Updated In 2024, From Shaky to Steady 3 Proven Methods for AE Video Stabilization

MdadeLe Lv12

2024-05-19 08:28:54 2024-05-19 08:28:54 Created 2024-05-20 08:28:54 2024-05-20 08:28:54 Updated

ai
>
video

From Shaky to Steady: 3 Proven Methods for AE Video Stabilization

Stabilize Shaky Videos After Recording Easily

Wondershare Filmora is one of the most popular video editing software among YouTubers , which provides the video stabilization tool to remove shake from videos within one-click. Download and have a try now.

Try It Free Try It Free

Video content is becoming increasingly popular; with the proliferation of online content, practically every product now needs its mini-documentary or video clip. Experienced filmmakers and VFX artists used to be the only ones who could get smooth footage. Those days, however, are over.

Adobe After Effects is an excellent tool for smoothing out video footage, in addition to being a great blending and motion animation software; although it’s usually preferable to maintain your film as seamless as possible on location, it’s not the end of the world if you take a seat to edit your video and decide it’s too shaky. In truth, there are several options available to you. In After Effects, there are three options for stabilizing footage. What are they – and how to use After Effects to stabilize footage? Let’s find out!

Part 1: Stabilize Video with Built-in Warp Stabilizer in AE

The Warp Stabilizer effect is a new technique to cope with unsteady video. In this part, I will show you how to apply Warp Stabilizer to a layer, adjust the effect’s essential parameters, and demonstrate how they work briefly.

Step 1: The Warp Stabilizer is the most excellent built-in choice for After Effects. This may be found under the Distort tools section of the Effects & Presets panel. You may also go to the effects tab and look for “Warp“ in the search box.

Step 2: When you’ve identified Warp Stabilizer, you’ll have to add it to the layer you want to stabilize. You may accomplish this in one of three different ways. You may either drag and drop the filter into the chosen layer in the composing window, place it on the desired layer in the timeline, or double-tap on the effect while selecting your choice footage layer.

Step 3: Once you apply the warp stabilizer, it will start immediately. So now, all you have to do is lay back and let the stabilizer do its job.

(Note: The procedure should take no more than a few minutes, and a blue bar will appear across your composition window, indicating that the warp stabilizer is evaluating the film. The composition panel would then display an orange bar, indicating that the effect is applied).

Step 4: After stabilization, use the spacebar to begin a RAM peek. Choose the layer you added to and click to display the drop-down menu or go to the Effects Control panel whenever you need to tweak the stabilizing effect.

Part 2: Stabilize Shaky Video with Track Motion Feature in AE

Using Stabilize Motion feature to stabilize video is an old-school heritage function from the era of the Creative Suite, it will still be there in After Effects presently and performs admirably.

Step 1: The tracker panel is most likely open by default in your edition of After Effects, but if it isn’t, go to Window in the top menu to open it. Once you’ve arrived here, scroll to the bottom until you locate Tracker and double-check that it has a checkbox beside it.

Step 2: Select Stabilize Motion from the drop-down menu whenever the tracker panel is open. You’ll see that a tracker box appears in your Layer Panel once you’ve done this.

(Note: You’ll need to identify a proper location in your film for the tracker to operate at this stage. We’re monitoring a vehicle using a camera operator’s drone in the instance below).

Step 3: Let’s press the Play button on the tracker panel once we’ve set up the tracker box. The tracker box should adhere to the location or item you chose when you do this.

(Note: When your tracking points start to go astray, use the Pause button, personally modify the tracking point, and then push play to resume the journey).

Step 4: When the tracker is done and satisfied with the results, click Edit target to verify that the tracking data is transferred to the correct layer. Then proceed to the bottom of the page and click the Apply option.

(Note A dialogue window with choices for applying them. Usually, you’ll want to choose X and Y here).

Hit the spacebar to evaluate how well the stabilize motion tracker performed now when you’re back in the composition window. When you’re not pleased with the outcomes, you might have to go back to try again. Although this approach is best used for photos with a clear point of focus that doesn’t go out of frame, it could still be helpful in some situations.

Part 3: Using Stabilization Plugins for Smoother Video in AE

As a graphic and motion designer, animator, or 3D artist, After Effects plugins may completely change the way you operate. Since it can handle so much right out of the box, Adobe After Effects CC is already a go-to motion graphic and compositing program for many artists.

However, as with any good program, third-party plugins could only help you take your work to the next level by adding new features or streamlining your process.

It should be unsurprising that After Effects has many plugins for a program that is over 30 years old. Here are the best stabilization plugins for smoother video in AE:

1. Orb

Orb is focused on generating realistic planets and includes a range of unique features to make planetary creation easy. It utilizes a similar 3D engine to Video Copilot’s great Element 3D plugin, and it employs a similar 3D engine to Video Copilot’s outstanding Element 3D plugin.

You would believe that making planets in 3D is simple —create a circle, add textures, and you’re done! Getting a world to ‘look’ properly, on the other hand, might be more complicated than it appears.

For example, how can the line between night and day be altered in a model of a populated planet such that cities may be visible at night but not during the day?

Although Orb doesn’t work for every planetary picture, this would function for 90% of them and is a helpful previs tool. This is particularly true when used in conjunction with other After Effects plugins or paired with a 3D lens from a 3D program, which may be brought into After Effects with background plates for things like spacecraft.

2. Depth of Field Generator PRO (DOF PRO)

Richard Rosenman’s renowned Photoshop depth of field generator plugin, DOF PRO (Depth of Field Generator PRO), is now downloadable for After Effects. DOF PRO has become the industry’s professional option for an unprecedented and complex depth of field effects rapidly and effectively as a post-process.

This is thanks to almost a decade of discovery and application since the first launch in 2005. DOF PRO’s cutting-edge characteristics offer new and advanced technologies not found anywhere else, resulting in one of the industry’s most potent and sophisticated depth of field processors.

Capability for chromatic and achromatic aberration, focal plane bokeh distinction, astigmatism and vignetting effects, bespoke aperture maps, and noise recovery are among the advanced features.

There will also be compatibility with the alpha channel and transparency, 32-bit floating-point color, correct aperture displays, and an iris array display. A feature comparison between the plugin and After Effects’ Camera Lens Blur effect can be found here.

3. ReelSteady

ReelSteady for After Effects is a recent addition to the stabilization marketplace. ReelSteady is similar to After Effects’ warp stabilizer plugin. However, the stabilization in ReelSteady is far superior.

ReelSteady also has several other features that make it ideal for creating next-level tunes. Users may design filters to block off specific sections of your frame. This is useful for removing a subject that travels around the frame a lot.

In terms of performance, the After Effects plugin is pretty similar to the warp stabilizer but with a few more features. To begin with, ReelSteady includes a built-in rolling shutter repair tool that operates in tandem with its built-in stabilizer.

The ReelSteady effect is a two-pass effect. For instance, after the effect has been executed for the first time, you will likely wish to level out certain places. You’ll successfully isolate specific parts in the effect to “iron out” sections of the footage.

You would like to record your film at a more excellent resolution than your expected outcome to get the most out of ReelSteady. If you wish to output your video in 4K, you might capture it in 4.6K or 5K. You’ll have some leeway for ReelSteady to work its magic.

ReelSteady’s sole flaw is its high price ($399). ReelSteady is not available in After Effects, unlike some of the other choices on this list. ReelSteady, on the other hand, is the way to go if you would like the smoothest footage imaginable.

Conclusion

Shaky video footage would be the last thing any video creator wants unless it’s done intentionally for artistic or creative reasons. As a result, they employ methods and equipment to keep the camera safe from any undesired movement.

However, occasionally those tools aren’t available, and the outcome is questionable. That is why we decided to compile this article to add to the knowledge of our readers how they can use After Effects to stabilize videos to enhance their video content!

Try It Free Try It Free

Part 1: Stabilize Video with Built-in Warp Stabilizer in AE

Step 3: Once you apply the warp stabilizer, it will start immediately. So now, all you have to do is lay back and let the stabilizer do its job.

Part 2: Stabilize Shaky Video with Track Motion Feature in AE

Using Stabilize Motion feature to stabilize video is an old-school heritage function from the era of the Creative Suite, it will still be there in After Effects presently and performs admirably.

Step 2: Select Stabilize Motion from the drop-down menu whenever the tracker panel is open. You’ll see that a tracker box appears in your Layer Panel once you’ve done this.

(Note: You’ll need to identify a proper location in your film for the tracker to operate at this stage. We’re monitoring a vehicle using a camera operator’s drone in the instance below).

Step 3: Let’s press the Play button on the tracker panel once we’ve set up the tracker box. The tracker box should adhere to the location or item you chose when you do this.

(Note: When your tracking points start to go astray, use the Pause button, personally modify the tracking point, and then push play to resume the journey).

(Note A dialogue window with choices for applying them. Usually, you’ll want to choose X and Y here).

Part 3: Using Stabilization Plugins for Smoother Video in AE

However, as with any good program, third-party plugins could only help you take your work to the next level by adding new features or streamlining your process.

It should be unsurprising that After Effects has many plugins for a program that is over 30 years old. Here are the best stabilization plugins for smoother video in AE:

1. Orb

For example, how can the line between night and day be altered in a model of a populated planet such that cities may be visible at night but not during the day?

2. Depth of Field Generator PRO (DOF PRO)

Capability for chromatic and achromatic aberration, focal plane bokeh distinction, astigmatism and vignetting effects, bespoke aperture maps, and noise recovery are among the advanced features.

3. ReelSteady

Conclusion

Try It Free Try It Free

Part 1: Stabilize Video with Built-in Warp Stabilizer in AE

Step 3: Once you apply the warp stabilizer, it will start immediately. So now, all you have to do is lay back and let the stabilizer do its job.

Part 2: Stabilize Shaky Video with Track Motion Feature in AE

Using Stabilize Motion feature to stabilize video is an old-school heritage function from the era of the Creative Suite, it will still be there in After Effects presently and performs admirably.

Step 2: Select Stabilize Motion from the drop-down menu whenever the tracker panel is open. You’ll see that a tracker box appears in your Layer Panel once you’ve done this.

(Note: You’ll need to identify a proper location in your film for the tracker to operate at this stage. We’re monitoring a vehicle using a camera operator’s drone in the instance below).

Step 3: Let’s press the Play button on the tracker panel once we’ve set up the tracker box. The tracker box should adhere to the location or item you chose when you do this.

(Note: When your tracking points start to go astray, use the Pause button, personally modify the tracking point, and then push play to resume the journey).

(Note A dialogue window with choices for applying them. Usually, you’ll want to choose X and Y here).

Part 3: Using Stabilization Plugins for Smoother Video in AE

However, as with any good program, third-party plugins could only help you take your work to the next level by adding new features or streamlining your process.

It should be unsurprising that After Effects has many plugins for a program that is over 30 years old. Here are the best stabilization plugins for smoother video in AE:

1. Orb

For example, how can the line between night and day be altered in a model of a populated planet such that cities may be visible at night but not during the day?

2. Depth of Field Generator PRO (DOF PRO)

Capability for chromatic and achromatic aberration, focal plane bokeh distinction, astigmatism and vignetting effects, bespoke aperture maps, and noise recovery are among the advanced features.

3. ReelSteady

Conclusion

Try It Free Try It Free

Part 1: Stabilize Video with Built-in Warp Stabilizer in AE

Step 3: Once you apply the warp stabilizer, it will start immediately. So now, all you have to do is lay back and let the stabilizer do its job.

Part 2: Stabilize Shaky Video with Track Motion Feature in AE

Using Stabilize Motion feature to stabilize video is an old-school heritage function from the era of the Creative Suite, it will still be there in After Effects presently and performs admirably.

Step 2: Select Stabilize Motion from the drop-down menu whenever the tracker panel is open. You’ll see that a tracker box appears in your Layer Panel once you’ve done this.

(Note: You’ll need to identify a proper location in your film for the tracker to operate at this stage. We’re monitoring a vehicle using a camera operator’s drone in the instance below).

Step 3: Let’s press the Play button on the tracker panel once we’ve set up the tracker box. The tracker box should adhere to the location or item you chose when you do this.

(Note: When your tracking points start to go astray, use the Pause button, personally modify the tracking point, and then push play to resume the journey).

(Note A dialogue window with choices for applying them. Usually, you’ll want to choose X and Y here).

Part 3: Using Stabilization Plugins for Smoother Video in AE

However, as with any good program, third-party plugins could only help you take your work to the next level by adding new features or streamlining your process.

It should be unsurprising that After Effects has many plugins for a program that is over 30 years old. Here are the best stabilization plugins for smoother video in AE:

1. Orb

For example, how can the line between night and day be altered in a model of a populated planet such that cities may be visible at night but not during the day?

2. Depth of Field Generator PRO (DOF PRO)

Capability for chromatic and achromatic aberration, focal plane bokeh distinction, astigmatism and vignetting effects, bespoke aperture maps, and noise recovery are among the advanced features.

3. ReelSteady

Conclusion

Toon Up Your Photos: Top Mobile Apps for Cartoon-Style Editing

Top Best 16 Apps to Cartoon Yourself with Ease [iPhone & Android]

Liza Brown

Apr 23, 2024• Proven solutions

Posting your photos or videos on various digital platforms to communicate with your audience helps you increase your followership. Instead of sharing simple photos with different filters, you can do some creative things with them, like introducing cartoon effects.

Nowadays, many mobile applications are available in the market that help you turn yourself into a cartoon. This guide presents top-rated apps for you to convert a photo to cartoon for free.

If you are looking for how to turn a picture into a cartoon, make sure you don’t miss this read. Let’s get into further specifics.

Part 2. Top 5 iOS Apps to Turn Yourself Into a Cartoon
Part 3. Want to Cartoon Yourself on a Computer? Try Filmora!
Conclusion

Part 1. 5 Best Android Applications to Cartoon Yourself

Try using the Android apps below to convert your pictures into cartoons effortlessly.

1.MomentCam

This app comes with a wide selection of emoticons and cartoons to make your experience memorable. Along with elegantly converting your pictures into cartoons, this app also gives rewards to the most creative users.

All you need is to upload the photo you want to cartoon and select the suitable background. Once done, leave the rest on MomentCam. It allows you to choose beard styles, glass, hairstyles, and much more.

Pros

It offers a wide range of cartoon effects to make your photos creative.
This app has an active community where you can share your pictures and win prizes.

Cons

Some users have reported loading issues.
Every photo you create with the free version comes with a watermark.

2. Cartoon Photo Editor

This application is specifically designed to convert your photos to cartoons. A single click can help you get this job done quickly. It comes with a selfie mode that makes photo editing an easy task for you. The high processing speed of the Cartoon Photo Editor assists you in cartooning yourself within seconds.

Pros

You can find a range of cartoon animation features incorporated into this Android application.
It enables you to create a cartoon photo with the selfie camera.

Cons

The display of too many advertisements may be awkward for users.

3.Painnt

It is listed among the few leading Android apps that help you turn yourself into a cartoon. Whether you want to adjust the brightness, saturation, transparency, or other parameters of your images, Painnt will become your go-to photo editor. Plus, this app features a creative community where you can find like-minded people and artwork of other users.

Pros

It holds more than 1000 filters and cartoon effects.
You can customize cartoon filters by adjusting various parameters, like brightness and more.
This app launches regular updates to offer more effects and filters.

Cons

Some users have reported bugs in the desktop version of this application.

4. Prisma Photo Editor

You must have heard this name, as it was the most popular photo-editing app on the market a few years back. Though Prisma is not as popular as it was in the past, it still features some amazing filters and cartoon effects. It is known for giving your photo a cartoonish look as if it is designed by seasoned photo artists.

The best thing about this application is that it introduces new filters and effects regularly to ensure you have enough ideas to create your cartoon photo. With this app, you can save your photos in both HD and SD quality.

Pros

It offers over 300 filters to turn your photos to cartoons.
This app releases new cartoon effects every other day.

Cons

It crashes sometimes on Android and iPhone devices.

5.Cartoon Yourself

With this photo-editing application, you can turn yourself into a cartoon very easily. Though it does not allow you to take pictures, it makes it super easy for you to create cartoon photos from your existing images.

Choose the desired picture by hitting the “Add a Photo” button and click on the “Apply Effect” button. Doing this will help you explore a rich collection of cartoon effects and stickers within the app. Once your cartoon photo is created, this app allows you to share it on various social media platforms.

It also comes with basic photo editing features, including but not limited to rotating, mirroring, or cropping pictures.

Pros

The user interface is super simple for every user, including beginners.
It helps you introduce unmatchable cartoon effects to your photos.

Cons

The free version carries limited effects and filters.

Part 2. Top 5 iOS Apps to Turn Yourself Into a Cartoon

Do you use iPhone devices? Looking for apps to create your cartoon photos? Try any of the applications listed below.

1.Clip2Comic; Caricature Maker

This application enables you to use existing photos to create their cartoon versions. At the same time, it also allows you to use the phone’s camera, take a picture, and convert it into a cartoon. With the live preview feature, you can see how pictures will look like once you record or capture them.

Clip2Comic offers eight art filters, sketch, toon, and comics. The photo editing tools help you enhance your photos or crop them as and when needed. On the other hand, deformation tools enable you to make caricatures.

Pros

You can export high quality images up to 1080p.
It allows you to choose from a wide variety of sketches, posters, and other cartoon effects.

Cons

In-app purchases and ads may be irritating for some users.

2.Moments Cartoon Caricature

The caricature tools of this mobile application helps you turn your ordinary pictures into hilarious photos. In addition, this app enables you to participate in different selfie contests. With this app, you can access both the front and back cameras of your mobile device to capture as many pictures as you want.

A rich collection of features to convert your photos into cartoons makes the Moments Cartoon Caricature app stand out in the market. It also allows you to make black and white caricatures. If you need an easy-to-use app to create stunning photos for social media platforms, don’t forget to give Moments Cartoon Caricature a try.

Pros

It offers a one-click feature to apply cartoon effects to your images.
You can participate in various selfie contests through this application.
It enables you to take photos and convert them into cartoons effortlessly.

Cons

Sometimes, you may find loading issues.

3.Cartoon Sketch Camera Pro

This photo editor features a huge collection of effects to cartoon your photos, including but not limited to Dots, Crosshatch, Swirl, Sketch, Emboss, Cartoon, and Halftone. Once you upload your pictures and cartoon them, you have the option to share your creations on all popular social media platforms. It is just a matter of a single click.

Pros

You can choose from a range of cartoon effects and filters.
It enables you to save your creations in the cartoon library.

Cons

Seeing a lot of ads in the free version may be annoying for you and other users.

4.ToonCamera

This photo editor is specifically designed for iPhone users to take pictures and turn them into cartoons within minutes. You can find a broad collection of pencil effects, ink, stipple, and cartoons in this mobile app. The best thing about this application is that it shows you a real-time preview so that you can understand how your cartoon photos will look like.

Moreover, ToonCamera can customize your photos freely to maximize the visual effects. Along with saving your cartoon photos on the camera roll, you can share them too on different social platforms.

Pros

When customizing your photos, you can choose from a diverse collection of high quality filters and effects.
The customer support is highly responsive and cooperative.

Cons

This app does not run on iPhone devices with a version earlier than 8.1.

5.Sketch Me

Using this application makes it easy to create social media hits. You can achieve high standards with different cartoon effects, like Hatching, Cartoon, and Pastel. You can fine-tune each effect and adjust opacity and edge strength. It will help you highlight specific parts of your pictures.

If you are looking forward to enhancing the colors of your cartoon photos, you can play with different parameters, like saturation, brightness, and contrast. With the Sketch Me app, you can share your creations on digital platforms and via email.

Pros

A range of cartoon effects, video effects, and filters are available in this app.
It helps you save the cartoon photos to the Photo Album.

Cons

Some users have claimed that they struggled when importing pictures from the camera roll.

Part 3. Want to Cartoon Yourself on a Computer? Try Filmora

Filmora is a wonderful photo and video editing tool launched by Wondershare. Along with a huge range of features, it offers a cartoon-style feature to convert your photos and videos into a cartoon. All you need is to drag and drop the effect and put it on the desired photo or video.

Using Filmora is a more powerful tool to create cartoon photos than using mobile apps. However, it all depends on the choice of the user. Let’s look at the steps you need to follow to make cartoon photos with Wondershare Filmora.

Step 1:Download Filmora from the official website and open it.

Step 2:Now, drag and drop the photo/video on the timeline.

Step 3:Enter the “Effects” tab and find “Comic Book.”

Step 4:Drag it on the photo/video clip and change the saturation and brightness to give your photo a cartoon style.

Summing It Up

Posting photos or videos on social platforms is a great way to stay connected with your audience. How about introducing some creativity? Well, you can do this by adding cartoon effects, styles, and filters to your pictures. A couple of mobile applications (Android and iOS) are available to perform this task, as listed in the discussion above.

If you want to turn yourself into a cartoon on a computer, don’t forget to try Wondershare Filmora. It is an amazing utility that allows you to make your photos and videos look creative instantly. For more details on how to turn a picture into a cartoon, ensure you read through the complete article.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

CommentSuccessful

Thank you for your comment. We will review it within few days.

Liza Brown

chief Editor

Liza Brown

Apr 23, 2024• Proven solutions

Nowadays, many mobile applications are available in the market that help you turn yourself into a cartoon. This guide presents top-rated apps for you to convert a photo to cartoon for free.

If you are looking for how to turn a picture into a cartoon, make sure you don’t miss this read. Let’s get into further specifics.

Part 2. Top 5 iOS Apps to Turn Yourself Into a Cartoon
Part 3. Want to Cartoon Yourself on a Computer? Try Filmora!
Conclusion

Part 1. 5 Best Android Applications to Cartoon Yourself

Try using the Android apps below to convert your pictures into cartoons effortlessly.

1.MomentCam

Pros

It offers a wide range of cartoon effects to make your photos creative.
This app has an active community where you can share your pictures and win prizes.

Cons

Some users have reported loading issues.
Every photo you create with the free version comes with a watermark.

2. Cartoon Photo Editor

Pros

You can find a range of cartoon animation features incorporated into this Android application.
It enables you to create a cartoon photo with the selfie camera.

Cons

The display of too many advertisements may be awkward for users.

3.Painnt

Pros

It holds more than 1000 filters and cartoon effects.
You can customize cartoon filters by adjusting various parameters, like brightness and more.
This app launches regular updates to offer more effects and filters.

Cons

Some users have reported bugs in the desktop version of this application.

4. Prisma Photo Editor

Pros

It offers over 300 filters to turn your photos to cartoons.
This app releases new cartoon effects every other day.

Cons

It crashes sometimes on Android and iPhone devices.

5.Cartoon Yourself

It also comes with basic photo editing features, including but not limited to rotating, mirroring, or cropping pictures.

Pros

The user interface is super simple for every user, including beginners.
It helps you introduce unmatchable cartoon effects to your photos.

Cons

The free version carries limited effects and filters.

Part 2. Top 5 iOS Apps to Turn Yourself Into a Cartoon

Do you use iPhone devices? Looking for apps to create your cartoon photos? Try any of the applications listed below.

1.Clip2Comic; Caricature Maker

Pros

You can export high quality images up to 1080p.
It allows you to choose from a wide variety of sketches, posters, and other cartoon effects.

Cons

In-app purchases and ads may be irritating for some users.

2.Moments Cartoon Caricature

Pros

It offers a one-click feature to apply cartoon effects to your images.
You can participate in various selfie contests through this application.
It enables you to take photos and convert them into cartoons effortlessly.

Cons

Sometimes, you may find loading issues.

3.Cartoon Sketch Camera Pro

Pros

You can choose from a range of cartoon effects and filters.
It enables you to save your creations in the cartoon library.

Cons

Seeing a lot of ads in the free version may be annoying for you and other users.

4.ToonCamera

Moreover, ToonCamera can customize your photos freely to maximize the visual effects. Along with saving your cartoon photos on the camera roll, you can share them too on different social platforms.

Pros

When customizing your photos, you can choose from a diverse collection of high quality filters and effects.
The customer support is highly responsive and cooperative.

Cons

This app does not run on iPhone devices with a version earlier than 8.1.

5.Sketch Me

Pros

A range of cartoon effects, video effects, and filters are available in this app.
It helps you save the cartoon photos to the Photo Album.

Cons

Some users have claimed that they struggled when importing pictures from the camera roll.

Part 3. Want to Cartoon Yourself on a Computer? Try Filmora

Step 1:Download Filmora from the official website and open it.

Step 2:Now, drag and drop the photo/video on the timeline.

Step 3:Enter the “Effects” tab and find “Comic Book.”

Step 4:Drag it on the photo/video clip and change the saturation and brightness to give your photo a cartoon style.

Summing It Up

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

CommentSuccessful

Thank you for your comment. We will review it within few days.

Liza Brown

chief Editor

How to Edit Audio of a Video on FCP

Benjamin Arango

Mar 27, 2024• Proven solutions

Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.

You May Also Like: How to Edit YouTube Audio >>

Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

How to edit audio on FCP

There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.

Section 1 Clip-level audio editing

While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.

The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.

Related Article: How to fade in/out audio in Final Cut Pro >>

Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.

Section 2: Advanced Audio Editing

The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.

In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.

Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.

The Audio Inspector would allow you to apply the following effects:

The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.

Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.

Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.

Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.

Here’s the video tutorial on how to edit audios in Final Cut Pro:

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

You May Also Like: How to Edit YouTube Audio >>

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

How to edit audio on FCP

There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.

Section 1 Clip-level audio editing

Related Article: How to fade in/out audio in Final Cut Pro >>

Section 2: Advanced Audio Editing

In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.

The Audio Inspector would allow you to apply the following effects:

The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.

Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.

Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.

Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.

Here’s the video tutorial on how to edit audios in Final Cut Pro:

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

You May Also Like: How to Edit YouTube Audio >>

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

How to edit audio on FCP

There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.

Section 1 Clip-level audio editing

Related Article: How to fade in/out audio in Final Cut Pro >>

Section 2: Advanced Audio Editing

In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.

The Audio Inspector would allow you to apply the following effects:

The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.

Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.

Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.

Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.

Here’s the video tutorial on how to edit audios in Final Cut Pro:

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

You May Also Like: How to Edit YouTube Audio >>

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

How to edit audio on FCP

There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.

Section 1 Clip-level audio editing

Related Article: How to fade in/out audio in Final Cut Pro >>

Section 2: Advanced Audio Editing

In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.

The Audio Inspector would allow you to apply the following effects:

The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.

Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.

Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.

Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.

Here’s the video tutorial on how to edit audios in Final Cut Pro:

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Best 16 AVI Trimmers: Cut and Edit AVI Files with Ease [Windows, MAC, Android]

With the growing fame of video-sharing and social media applications like Twitter, Instagram, and TikTok, the demand for simple and fast video cutting and trimming tools has dramatically increased. Nowadays, you don’t have to play with complex video editing tools to produce high-quality videos.

Thanks to several user-friendly editing software to make things easy for everybody. However, finding the right programs to trim/cut videos is still challenging, especially in AVI format.

But, guess what? These top 16 AVI video cutters for Windows, MAC, Android, iPhone, and online will make video cutting and trimming fun, especially when you learn to do it using Filmora.

Part 1: Best AVI Video Cutter to Trim/Cut AVI Video on Windows and MAC – Filmora Video Cutter [with steps]

Filmora by Wondershare is a star video editor with outstanding outcomes. Whether you have a MAC or Windows PC, you can download Filmora regardless of your operating system. The program best serves those who intend to make high-quality videos. The software provides editing support for all video formats, including AVI.

Although Filmora is an affordable editor with tons of audio and video editing options, you can still download the software for free and create projects if watermarks don’t bother you. Moreover, you can count this tool’s capabilities in cropping, resizing, and Chroma screen support. But that’s not the only sweet fruit.

In fact, Filmora is equipped with many jaw-dropping features, including preset templates, auto beat sync, split-screen, speed ramping, motion tracking, keyframing, creative transitions, titles, filters, and much more. And the best part is, you can learn and understand Filmora in no time. That’s why the program is loved and supported by all types of users.

So does Filmora helps cut and trim AVI videos? Yes! It does if you follow these steps correctly.

Step 1: Download Filmora Video Editor

First, download Filmora Video Editor by choosing your operating system, as seen in the screenshot below.

Run the setup and let it finish without any pause or break.

Step 2: Import Your Video to Filmora Video Editor

Importing your AVI video is a very simple process. Just click on the “Film Clip” icon.

It will open a new window screen on your computer to select the video from the directory. Find the clip you want to import and cut. Use your mouse to select it and click the “Open” button.

The video will be loaded in the “Media” folder of Filmora. The clip’s thumbnail should be visible to assure you have done everything correctly.

If you can see that, let’s go to the next step.

Step 3: Drag and Drop Video to Filmora’s Timeline

Select the video in the media folder by clicking over it once. Now, without leaving the hold of the left button of your mouse, slide the video down to the track in the timeline.

After that, a message will pop up, asking about your preference for the project settings. It is recommended to choose the “Match to Media” option unless you’re an experienced video editor who knows how to play with the resolution and frame rates.

You will see the video on the timeline with its preview on the “Preview Screen” on the right side of the interface.

Step 4: Cutting Your Video in Filmora

Here comes the core step you have been waiting for. But before you go any further, you need to know about the “Playhead.”

Playhead is an orange-reddish marker you can find on the timeline.

It has an important role in cutting your videos.

So, move the playhead to your desired frame and click on the “scissor” icon to make the “starting” cut.

As soon as you do it, you will see that the single clip is now divided into two parts similar to this image.

The “Red” marked area in the above screenshot ensures a gap between the clips on the timeline. The “Yellow” arrows confirm two separate clips of the same video.

Place the two clips together as seen in this “Green” area.

And place the playhead anywhere on the clip. And click on the “scissor” icon once again to make the “ending” cut (second cut).

If done correctly, there should be three clips now of the same video, as you can observe in this screenshot.

Again, the “Red” area in the above photo indicates the gap, and the “Yellow” area ensures a third segment of the video.

Note: The gaps you can see in the divided clips are made intentionally for understanding. Practically, Filmora doesn’t move the clip or make gaps in between after you have made the cuts.

Keep in mind that there are three clips on the timeline. Now, if you want to remove the second clip from the video, you need to select that portion first by clicking on it.

Then, right-click on the mouse and choose “Cut” from the menu.

Within a semi-second, the selected portion will be removed from the timeline. And you will be able to see the remaining parts of the video. Now, pull the second clip using your mouse and place it at the end of the first clip without leaving a gap in between.

Then, click the “Play” button under the preview screen to see the results.

You can see in the above two screenshots that there’s a jump between the scenes due to cuts, confirming that video has been cut significantly.

Step 5: Trimming Your Video in Filmora

Remember that cutting and trimming in Filmora are two different things. Trimming allows you to remove a particular video part from visibility without deleting the portion.

So feel free to skip this step if you’re happy learning the cutting technique. But if you’re interested in trimming, here’s how you do it.

Take your mouse cursor at the beginning or end of the clip you want to trim. Keep holding the clip’s corner and slide the mouse back or front to trim the part

Note: Since the trim tool doesn’t delete the video, the final project based on trimming will be of a larger size. Therefore, it is advised to cut videos rather than trimming for fast rendering, better results, and small video size.

Step 6: Save Project and Export Your Cut/Trimmed AVI Video

Choose “Save Project” from the “File” menu.

Select the directory to save the project, rename the new video, and click the “Save” button.

Click on the “Export” button to save the video in AVI or any other video format of your choice on your computer.

Part 2: Top 3 Free AVI Video Cutter on Windows

As a Windows user, finding an excellent video cutter is relatively easy. However, not all software permits importing AVI videos. In the same way, some video trimmers come at a price. So if you really don’t want to pay and enjoy cutting your AVI files, try using these three video cutting tools.

Microsoft Photos (Windows 10)

Microsoft Photos or Photo App is a free photo viewer and editor with your Windows 10. It offers incredible photo editing and enhancement along with different tools for organizing and editing videos in a very friendly way. Likewise, you can create drawings over the videos and add 3D effects and background music to your clips.

You can also trim AVI videos with Microsoft Photos quickly. All you need to do is open your clip with the Photo App, choose the “Trim” option, select a portion of the video you want to trim, and go ahead.

That’s it!

Features

Quick video trimming
Cool text effects
3D library and effects
It has a clear interface
You can find and tag people’s faces
The program has 15+ filters for editing
Motion tracking option for drawing on videos
Allows you to view and organize your files easily

Pros

Microsoft Photos is free for Windows users
It automatically creates albums
The program has a touch-friendly interface
You can integrate your OneDrive with the software

Cons

Lacks before and after view
Not included in older Windows versions
It doesn’t support selective focus or panorama stitching

Handbrake

Handbrake is best-known for its video transcoding traits. Unlike typical video editors, this open-source tool includes limited options to rip Blu-rays and DVDs. Moreover, you can mix the 5.1 soundtracks and convert them to stereo to make the audio compatible with your TV speakers.

But the exciting thing about Handbrake is that you can use this software on your macOS 10.13 or later versions to cut AVI videos for free. However, it’s a bit technical process, as there’s no timeline to help you trim or make cuts on the clips directly with the help of your mouse.

You are required to mention a time range (seconds, minutes, or hours) to keep a specific part of the video while the software removes the non-ranged parts of the clip. For instance, you have a video of 10 seconds. You start the range from 5 seconds and end it at 10 seconds. So, the first four seconds of the video will be cut from the entire clip.

Features

Video cutting, cropping, and resizing
Low-quality and old video restoration
Video conversion from any format to MKV or MP4

Pros

Handbrake is free
You can convert batch videos with ease
It supports MAC, Windows, and Linux OS
Allows you to import video files in all major formats
The software comes with various video conversion presets

Cons

Handbrake is not a user-friendly tool
The video file output is limited to two formats (MKV and MP4) only

Gihosoft Video Cutter

Gihosoft is a clean, free, lossless video cutter on your Windows PC. It’s a simple tool that helps you cut video files into various output formats. So be it AVI, MPEG, or any other file, with Gihosoft, everything becomes handy.

Another fascinating fact about this software is that it allows you to cut videos in three simple steps without losing the quality. So right after installing the program, you simply need to import your file, choose the start and end time, and click the “Cut” button to remove the part of the video.

Features

Fast video and audio cutting
Easy drag and drop audio/video files
It supports most audio and video formats

Pros

Free for both Windows and MAC operating systems
The cutter saves video in original quality

Cons

It does not include basic video editing features

Part 3: Top 3 Free AVI Video Cutter on MAC

Are you looking for a great AVI video cutter for your MAC? Sadly, you have limited product choices as compared to Windows users. But to ensure you don’t waste time looking for a suitable tool, here’s a list of three AVI video cutting programs you can use on your Macintosh.

iMovie

The first and foremost recommended software for free video cutting on MAC is Apple’s own tool, iMovie . It is a built-in program that comes with your system, so there is no need to spend extra on a video editor. iMovie allows you to browse and import most video files, including AVI, right from your computer. Also, this tool is equipped with multiple functions, such as audio editing, video quality enhancement, and much more.

This MAC’s video editor is ideal for beginners. Many home users and small business owners find this tool extremely simple, as they don’t like to be confused with complex features. So, if you want to make cuts to your video clips, start working on iMovie. And within a few clicks, you can trim or cut your videos for free.

Features

Video cutting and trimming
Cropping and rotation
Effects and transitions
Built-in themes
HD and 4K video support
Movie sharing
Audio adjustments
Chroma screen controls
Character tracking

Pros

Free to use for MAC users
Clean timeline
One-click video cutting and trimming
Easy-to-remember keyboard shortcuts
Direct share projects to your social media, like YouTube

Cons

It takes a lot of time to export videos
iMovie needs high HDD storage space

VideoPad by NCH

VideoPad by NCH is a beginner-level video editor with all the basic features. The software is specifically designed for home movie makers. That is why VideoPad is easy to understand and use.

VideoPad is entirely free of cost for non-commercial purposes, but it has limited features. On the other hand, if you want to enjoy full traits, you can purchase the tool.

VideoPad supports video files, including AVI, WMV, MPEG, MOV, MP4, ASF, and XviD. Likewise, you can also burn movies to Blu-ray, DVD, HD-DVD, or CD. And most importantly, you can easily cut or trim AVI videos on your MAC, as the software is available on both MAC and Windows systems.

Features

Audio tools
Video rotation
Video sharing
Visual effects
Video transitions
3D Video editing
Color correction
Overlays and texts
Video optimization
Great plugin support
Direct video uploading
Multiple video resolutions
Video cutting and trimming
Files exportation to various devices
Stereoscopic conversion from 2D to 3D

Pros

You can use the basic tools for free
Allows 360-degree video production
It supports a wide range of video formats
Compatible with MAC and Windows computers

Cons

The auto speech feature performs poorly
The free version has annoying notifications

Xilisoft Video Cutter

Xilisoft Video Cutter is the simplest tool to cut videos on MAC. This software has a straightforward option to cut the clip after importing it to the timeline. The program is fast and has a user-friendly interface.

Moreover, you can polish your videos by merging multiple clips or increasing the video quality once you’re done with the cutting process. At the same time, this video cutter allows you to import all video formats, including XviD, DivX, MOV, FLV, MP4, MPEG-4/, MKV, MPEG, WMV, and AVI.

Features

Video joining
Support multiple output video formats, including HD

Pros

Easy video cutting and merging
It doesn’t require a large storage space
Extremely uncomplicated interface
Real-time preview to make better cuts
Available on both MAC and Windows systems

Cons

The trial version is free to use but limits you from enjoying extra features

Part 4: Top 3 Free AVI Video Cutter on Android

After capturing nice videos with your Android mobile phone, you may need to cut unnecessary scenes to make your clips look professional. While there are numerous Android cutters, not all support the AVI format. So below, you will find the 3 best AVI video cutters for Android, which are free to use.

Quick – Video Editor & Maker

Quick – Video Editor & Maker is a free video editor with PRO results. Many photographers and vloggers love using this app to cut clips immediately. Furthermore, the application offers a wide range of options to assure you don’t have to look to any other tool to rotate or compress video. Quick – Video Editor & Maker lets you import videos in all major formats, including AVI, MPEG, WMA, and more.

Features

Video cutting, fading, and rotation
Speed control tools
Conversion from video to GIF

Pros

Free app
Simple interface

Cons

Lack of updates
Some users complain about app crash

Funimate Video Editor & Maker

If you want to make some professional-grade video edits quickly, you are welcome to download and use Funimate Video Editor & Maker on your Android device. It’s a free tool to cut videos. It has an easy procedure, and you can cut AVI videos in a few seconds.

Plus, you can use the app to add custom animations, effects, and many other exciting elements. You can share your makes on social media like TikTok, Instagram, and other platforms. Contrarily, the app itself is a community with millions of Funimate-users who share their creations daily. You can also join or watch videos from other creators to learn more about new techniques and trends in video editing.

Features

Video trimming and splitting
Animation and cropping
Filters and AI effects
Speed adjustment
Keyframing and video merging

Pros

Free Android application with several editing tools
Easy trimming, splitting, and cropping
Aspect ratio, border, and color customization
Direct social media sharing

Cons

Free users cannot use templates
The free version stamps watermarks on each project

Part 5: Top 3 Free AVI Video Cutter on iPhone

No wonder iPhone’s camera captures high-quality videos. But the problem begins when there’s no free app to cut AVI videos. So if you’re recording great spots, but deep inside, you really want to remove some parts, then these 3 free AVI video cutters will work smoothly on your iPhone.

Cut, Trim, Split Video Editor

Download Cut, Trim, Split Video Editor on your iPhone to delete/cut unwanted portions of your video clips. The tool is also best for trimming iPhone-recorded clips without messing with the frames. Or, if you just want to split the video into multiple parts for your next WhatsApp status, this iPhone app can do that job for you.

The app supports multiple video file types, including MOV, MP4, AVI, MPEG, MPEG-2, and 3GPP

Features

Easy trimming and cutting video clips
Splitting big-sized videos into two smaller clips
Import video from file-sharing platforms, like iCloud, using Wi-Fi

Pros

Free app for fast video cutting and sharing
Simple UI interface

Cons

The free version shows advertisements

Splice - Video Editor & Maker

Splice is an extraordinary video editor that makes it easy to make fully customized and professional videos from your iPhone. The app is also best for video cutting. Besides, it has many interesting features, which you can use from your device.

Features

Cutting, trimming, and cropping your videos
Exposure, saturation, and exposure adjustment
Slow and fast motion with speed ramping option
Video masking and overlay
Color correction and text overlays

Pros

Free basic features, such as video cutting
iTunes integration
Supports AVI video input
User-friendly application
Access to the music library
Quick and simple social sharing

Cons

Output videos require high mobile storage space

Part 6: Top 3 Free AVI Video Cutter Online

Don’t want to install video cutters on your MAC, Windows, smartphone, or any other device? No problem! You can use online video cutters and trimmers to split, cut, or trim your clips for free.

However, the problem still exists in online tools, as not all web-based editors allow importing AVI files. So to save your time and energy, you can directly go to the following online AVI cutters to complete your tasks.

Kapwing

Kapwing is an online video editor best for casual creatives, such as Vloggers and YouTubers. You can use this web-based platform to cut your videos. Gladly, Kapwing supports all AVI incomings. You can upload your AVI video files to this platform and use its trim or split feature. To do that, you need to upload your AVI video and choose the “Trim” or “Split” tool to see the magic. Once done with the trimming process, you can explore Kapwing’s other incredible traits and apply them to your project.

Features

Video splitting, trimming, and merging
Audio capturing
Speed adjustment
Image and video library
Text editing and overlay
Auto-generated subtitles
Several collaboration tools
Video creation from scratch
Templates, shapes, and emojis
Simple drag-and-drop interface
Video transitions, plugins, and elements

Pros

Free online video trimmer
User-friendly interface
You can export 30-minutes long projects
Allows you to export unlimited videos with a watermark
One watermark-free video export is available each month

Cons

Cannot export long videos with a free account
Only 10 minutes transcription limit is available for free users
You need to purchase a monthly or annual subscription to remove the watermark from multiple videos

Clideo

Clideo is not just a video cutter but an online solution to all your video editing problems. The tool is super popular, with 4 million+ users a month. And why not? This is one of those web-based platforms that allow AVI video files to be imported and exported without converting them into any other formats.

Nevertheless, if you’re only looking for video cutting options, this tool makes your life easy. Simply upload your video, and select the portion of it by setting start and end times. Choose whether you want to delete or extract the selected part from the clip, and hit the “Export” button.

And within a few moments, you can enjoy a trimmed video clip. And if you plan to be more creative, you can look for other Clideo features to make videos more fascinating.

Features

Video combining and cutting
Resize and crop clips
Compress your videos
Add text and subtitles
Add music to your video files
Filters and color correction tools
Audio mute, cutting, and muting
Video rotation, flipping, and speed adjustment

Pros

Basic tools can be used for free
Best for beginners and intermediate users
Ideal for AVI videos and also supports other video formats

Cons

You cannot use the free version regularly

Aspose

Aspose is a free web-based application to cut clips. You can use this tool on any operating system. It supports all major video file formats, including AVI, MKV, MOV, MP4, FLV, WMV, WEBM, and GIF. Additionally, you can use Aspose for various other reasons, such as audio extraction, video resizing, and more.

Features

Video cutting and compressing
Looping, rotation, and video merging
Adding watermarks on videos
Sound muting
Speed change and audio addition

Pros

Aspose is a free online tool
It offers straightforward options to cut and edit videos

Cons

No color correction option
Slow video cutting process
Lacks timeline and other valuable features

Part 7: Bottom Line

Tired of finding AVI cutters? Relax and try these top 16 AVI video cutters for Windows, MAC, iPhone, Android, and online. Almost all these tools are free to use and are extremely handy. On the other hand, if you want to cut and trim videos professionally, download Filmora and follow the step-by-step guide in this article for making clean cuts.

Part 8: FAQs

Q1. How do I trim an AVI video?

To trim an AVI video file, ensure that the software or tool you use supports AVI input. Generally, you need to upload or import a clip on the program, select the portion of the video, and apply the cut/trim feature to make it happen.

Q2. Which is the best online video cutter?

Kapwing and Clideo are the two best online video cutters you can use for free. Both web-based tools also allow you to cut your AVI videos.

Q3. Which is the best video cutter and joiner software?

Filmora, iMovie, and Kapwing are some of the best video cutters and joiner tools. These video editors are also free to use and come with different features.

Q4. How do I trim an AVI file in Windows 10?

Trimming an AVI video file in Windows 10 is very simple. Launch the Microsoft Photos (Photo App) application on your computer, add clip, and select the “Trim” tool to trim a specific video part.

Q5. How can I cut a video on my computer for free?

MAC and Windows users can download Filmora to cut videos for free. Filmora also offers a wide range of other features to make your clips exciting. Contrarily, Windows users can use the built-in Photo App in Windows 10 or download Gihosoft or Handbrake software to cut clips. Likewise, MAC users can download VideoPad, Xilisoft Video Cutter, or iMovie for free.