system and tap on the Create New button at the top-left corner.

Step 2. Choose the Movie option from the drop-down menu.

Step 3. To add the video, click on the Import Media button and then tap on the Crop icon present on the top toolbar.

Step 4. Move the edges of the video and when done tap on the blue-tick icon present at the top-right corner.

Step 5. Next, click on the Share icon at the top-right corner and then the video can be saved to the desired location.

Using iMovie you can also change aspect ratio iphone video.

● Wondershare Filmora

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

The simplest of all ways is by changing the video aspect ratio from the starting interface and the steps for the same are enlisted below.

Step 1. Launch the installed software on your system.

Step 2. At the starting interface, you can choose the desired aspect ratio from the available options – 16:9, 4:3, 1:1, and 9:16.

Step 3. After the selection is done, you can add the video by clicking on the New Project and then edit the file as required using several features.

The above steps can be used to change aspect ratio MP4 as well as all other popular formats.

Step 4. After the video settings are done you can process it and save it at the desired location.

To edit the aspect ratio using other ways, you can check out the detailshere .

Key Takeaways from This Episode

● Aspect ratio defines how a video will appear on a different screen, social media sites, and platforms.

● To use the same video on multiple platforms, you need to change its aspect ratio and for this, good software is needed.

● An array of aspect ratio changer tools for Windows and Mac are available. Wondershare Filmora is one such feature-packed tool that can process your files in lossless quality with added features.

Smart Video Editing

Updated In 2024, How to Create a Picture-in-Picture Effect Using Final Cut Pro

Pro Tips for Creating Stunning Picture-in-Picture Effects in Final Cut Pro

How to Create a Picture-in-Picture Effect Using Final Cut Pro

Benjamin Arango

How to Create PIP Effect with FCP

Step 1: Add Background video

Step 2: Add PIP videos

Step 3: Apply PIP effect

Step 4: Adjust PIP Effect

Step 5: Follow precise Adjustment

Step 6: Apply Cross- Dissolve

Picture in Picture Plug-ins for Final Cut Pro

1. Tokyo PiPintor

2. ProPIP

Benjamin Arango

How to Create PIP Effect with FCP

Step 1: Add Background video

Step 2: Add PIP videos

Step 3: Apply PIP effect

Step 4: Adjust PIP Effect

Step 5: Follow precise Adjustment

Step 6: Apply Cross- Dissolve

Picture in Picture Plug-ins for Final Cut Pro

1. Tokyo PiPintor

2. ProPIP

Benjamin Arango

How to Create PIP Effect with FCP

Step 1: Add Background video

Step 2: Add PIP videos

Step 3: Apply PIP effect

Step 4: Adjust PIP Effect

Step 5: Follow precise Adjustment

Step 6: Apply Cross- Dissolve

Picture in Picture Plug-ins for Final Cut Pro

1. Tokyo PiPintor

2. ProPIP

Benjamin Arango

How to Create PIP Effect with FCP

Step 1: Add Background video

Step 2: Add PIP videos

Step 3: Apply PIP effect

Step 4: Adjust PIP Effect

Step 5: Follow precise Adjustment

Step 6: Apply Cross- Dissolve

Picture in Picture Plug-ins for Final Cut Pro

1. Tokyo PiPintor

2. ProPIP

Final Cut Pro X Title Templates: How to Use and Customize Them

How to Add Titles in Final Cut Pro X

Benjamin Arango

DEFINITIONS

JUST THE BASICS

CHANGING TEXT

FORMATTING TEXT

ACTION SAFE/TITLE SAFE ZONES

SUMMARY

Benjamin Arango

DEFINITIONS

JUST THE BASICS

CHANGING TEXT

FORMATTING TEXT

ACTION SAFE/TITLE SAFE ZONES

SUMMARY

Benjamin Arango

DEFINITIONS

JUST THE BASICS

CHANGING TEXT

FORMATTING TEXT

ACTION SAFE/TITLE SAFE ZONES

SUMMARY

Benjamin Arango

DEFINITIONS

JUST THE BASICS

CHANGING TEXT

FORMATTING TEXT

ACTION SAFE/TITLE SAFE ZONES

SUMMARY

Unlock the Power of Slow Motion: A Kapwing Video Editing Tutorial

Change Video Speed Easily