:max_bytes(150000):strip_icc():format(webp)/football-referee-signaling-touchdown-in-stadium-599944339-5a84cb9e875db900367df025.jpg)
New In 2024, Unleashing the Power of Color in Final Cut Pro
Unleashing the Power of Color in Final Cut Pro
Color Correction in Final Cut Pro
Benjamin Arango
Mar 27, 2024• Proven solutions
Most of the advanced camera units these days are capable enough to produce shots with rich quality automatically but still some professionals need to edit captured videos for little color correction. The major reasons behind this additional color correction are:
- Some people need to correct their mistakes on captured videos; it can be due to an incorrect balance of white and due to under or over-exposure at some points.
- Customize different video clips by matching them so that they appear in sequence even if they are captured at different moments.
- For creating a specific style or look in order to support your mood; for example, one may need to make scenes appear cold, dark, cheery, warm, bright or foreboding.
No matter what you want to do for the customization of your videos, Final Cut Pro can provide your complete assistance. The details below can help you to collect complete information about color correction techniques.
The steps below can help all beginners to develop easy video edited projects using Final Cut Pro, but if some of you find this platform a little difficult then it is good to start practicing as a beginner on Wondershare Filmora for Mac . This is a well-known video editor tool for Mac users that contains all powerful features and an interactive user interface to facilitate all beginners.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Related article:
Methods to Correct Color in Final Cut Pro
Those who wish to use FCP for color signal editing need to follow these steps:
Step 1
First you need to open Color Board on FCP as there is an automatic color correction tool available inside. The Video Board can be opened by using three different ways:
- You can select audio enhancement and color correction options available below the viewer and then hit “Show Color Board”. It can be simply done by pressing CMD + 6.
- On effect browser you can easily access color correction effects inside the color category; that is also easier to allocate.
- Choose Window and then click on Go To, you will find Color Board on the appeared drop-down menu.
- All the color correction effects will start appearing in the effects section available on the video inspector.
Step 2
As soon as you start working on Color Board, it is good to open Video Scopes on your system. For this you need to click on a small icon of light switch available at the top right corner of the viewer and then select Show Video Scopes from drop-down menu. It can be also done by simply pressing Command+7.
As soon as you make this selection, the video scopes window will automatically appear on the next viewer. Here users can easily obtain information related to the current video frame, and they can be easily configured as per need. Go to the settings option available on the top right side of the window and then hit the Waveform option.
Step 3
Now it is time to work on color correction directly. There are three types of color corrections that users need to work upon: Hue, Saturation, and Exposure. Here is some brief information about all of these:
Exposure or Brightness: On the Color board window you can easily make adjustments for brightness levels of video clips. As you move on to different portions of the image ranging between dark and white parts, the scope will keep on displaying waveforms with values between 0 and 100 representing darkness and brightness respectively. The master slider available on screen helps users to make overall adjustments for brightness by using three control options: highlights for white circles, midtones for gray scale and shadows for black parts. Consider waveform values as a guide for adjustment and move controls up and down to adjust contrast as per need.
Saturation: It refers to the richness of colors in an image. Simply select saturation pane from the color board and on the video scopes window you can use the settings menu directly to adjust saturation information for every pixel. The image pixels that are far away from the center of vectorscope circle means they are more saturated as compared to pixels that are little bit closure.
Hue: Hue displays the actual color values in images or frames in terms of primary colors: red, blue, and yellow. Use color pane from color board to adjust hue that is displayed in the form of a rainbow on screen. It is possible to manipulate values for highlights, midtones and shadows individually as per need. Using the histogram option available on settings menu can help you to make direct adjustments for all these components.
Step 4
It is possible to preview all the corrections on the original image before making them final. Simple hit the arrow with left-facing formation in the top left corner of the Color Board and then return to the video inspector. Hit on the Blue box to switch between correction On and Off options.
Here’s the video tutorial on how to correct color in Final Cut Pro:
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Most of the advanced camera units these days are capable enough to produce shots with rich quality automatically but still some professionals need to edit captured videos for little color correction. The major reasons behind this additional color correction are:
- Some people need to correct their mistakes on captured videos; it can be due to an incorrect balance of white and due to under or over-exposure at some points.
- Customize different video clips by matching them so that they appear in sequence even if they are captured at different moments.
- For creating a specific style or look in order to support your mood; for example, one may need to make scenes appear cold, dark, cheery, warm, bright or foreboding.
No matter what you want to do for the customization of your videos, Final Cut Pro can provide your complete assistance. The details below can help you to collect complete information about color correction techniques.
The steps below can help all beginners to develop easy video edited projects using Final Cut Pro, but if some of you find this platform a little difficult then it is good to start practicing as a beginner on Wondershare Filmora for Mac . This is a well-known video editor tool for Mac users that contains all powerful features and an interactive user interface to facilitate all beginners.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Related article:
Methods to Correct Color in Final Cut Pro
Those who wish to use FCP for color signal editing need to follow these steps:
Step 1
First you need to open Color Board on FCP as there is an automatic color correction tool available inside. The Video Board can be opened by using three different ways:
- You can select audio enhancement and color correction options available below the viewer and then hit “Show Color Board”. It can be simply done by pressing CMD + 6.
- On effect browser you can easily access color correction effects inside the color category; that is also easier to allocate.
- Choose Window and then click on Go To, you will find Color Board on the appeared drop-down menu.
- All the color correction effects will start appearing in the effects section available on the video inspector.
Step 2
As soon as you start working on Color Board, it is good to open Video Scopes on your system. For this you need to click on a small icon of light switch available at the top right corner of the viewer and then select Show Video Scopes from drop-down menu. It can be also done by simply pressing Command+7.
As soon as you make this selection, the video scopes window will automatically appear on the next viewer. Here users can easily obtain information related to the current video frame, and they can be easily configured as per need. Go to the settings option available on the top right side of the window and then hit the Waveform option.
Step 3
Now it is time to work on color correction directly. There are three types of color corrections that users need to work upon: Hue, Saturation, and Exposure. Here is some brief information about all of these:
Exposure or Brightness: On the Color board window you can easily make adjustments for brightness levels of video clips. As you move on to different portions of the image ranging between dark and white parts, the scope will keep on displaying waveforms with values between 0 and 100 representing darkness and brightness respectively. The master slider available on screen helps users to make overall adjustments for brightness by using three control options: highlights for white circles, midtones for gray scale and shadows for black parts. Consider waveform values as a guide for adjustment and move controls up and down to adjust contrast as per need.
Saturation: It refers to the richness of colors in an image. Simply select saturation pane from the color board and on the video scopes window you can use the settings menu directly to adjust saturation information for every pixel. The image pixels that are far away from the center of vectorscope circle means they are more saturated as compared to pixels that are little bit closure.
Hue: Hue displays the actual color values in images or frames in terms of primary colors: red, blue, and yellow. Use color pane from color board to adjust hue that is displayed in the form of a rainbow on screen. It is possible to manipulate values for highlights, midtones and shadows individually as per need. Using the histogram option available on settings menu can help you to make direct adjustments for all these components.
Step 4
It is possible to preview all the corrections on the original image before making them final. Simple hit the arrow with left-facing formation in the top left corner of the Color Board and then return to the video inspector. Hit on the Blue box to switch between correction On and Off options.
Here’s the video tutorial on how to correct color in Final Cut Pro:
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Most of the advanced camera units these days are capable enough to produce shots with rich quality automatically but still some professionals need to edit captured videos for little color correction. The major reasons behind this additional color correction are:
- Some people need to correct their mistakes on captured videos; it can be due to an incorrect balance of white and due to under or over-exposure at some points.
- Customize different video clips by matching them so that they appear in sequence even if they are captured at different moments.
- For creating a specific style or look in order to support your mood; for example, one may need to make scenes appear cold, dark, cheery, warm, bright or foreboding.
No matter what you want to do for the customization of your videos, Final Cut Pro can provide your complete assistance. The details below can help you to collect complete information about color correction techniques.
The steps below can help all beginners to develop easy video edited projects using Final Cut Pro, but if some of you find this platform a little difficult then it is good to start practicing as a beginner on Wondershare Filmora for Mac . This is a well-known video editor tool for Mac users that contains all powerful features and an interactive user interface to facilitate all beginners.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Related article:
Methods to Correct Color in Final Cut Pro
Those who wish to use FCP for color signal editing need to follow these steps:
Step 1
First you need to open Color Board on FCP as there is an automatic color correction tool available inside. The Video Board can be opened by using three different ways:
- You can select audio enhancement and color correction options available below the viewer and then hit “Show Color Board”. It can be simply done by pressing CMD + 6.
- On effect browser you can easily access color correction effects inside the color category; that is also easier to allocate.
- Choose Window and then click on Go To, you will find Color Board on the appeared drop-down menu.
- All the color correction effects will start appearing in the effects section available on the video inspector.
Step 2
As soon as you start working on Color Board, it is good to open Video Scopes on your system. For this you need to click on a small icon of light switch available at the top right corner of the viewer and then select Show Video Scopes from drop-down menu. It can be also done by simply pressing Command+7.
As soon as you make this selection, the video scopes window will automatically appear on the next viewer. Here users can easily obtain information related to the current video frame, and they can be easily configured as per need. Go to the settings option available on the top right side of the window and then hit the Waveform option.
Step 3
Now it is time to work on color correction directly. There are three types of color corrections that users need to work upon: Hue, Saturation, and Exposure. Here is some brief information about all of these:
Exposure or Brightness: On the Color board window you can easily make adjustments for brightness levels of video clips. As you move on to different portions of the image ranging between dark and white parts, the scope will keep on displaying waveforms with values between 0 and 100 representing darkness and brightness respectively. The master slider available on screen helps users to make overall adjustments for brightness by using three control options: highlights for white circles, midtones for gray scale and shadows for black parts. Consider waveform values as a guide for adjustment and move controls up and down to adjust contrast as per need.
Saturation: It refers to the richness of colors in an image. Simply select saturation pane from the color board and on the video scopes window you can use the settings menu directly to adjust saturation information for every pixel. The image pixels that are far away from the center of vectorscope circle means they are more saturated as compared to pixels that are little bit closure.
Hue: Hue displays the actual color values in images or frames in terms of primary colors: red, blue, and yellow. Use color pane from color board to adjust hue that is displayed in the form of a rainbow on screen. It is possible to manipulate values for highlights, midtones and shadows individually as per need. Using the histogram option available on settings menu can help you to make direct adjustments for all these components.
Step 4
It is possible to preview all the corrections on the original image before making them final. Simple hit the arrow with left-facing formation in the top left corner of the Color Board and then return to the video inspector. Hit on the Blue box to switch between correction On and Off options.
Here’s the video tutorial on how to correct color in Final Cut Pro:
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Most of the advanced camera units these days are capable enough to produce shots with rich quality automatically but still some professionals need to edit captured videos for little color correction. The major reasons behind this additional color correction are:
- Some people need to correct their mistakes on captured videos; it can be due to an incorrect balance of white and due to under or over-exposure at some points.
- Customize different video clips by matching them so that they appear in sequence even if they are captured at different moments.
- For creating a specific style or look in order to support your mood; for example, one may need to make scenes appear cold, dark, cheery, warm, bright or foreboding.
No matter what you want to do for the customization of your videos, Final Cut Pro can provide your complete assistance. The details below can help you to collect complete information about color correction techniques.
The steps below can help all beginners to develop easy video edited projects using Final Cut Pro, but if some of you find this platform a little difficult then it is good to start practicing as a beginner on Wondershare Filmora for Mac . This is a well-known video editor tool for Mac users that contains all powerful features and an interactive user interface to facilitate all beginners.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Related article:
Methods to Correct Color in Final Cut Pro
Those who wish to use FCP for color signal editing need to follow these steps:
Step 1
First you need to open Color Board on FCP as there is an automatic color correction tool available inside. The Video Board can be opened by using three different ways:
- You can select audio enhancement and color correction options available below the viewer and then hit “Show Color Board”. It can be simply done by pressing CMD + 6.
- On effect browser you can easily access color correction effects inside the color category; that is also easier to allocate.
- Choose Window and then click on Go To, you will find Color Board on the appeared drop-down menu.
- All the color correction effects will start appearing in the effects section available on the video inspector.
Step 2
As soon as you start working on Color Board, it is good to open Video Scopes on your system. For this you need to click on a small icon of light switch available at the top right corner of the viewer and then select Show Video Scopes from drop-down menu. It can be also done by simply pressing Command+7.
As soon as you make this selection, the video scopes window will automatically appear on the next viewer. Here users can easily obtain information related to the current video frame, and they can be easily configured as per need. Go to the settings option available on the top right side of the window and then hit the Waveform option.
Step 3
Now it is time to work on color correction directly. There are three types of color corrections that users need to work upon: Hue, Saturation, and Exposure. Here is some brief information about all of these:
Exposure or Brightness: On the Color board window you can easily make adjustments for brightness levels of video clips. As you move on to different portions of the image ranging between dark and white parts, the scope will keep on displaying waveforms with values between 0 and 100 representing darkness and brightness respectively. The master slider available on screen helps users to make overall adjustments for brightness by using three control options: highlights for white circles, midtones for gray scale and shadows for black parts. Consider waveform values as a guide for adjustment and move controls up and down to adjust contrast as per need.
Saturation: It refers to the richness of colors in an image. Simply select saturation pane from the color board and on the video scopes window you can use the settings menu directly to adjust saturation information for every pixel. The image pixels that are far away from the center of vectorscope circle means they are more saturated as compared to pixels that are little bit closure.
Hue: Hue displays the actual color values in images or frames in terms of primary colors: red, blue, and yellow. Use color pane from color board to adjust hue that is displayed in the form of a rainbow on screen. It is possible to manipulate values for highlights, midtones and shadows individually as per need. Using the histogram option available on settings menu can help you to make direct adjustments for all these components.
Step 4
It is possible to preview all the corrections on the original image before making them final. Simple hit the arrow with left-facing formation in the top left corner of the Color Board and then return to the video inspector. Hit on the Blue box to switch between correction On and Off options.
Here’s the video tutorial on how to correct color in Final Cut Pro:
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
How to Make a Reaction Video Easier Than Ever With Filmora
How to Make a Reaction Video Easier Than Ever With Filmora
Liza Brown
Mar 27, 2024• Proven solutions
With several video-sharing platforms and billions of videos on those platforms, it is very difficult and competitive to make your mark and have an identity. There are hundreds of categories of videos that you can find on the platforms like Youtube, Dailymotion, Vimeo, and more. Among all those categories, reaction videos are one of the most popular categories. It allows a person to review another person’s opinion, view, or idea about any particular issue or instance. Most of the video-sharing platforms enable their users to make all kinds of reaction videos without any restriction. Having such a huge competition makes it hard to stand out and attract viewers.
Have you ever seen videos where the reactor has a transparent background instead of the rectangle box in the corner? They look nice and engaging, right? The process of making such videos will require so many materials such as a green screen, stand, and other materials to support it. It is difficult for everyone to afford all these and secondly, it is very difficult to carry from one place to another.
With Filmora X, you can create such transparent background reaction videos without such expensive material. Filmora has launched a new feature name AI Portrait that uses artificial intelligence to create amazing and cool effects. It uses the latest technology to separate the background and humans in the footage to help you remove the background with a single click. So, let’s get started with the process of making stunning reaction videos with Filmora’s AI Portrait.
You might be interested in:
Step 01: Open Filmora X. If it is not already installed on your PC, you can download it from here and install it on your PC.
Step 02: Import the video that you want to react to and your reaction video. If you have not already recorded your reaction, then record it first using any camera or smartphone.
Step 03: Place both of these videos into the timeline. Make sure to place your reaction above.
Step 04: Select your reaction video on the timeline and go to the “Effects”. Here you will find a new folder named “AI Portrait”, open it. Here you will find multiple AI portrait effects.
Step 05: Our goal is to remove the background of the reaction. To do that, we will use Human Segmentation. Drag and drop Human Segmentation into the reaction video. If you haven’t purchased this effect already, it will ask you to buy it to export the video. But you want to try it first, click on “Try It.”
Step 06: Once the effect is successfully applied to the video, its background will be removed automatically.
Step 07: Adjust the video by making it smaller and place it in the bottom left corner of the screen. Your reaction video is ready to be uploaded on video-sharing platforms.
Step 08: To make your video look cool and stunning, you can also add multiple other effects to your reaction. AI portrait allows you to add a border around the character to make it look more visible and separate it from another video. Go to the AI portrait and drag Human Border Effect and drop it into your reaction. It will create an outline around the character and make it look more visible.
Step 09: In some instances, you might need to change the position or size of your reaction. You can easily do that by applying the Keyframes to it. If you feel like changing the part of your reaction at some point in the video, go to that point in the timeline and click on the keyframe button above the timeline.
Step 10: Once you click on the keyframe, it will add a keyframe to the video. Now move forward into the timeline to a point and adjust your character’s position by dragging it. Let’s move it to the bottom right corner. It will add another keyframe to the video in the timeline. Now the character will change its position from the left corner to the right corner once it reaches that specific point in time.
Conclusion
AI Portrait allows you to create wonderful effects using artificial intelligence. This is one of the best uses of AI to make stunning reaction videos. It will not only save you a lot of time but will also help you save a lot of money by helping you remove the background of your video without expensive materials such as a green screen and other materials related to it.
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Liza Brown
Mar 27, 2024• Proven solutions
With several video-sharing platforms and billions of videos on those platforms, it is very difficult and competitive to make your mark and have an identity. There are hundreds of categories of videos that you can find on the platforms like Youtube, Dailymotion, Vimeo, and more. Among all those categories, reaction videos are one of the most popular categories. It allows a person to review another person’s opinion, view, or idea about any particular issue or instance. Most of the video-sharing platforms enable their users to make all kinds of reaction videos without any restriction. Having such a huge competition makes it hard to stand out and attract viewers.
Have you ever seen videos where the reactor has a transparent background instead of the rectangle box in the corner? They look nice and engaging, right? The process of making such videos will require so many materials such as a green screen, stand, and other materials to support it. It is difficult for everyone to afford all these and secondly, it is very difficult to carry from one place to another.
With Filmora X, you can create such transparent background reaction videos without such expensive material. Filmora has launched a new feature name AI Portrait that uses artificial intelligence to create amazing and cool effects. It uses the latest technology to separate the background and humans in the footage to help you remove the background with a single click. So, let’s get started with the process of making stunning reaction videos with Filmora’s AI Portrait.
You might be interested in:
Step 01: Open Filmora X. If it is not already installed on your PC, you can download it from here and install it on your PC.
Step 02: Import the video that you want to react to and your reaction video. If you have not already recorded your reaction, then record it first using any camera or smartphone.
Step 03: Place both of these videos into the timeline. Make sure to place your reaction above.
Step 04: Select your reaction video on the timeline and go to the “Effects”. Here you will find a new folder named “AI Portrait”, open it. Here you will find multiple AI portrait effects.
Step 05: Our goal is to remove the background of the reaction. To do that, we will use Human Segmentation. Drag and drop Human Segmentation into the reaction video. If you haven’t purchased this effect already, it will ask you to buy it to export the video. But you want to try it first, click on “Try It.”
Step 06: Once the effect is successfully applied to the video, its background will be removed automatically.
Step 07: Adjust the video by making it smaller and place it in the bottom left corner of the screen. Your reaction video is ready to be uploaded on video-sharing platforms.
Step 08: To make your video look cool and stunning, you can also add multiple other effects to your reaction. AI portrait allows you to add a border around the character to make it look more visible and separate it from another video. Go to the AI portrait and drag Human Border Effect and drop it into your reaction. It will create an outline around the character and make it look more visible.
Step 09: In some instances, you might need to change the position or size of your reaction. You can easily do that by applying the Keyframes to it. If you feel like changing the part of your reaction at some point in the video, go to that point in the timeline and click on the keyframe button above the timeline.
Step 10: Once you click on the keyframe, it will add a keyframe to the video. Now move forward into the timeline to a point and adjust your character’s position by dragging it. Let’s move it to the bottom right corner. It will add another keyframe to the video in the timeline. Now the character will change its position from the left corner to the right corner once it reaches that specific point in time.
Conclusion
AI Portrait allows you to create wonderful effects using artificial intelligence. This is one of the best uses of AI to make stunning reaction videos. It will not only save you a lot of time but will also help you save a lot of money by helping you remove the background of your video without expensive materials such as a green screen and other materials related to it.
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Liza Brown
Mar 27, 2024• Proven solutions
With several video-sharing platforms and billions of videos on those platforms, it is very difficult and competitive to make your mark and have an identity. There are hundreds of categories of videos that you can find on the platforms like Youtube, Dailymotion, Vimeo, and more. Among all those categories, reaction videos are one of the most popular categories. It allows a person to review another person’s opinion, view, or idea about any particular issue or instance. Most of the video-sharing platforms enable their users to make all kinds of reaction videos without any restriction. Having such a huge competition makes it hard to stand out and attract viewers.
Have you ever seen videos where the reactor has a transparent background instead of the rectangle box in the corner? They look nice and engaging, right? The process of making such videos will require so many materials such as a green screen, stand, and other materials to support it. It is difficult for everyone to afford all these and secondly, it is very difficult to carry from one place to another.
With Filmora X, you can create such transparent background reaction videos without such expensive material. Filmora has launched a new feature name AI Portrait that uses artificial intelligence to create amazing and cool effects. It uses the latest technology to separate the background and humans in the footage to help you remove the background with a single click. So, let’s get started with the process of making stunning reaction videos with Filmora’s AI Portrait.
You might be interested in:
Step 01: Open Filmora X. If it is not already installed on your PC, you can download it from here and install it on your PC.
Step 02: Import the video that you want to react to and your reaction video. If you have not already recorded your reaction, then record it first using any camera or smartphone.
Step 03: Place both of these videos into the timeline. Make sure to place your reaction above.
Step 04: Select your reaction video on the timeline and go to the “Effects”. Here you will find a new folder named “AI Portrait”, open it. Here you will find multiple AI portrait effects.
Step 05: Our goal is to remove the background of the reaction. To do that, we will use Human Segmentation. Drag and drop Human Segmentation into the reaction video. If you haven’t purchased this effect already, it will ask you to buy it to export the video. But you want to try it first, click on “Try It.”
Step 06: Once the effect is successfully applied to the video, its background will be removed automatically.
Step 07: Adjust the video by making it smaller and place it in the bottom left corner of the screen. Your reaction video is ready to be uploaded on video-sharing platforms.
Step 08: To make your video look cool and stunning, you can also add multiple other effects to your reaction. AI portrait allows you to add a border around the character to make it look more visible and separate it from another video. Go to the AI portrait and drag Human Border Effect and drop it into your reaction. It will create an outline around the character and make it look more visible.
Step 09: In some instances, you might need to change the position or size of your reaction. You can easily do that by applying the Keyframes to it. If you feel like changing the part of your reaction at some point in the video, go to that point in the timeline and click on the keyframe button above the timeline.
Step 10: Once you click on the keyframe, it will add a keyframe to the video. Now move forward into the timeline to a point and adjust your character’s position by dragging it. Let’s move it to the bottom right corner. It will add another keyframe to the video in the timeline. Now the character will change its position from the left corner to the right corner once it reaches that specific point in time.
Conclusion
AI Portrait allows you to create wonderful effects using artificial intelligence. This is one of the best uses of AI to make stunning reaction videos. It will not only save you a lot of time but will also help you save a lot of money by helping you remove the background of your video without expensive materials such as a green screen and other materials related to it.
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Liza Brown
Mar 27, 2024• Proven solutions
With several video-sharing platforms and billions of videos on those platforms, it is very difficult and competitive to make your mark and have an identity. There are hundreds of categories of videos that you can find on the platforms like Youtube, Dailymotion, Vimeo, and more. Among all those categories, reaction videos are one of the most popular categories. It allows a person to review another person’s opinion, view, or idea about any particular issue or instance. Most of the video-sharing platforms enable their users to make all kinds of reaction videos without any restriction. Having such a huge competition makes it hard to stand out and attract viewers.
Have you ever seen videos where the reactor has a transparent background instead of the rectangle box in the corner? They look nice and engaging, right? The process of making such videos will require so many materials such as a green screen, stand, and other materials to support it. It is difficult for everyone to afford all these and secondly, it is very difficult to carry from one place to another.
With Filmora X, you can create such transparent background reaction videos without such expensive material. Filmora has launched a new feature name AI Portrait that uses artificial intelligence to create amazing and cool effects. It uses the latest technology to separate the background and humans in the footage to help you remove the background with a single click. So, let’s get started with the process of making stunning reaction videos with Filmora’s AI Portrait.
You might be interested in:
Step 01: Open Filmora X. If it is not already installed on your PC, you can download it from here and install it on your PC.
Step 02: Import the video that you want to react to and your reaction video. If you have not already recorded your reaction, then record it first using any camera or smartphone.
Step 03: Place both of these videos into the timeline. Make sure to place your reaction above.
Step 04: Select your reaction video on the timeline and go to the “Effects”. Here you will find a new folder named “AI Portrait”, open it. Here you will find multiple AI portrait effects.
Step 05: Our goal is to remove the background of the reaction. To do that, we will use Human Segmentation. Drag and drop Human Segmentation into the reaction video. If you haven’t purchased this effect already, it will ask you to buy it to export the video. But you want to try it first, click on “Try It.”
Step 06: Once the effect is successfully applied to the video, its background will be removed automatically.
Step 07: Adjust the video by making it smaller and place it in the bottom left corner of the screen. Your reaction video is ready to be uploaded on video-sharing platforms.
Step 08: To make your video look cool and stunning, you can also add multiple other effects to your reaction. AI portrait allows you to add a border around the character to make it look more visible and separate it from another video. Go to the AI portrait and drag Human Border Effect and drop it into your reaction. It will create an outline around the character and make it look more visible.
Step 09: In some instances, you might need to change the position or size of your reaction. You can easily do that by applying the Keyframes to it. If you feel like changing the part of your reaction at some point in the video, go to that point in the timeline and click on the keyframe button above the timeline.
Step 10: Once you click on the keyframe, it will add a keyframe to the video. Now move forward into the timeline to a point and adjust your character’s position by dragging it. Let’s move it to the bottom right corner. It will add another keyframe to the video in the timeline. Now the character will change its position from the left corner to the right corner once it reaches that specific point in time.
Conclusion
AI Portrait allows you to create wonderful effects using artificial intelligence. This is one of the best uses of AI to make stunning reaction videos. It will not only save you a lot of time but will also help you save a lot of money by helping you remove the background of your video without expensive materials such as a green screen and other materials related to it.
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Linux on Chrome OS: A Step-by-Step Installation Guide (Updated 2023)
How to Install Linux on Chromebook
Ollie Mattison
Mar 27, 2024• Proven solutions
Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.
Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.
- Part 1: Preparing before installing Linux OS on Chromebook
- Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
- Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
- Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
- Part 5: Recommended Linux Video Editing Software
Part 1: Preparing before installing Linux OS on Chromebook
The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.
- Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
- Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
- Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.
Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.
1. Acessing the developer mode
The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.
2. Installing Chroot
At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.
Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.
3. Optimizing your new OS
You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.
4. Remove Chroot from your Chromebook
If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.
Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.
1. Preparation for the installation
Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.
2. Installing ChrUbuntu
Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.
Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.
3. Uninstall ChrUbuntu
Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.
This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.
Part 4: How to Dual-Boot a Chromebook Using Gallium OS
If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.
1. Preparation for the installation
In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.
2. Enabling the Legacy Mode
Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.
3. Installation process
If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.
Which Method is the Best?
Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.
On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.
Part 5: Recommended Linux Video Editing Software: Lightworks
Price: $24.99/month, although free versions of the software are also available.
What we like: A powerful video and audio editor perfectly suited for the production of professional video content.
What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.
Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.
The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.
Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.
- Part 1: Preparing before installing Linux OS on Chromebook
- Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
- Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
- Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
- Part 5: Recommended Linux Video Editing Software
Part 1: Preparing before installing Linux OS on Chromebook
The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.
- Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
- Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
- Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.
Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.
1. Acessing the developer mode
The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.
2. Installing Chroot
At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.
Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.
3. Optimizing your new OS
You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.
4. Remove Chroot from your Chromebook
If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.
Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.
1. Preparation for the installation
Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.
2. Installing ChrUbuntu
Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.
Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.
3. Uninstall ChrUbuntu
Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.
This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.
Part 4: How to Dual-Boot a Chromebook Using Gallium OS
If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.
1. Preparation for the installation
In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.
2. Enabling the Legacy Mode
Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.
3. Installation process
If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.
Which Method is the Best?
Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.
On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.
Part 5: Recommended Linux Video Editing Software: Lightworks
Price: $24.99/month, although free versions of the software are also available.
What we like: A powerful video and audio editor perfectly suited for the production of professional video content.
What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.
Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.
The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.
Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.
- Part 1: Preparing before installing Linux OS on Chromebook
- Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
- Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
- Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
- Part 5: Recommended Linux Video Editing Software
Part 1: Preparing before installing Linux OS on Chromebook
The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.
- Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
- Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
- Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.
Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.
1. Acessing the developer mode
The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.
2. Installing Chroot
At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.
Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.
3. Optimizing your new OS
You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.
4. Remove Chroot from your Chromebook
If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.
Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.
1. Preparation for the installation
Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.
2. Installing ChrUbuntu
Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.
Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.
3. Uninstall ChrUbuntu
Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.
This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.
Part 4: How to Dual-Boot a Chromebook Using Gallium OS
If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.
1. Preparation for the installation
In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.
2. Enabling the Legacy Mode
Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.
3. Installation process
If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.
Which Method is the Best?
Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.
On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.
Part 5: Recommended Linux Video Editing Software: Lightworks
Price: $24.99/month, although free versions of the software are also available.
What we like: A powerful video and audio editor perfectly suited for the production of professional video content.
What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.
Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.
The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.
Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.
- Part 1: Preparing before installing Linux OS on Chromebook
- Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
- Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
- Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
- Part 5: Recommended Linux Video Editing Software
Part 1: Preparing before installing Linux OS on Chromebook
The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.
- Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
- Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
- Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.
Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.
1. Acessing the developer mode
The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.
2. Installing Chroot
At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.
Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.
3. Optimizing your new OS
You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.
4. Remove Chroot from your Chromebook
If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.
Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.
1. Preparation for the installation
Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.
2. Installing ChrUbuntu
Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.
Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.
3. Uninstall ChrUbuntu
Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.
This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.
Part 4: How to Dual-Boot a Chromebook Using Gallium OS
If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.
1. Preparation for the installation
In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.
2. Enabling the Legacy Mode
Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.
3. Installation process
If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.
Which Method is the Best?
Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.
On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.
Part 5: Recommended Linux Video Editing Software: Lightworks
Price: $24.99/month, although free versions of the software are also available.
What we like: A powerful video and audio editor perfectly suited for the production of professional video content.
What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.
Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.
The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
10 Best Free Subtitle Makers Online
When you watch a video online, it’s usually has a title and description. But what if the viewer doesn’t speak the same language as the speaker? Thankfully, there are subtitle maker online that you can use to create subtitles for any video.
Subtitles are excellent for those who want to learn a new language. It is also suitable for those who have trouble hearing. These subtitles can be added to the video by using subtitle maker online. Many subtitle makers are available, but we will discuss the top 10 subtitle creator online.
Best Free Subtitle Makers to Add Subtitles to Video Online
1. Adobe Creative Cloud Express
Creative Cloud Express is re-branded from Adobe Spark, a web and mobile app for creating multimeadia content. With Creative Cloud Express, you can add subtitles or captions to videos online without downloading any software on your computer. It also provides lots of editing tools such as convert video to GIF, reverse videos, merge videos, resize videos for different social , and change video speed.
You can use Creative Cloud Express for free, which includes most core features, but if you want to upgrade to use all features and assets, you may need to pay $9.99/month for the premium plan.
To add subtitles to video with Creative Cloud Express, follow the steps below:
- Visit https://www.adobe.com/express/feature/video/add-subtitle and click Add subtitles to your videos now to get started. Follow the instruction to sign up and sign in your account.
- Adobe will ask you to pick a story template, but you can always start from scratch. Here I will choose a template.
- Now import video or picture material from your computer, and adjust its position in the timeline.
- Pick from a variety of subtitle layout alternatives and change the text size as necessary.
- After adding titles and subtitles to your video, click the Download button to save your video to local computer.
If you prefer to add subtitles to video on Windows or Mac computer, you can try Filmora video editor . Compared with those online tools, Filmora video editor is undoubtedly a great choice for those who need more customized and stylish subtitles.
For Win 7 or later (64-bit)
Secure Download
For macOS 10.12 or later
Secure Download
Whether you want to edit home movies to send to family and friends or upload to YouTube and Vimeo for sharing, this video editor from Wondershare Filmora can help take your videos to a higher level effortlessly. Here, let’s take a look at the main features of this video editing software.
Filmora is compatible with the Filmstock effects store, an online stock media including video effects, va library for your video projects,video footage, music, sound effects, and stock images as well.
2. Kapwing
As one of the best online video editors , Kapwing allows you to add subtitles to the video easily. It gives three options for adding subtitles: upload an SRT file, manually add them, or have them auto-generated . It opens the video in the online video editor in either situation.
You can place subtitles anywhere on the screen, and you can relocate them at any time. Apart from that, you can customize the text’s appearance with formatting options, text color, and background color. However, you can export videos up to 30 minutes long for free, and to export longer video, you need to pay $16 per month. And in order to download the edited video without a watermark, you must create an account.
To use Kapwing subtitle creator online, follow these steps:
- Go to https://www.kapwing.com/subtitles , and upload your video file.
- On the Add Subtitles screen, choose the method for adding subtitles: add subtitles manually, or use auto-generated, or upload .SRT file. Here I will try add subtitles manually.
- When adding subtitles, make sure the timestamps are correct on the video. (If required) Set the time for precise sync (if desired).
- Click the “Done” button to return to the main editor. Click Export Video and then download it with embedded subtitles.
3. Clideo
Clideo is a video creation app that lets users add subtitles to their own videos. You can add subtitles in any language from an official list of languages available on the website. After adding the subtitle, you can re-position it anywhere on the screen with a few clicks. For free users, Claudio only allows HD exports, and they cannot download the video without a watermark.
To use this subtitle maker online tool, follow these steps:
- Visit https://clideo.com/add-subtitles-to-video and click Add subtitles to your videos now to get started after you register yourself on Clideo with your email id and password.
- Upload the video file from local storage, Google Drive or Dropbox, and then pick an option for adding captions: manually or using a subtitle file. Select the first instance, click “Add subtitle,” type your text, and set the timings.
You can also add a title, leader lines, and subheadings to your presentation. The font, color, background, size, and slide alignment are adjustable.
4. Veed.io
Veed.io is another easy-to-use web video editing tool with several subtitle options for adding subtitles. You can add subtitles quickly and easily, type them manually or upload them in SRT file format.
Veed is an automated subtitling platform that helps people add subtitles online to their YouTube videos without using off-the-shelf subtitle processing software. It is suitable for individuals who have no time or patience to type out long sentence structures one letter at a time. You can start without an account.
You can choose the color of the text, the background of subtitles, and more, to make your film look more attractive. It allows you to share your movies with friends via social media networks like Twitter and Facebook.
To use Veed subtitle creator online, follow these steps:
- Go to https://www.veed.io/tools/auto-subtitle-generator and click on “Get Started.” You can select a blank project or a template.
- Go to the Project Settings section on the left. Choose any one of them depending on your requirements and click Next.
- While using automated transcription, you have to upload.SRT subtitle file or enter the transcript manually.
- You can also personalize the text, color, size, font, alignment, and anything else you want.Make changes to the timeline and then sync the subtitles.
- After that, go to the Export and save the video.
5. Flixier
Flixier is one of the most accessible tools to add subtitles online. Flixier is an efficient auto subtitle generation and syncing platform. You can add any video file type with auto subtitles in Flixier. You can add auto subtitles to MPEG, MP4, MOV, AVI, or any other file on your system. There is no need to convert the video or do extra work. This automatic subtitle maker takes care of everything.
Flixier allows you to make a video subtitle automatically and manually create one or add a subtitle from your computer. You may submit any type of subtitle file (SRT, VTT, ASS, SSA, TXT).
To use Flixier subtitle maker online, follow these steps:
- Go to https://flixier.com/tools/auto-subtitle-generator and click on “Get Started.”
- You must first upload your videos to the Flixier library to create subtitles automatically.
- You may do so by uploading from your computer, importing from cloud storage services, or straight from YouTube, Zoom, or Twitch.
- After importing them, you may drag and drop your movie clips on the Flixier timeline.
- In the pop-up window that appears, click on one, and a button saying “Generate Auto Subtitle” will appear on the right. After you’ve finished your work, click start to have your subtitling generated and added onto the timeline where you can continue making changes.
- Finally, Flixier’s cloud rendering engine lets you export your film in minutes.
- Now, you may save the video to your computer or send it straight to social media.
6. Subtitle Horse
Subtitle Horse is a browser-based subtitler for online video captioning. There are many features, such as real-time validation, an interactive timeline, and shortcuts. Subtitle horse is highly configurable: Subtitles may be made by both amateurs and experts. Users must create an account to upload videos.
With the free version of subtitle horse, you may add subtitles and captions to your video. You may export your subtitles in the necessary formats (SRT, TimedText, WebVTT, etc.). The video can be accessed online, on a platform like YouTube, Dropbox, or others.
To use Subtitle-Horse subtitle creator online, follow these steps:
- Go to https://subtitle-horse.com/ and click on “Create subtitles with the free version.”
- Upload your video or add a URL by clicking the “Add Project” button
- Click “Next” and select “Frame Rate” and “Waveform.”
- Click “Start Subtitling”
- After adding subtitles, you can download them for free or buy HD-quality MP4 videos.
7. Subtitle Bee
SubtitleBee understands and automatically translates more than 120 languages across the world. Before uploading your video, simply choose your language and let SubtitleBee handle the rest by adding subtitles in your desired language.
The algorithm is about 95% accurate in detecting your voice and adding automated captions based on most languages. AI subtitle translation allows you to translate subtitles into other languages. You can use it for free with limited features and watermarked files. There is a time limit on free trial accounts, so you can add videos shorter than 10 minutes in length.
To use Subtitle-Bee subtitle maker online, follow these steps:
- Go to https://subtitlebee.com/ and click on “Add subtitles now”
- Then select the language of the current media voices.
- Now, Upload your video or paste a URL from Youtube, Vimeo, or self-hosted.
- Make any modifications as needed by editing the subtitles to meet your demands.
- Simply add the text you want and customize it to your own needs.
- Choose the social networking site that you wish to publish on.
- Download and encode your video with the subtitles included.
8. Fastreel
Fastreel allows you to create a video with subs and change the text settings: font, size, color, style, and position. A free membership will allow you to produce and share videos in the format of your choice, as well as access stock media. The cost of a paid subscription is $5.95 per video.
Furthermore, there are several colorful templates for various events — explainer videos, wedding films, YouTube intros, customer testimonials, and so forth. To personalize each template, you may use your own photos, films, music, and text. Plus, every template has its own title and transition style. Fastreel is not made for professional users; it’s a tool for novices and those searching for fast answers.
To use Fastreel subtitle creator online, follow these steps:
- Go to https://www.fastreel.com/add-subtitles-to-video.html and click on “Add subtitles now”
- Click the Add Your File button to upload any MOV, MKV, AVI, WMV, or MP4 content less than 500 MB in size. You can add subtitles only to the first hour of a film; therefore, it’s best to pick one with fewer subtitles.
- To add an SRT file to a video, select Upload SRT. You can modify each caption and its timing.
- You can also alter the text’s font, size, color, style, and position. The button labeled “Download SRT” allows you to save the subtitles file for later use.
- Then, scroll down to the bottom of the page and click Continue.
- After finishing, click the Export button. Choose a name and destination for your video, then choose a format. You’ll see the export window where you can select a save option that is appropriate for you. Subtitles will be permanently added to the video.
9. EZGIF
EZGIF is a well-known website for animated GIFs. EZGIF has several tools for GIFs, Photos, and Videos. It offers an online tool to add subtitles to videos that you may use. It’s pretty simple to utilize and provides two methods for adding subtitles. You can upload a maximum of 100 MB on EZGIF. If your video is larger than 100 MB, you may compress it using EZGIF.
To add subtitles to a video on EZGIF, follow these steps:
- Go to https://ezgif.com/video-subtitles .
- Upload a video file or copy and paste the URL of a video available on the internet.
- To add subtitles, click the “Upload” button. To enter them manually, scroll to the bottom of the screen.
- Simply type the subtitle in the box, then set the time duration for when it should appear in the video. To cover the whole video, you may add more subtitles as well.
- After that, click “Add Subtitles” and then save the output.
10. PROMO
Promo is a website that makes promotion easier. This online tool lets users add basic subtitles to videos with ease as a video creation software. This site is free of charge and does not require registration to use the subtitle function, but it does give you an ad at the beginning of your finished video.
Using Promo, you may add video captions or subtitles from your browser anytime, anytime, anyplace. There’s no need to download anything; it’s as simple as clicking a link. The free version comes with a watermark. For the ad-free version, there is a $99/month fee.
To add subtitles with Promo subtitle maker online, follow the steps below:
- Go to https://promo.com/tools/add-subtitles-to-video .
- Upload the video you wish to caption or subtitle.
- You can use one of the platform’s professionally designed video templates or premium clips to construct a new film from the ground up.
- To add a caption to your video, after uploading it in Promo’s video editor, click the circular pink plus sign to the left of the timeline. Choose “Add Caption” from the dropdown menu.
- After you’ve added and positioned, and designed your subtitles with beautiful text and colors, click Save & Preview to view your creation and publish or download it.
Conclusion
If you need subtitles for your videos, it is important to find the best subtitle maker online that will suit all of your needs. Whether you are looking for a free option or want something with more customization, there are plenty of options available online. Check out our list, and make sure to choose one that suits what you need!
Creative Cloud Express is re-branded from Adobe Spark, a web and mobile app for creating multimeadia content. With Creative Cloud Express, you can add subtitles or captions to videos online without downloading any software on your computer. It also provides lots of editing tools such as convert video to GIF, reverse videos, merge videos, resize videos for different social , and change video speed.
You can use Creative Cloud Express for free, which includes most core features, but if you want to upgrade to use all features and assets, you may need to pay $9.99/month for the premium plan.
To add subtitles to video with Creative Cloud Express, follow the steps below:
- Visit https://www.adobe.com/express/feature/video/add-subtitle and click Add subtitles to your videos now to get started. Follow the instruction to sign up and sign in your account.
- Adobe will ask you to pick a story template, but you can always start from scratch. Here I will choose a template.
- Now import video or picture material from your computer, and adjust its position in the timeline.
- Pick from a variety of subtitle layout alternatives and change the text size as necessary.
- After adding titles and subtitles to your video, click the Download button to save your video to local computer.
If you prefer to add subtitles to video on Windows or Mac computer, you can try Filmora video editor . Compared with those online tools, Filmora video editor is undoubtedly a great choice for those who need more customized and stylish subtitles.
For Win 7 or later (64-bit)
Secure Download
For macOS 10.12 or later
Secure Download
Whether you want to edit home movies to send to family and friends or upload to YouTube and Vimeo for sharing, this video editor from Wondershare Filmora can help take your videos to a higher level effortlessly. Here, let’s take a look at the main features of this video editing software.
Filmora is compatible with the Filmstock effects store, an online stock media including video effects, va library for your video projects,video footage, music, sound effects, and stock images as well.
2. Kapwing
As one of the best online video editors , Kapwing allows you to add subtitles to the video easily. It gives three options for adding subtitles: upload an SRT file, manually add them, or have them auto-generated . It opens the video in the online video editor in either situation.
You can place subtitles anywhere on the screen, and you can relocate them at any time. Apart from that, you can customize the text’s appearance with formatting options, text color, and background color. However, you can export videos up to 30 minutes long for free, and to export longer video, you need to pay $16 per month. And in order to download the edited video without a watermark, you must create an account.
To use Kapwing subtitle creator online, follow these steps:
- Go to https://www.kapwing.com/subtitles , and upload your video file.
- On the Add Subtitles screen, choose the method for adding subtitles: add subtitles manually, or use auto-generated, or upload .SRT file. Here I will try add subtitles manually.
- When adding subtitles, make sure the timestamps are correct on the video. (If required) Set the time for precise sync (if desired).
- Click the “Done” button to return to the main editor. Click Export Video and then download it with embedded subtitles.
3. Clideo
Clideo is a video creation app that lets users add subtitles to their own videos. You can add subtitles in any language from an official list of languages available on the website. After adding the subtitle, you can re-position it anywhere on the screen with a few clicks. For free users, Claudio only allows HD exports, and they cannot download the video without a watermark.
To use this subtitle maker online tool, follow these steps:
- Visit https://clideo.com/add-subtitles-to-video and click Add subtitles to your videos now to get started after you register yourself on Clideo with your email id and password.
- Upload the video file from local storage, Google Drive or Dropbox, and then pick an option for adding captions: manually or using a subtitle file. Select the first instance, click “Add subtitle,” type your text, and set the timings.
You can also add a title, leader lines, and subheadings to your presentation. The font, color, background, size, and slide alignment are adjustable.
4. Veed.io
Veed.io is another easy-to-use web video editing tool with several subtitle options for adding subtitles. You can add subtitles quickly and easily, type them manually or upload them in SRT file format.
Veed is an automated subtitling platform that helps people add subtitles online to their YouTube videos without using off-the-shelf subtitle processing software. It is suitable for individuals who have no time or patience to type out long sentence structures one letter at a time. You can start without an account.
You can choose the color of the text, the background of subtitles, and more, to make your film look more attractive. It allows you to share your movies with friends via social media networks like Twitter and Facebook.
To use Veed subtitle creator online, follow these steps:
- Go to https://www.veed.io/tools/auto-subtitle-generator and click on “Get Started.” You can select a blank project or a template.
- Go to the Project Settings section on the left. Choose any one of them depending on your requirements and click Next.
- While using automated transcription, you have to upload.SRT subtitle file or enter the transcript manually.
- You can also personalize the text, color, size, font, alignment, and anything else you want.Make changes to the timeline and then sync the subtitles.
- After that, go to the Export and save the video.
5. Flixier
Flixier is one of the most accessible tools to add subtitles online. Flixier is an efficient auto subtitle generation and syncing platform. You can add any video file type with auto subtitles in Flixier. You can add auto subtitles to MPEG, MP4, MOV, AVI, or any other file on your system. There is no need to convert the video or do extra work. This automatic subtitle maker takes care of everything.
Flixier allows you to make a video subtitle automatically and manually create one or add a subtitle from your computer. You may submit any type of subtitle file (SRT, VTT, ASS, SSA, TXT).
To use Flixier subtitle maker online, follow these steps:
- Go to https://flixier.com/tools/auto-subtitle-generator and click on “Get Started.”
- You must first upload your videos to the Flixier library to create subtitles automatically.
- You may do so by uploading from your computer, importing from cloud storage services, or straight from YouTube, Zoom, or Twitch.
- After importing them, you may drag and drop your movie clips on the Flixier timeline.
- In the pop-up window that appears, click on one, and a button saying “Generate Auto Subtitle” will appear on the right. After you’ve finished your work, click start to have your subtitling generated and added onto the timeline where you can continue making changes.
- Finally, Flixier’s cloud rendering engine lets you export your film in minutes.
- Now, you may save the video to your computer or send it straight to social media.
6. Subtitle Horse
Subtitle Horse is a browser-based subtitler for online video captioning. There are many features, such as real-time validation, an interactive timeline, and shortcuts. Subtitle horse is highly configurable: Subtitles may be made by both amateurs and experts. Users must create an account to upload videos.
With the free version of subtitle horse, you may add subtitles and captions to your video. You may export your subtitles in the necessary formats (SRT, TimedText, WebVTT, etc.). The video can be accessed online, on a platform like YouTube, Dropbox, or others.
To use Subtitle-Horse subtitle creator online, follow these steps:
- Go to https://subtitle-horse.com/ and click on “Create subtitles with the free version.”
- Upload your video or add a URL by clicking the “Add Project” button
- Click “Next” and select “Frame Rate” and “Waveform.”
- Click “Start Subtitling”
- After adding subtitles, you can download them for free or buy HD-quality MP4 videos.
7. Subtitle Bee
SubtitleBee understands and automatically translates more than 120 languages across the world. Before uploading your video, simply choose your language and let SubtitleBee handle the rest by adding subtitles in your desired language.
The algorithm is about 95% accurate in detecting your voice and adding automated captions based on most languages. AI subtitle translation allows you to translate subtitles into other languages. You can use it for free with limited features and watermarked files. There is a time limit on free trial accounts, so you can add videos shorter than 10 minutes in length.
To use Subtitle-Bee subtitle maker online, follow these steps:
- Go to https://subtitlebee.com/ and click on “Add subtitles now”
- Then select the language of the current media voices.
- Now, Upload your video or paste a URL from Youtube, Vimeo, or self-hosted.
- Make any modifications as needed by editing the subtitles to meet your demands.
- Simply add the text you want and customize it to your own needs.
- Choose the social networking site that you wish to publish on.
- Download and encode your video with the subtitles included.
8. Fastreel
Fastreel allows you to create a video with subs and change the text settings: font, size, color, style, and position. A free membership will allow you to produce and share videos in the format of your choice, as well as access stock media. The cost of a paid subscription is $5.95 per video.
Furthermore, there are several colorful templates for various events — explainer videos, wedding films, YouTube intros, customer testimonials, and so forth. To personalize each template, you may use your own photos, films, music, and text. Plus, every template has its own title and transition style. Fastreel is not made for professional users; it’s a tool for novices and those searching for fast answers.
To use Fastreel subtitle creator online, follow these steps:
- Go to https://www.fastreel.com/add-subtitles-to-video.html and click on “Add subtitles now”
- Click the Add Your File button to upload any MOV, MKV, AVI, WMV, or MP4 content less than 500 MB in size. You can add subtitles only to the first hour of a film; therefore, it’s best to pick one with fewer subtitles.
- To add an SRT file to a video, select Upload SRT. You can modify each caption and its timing.
- You can also alter the text’s font, size, color, style, and position. The button labeled “Download SRT” allows you to save the subtitles file for later use.
- Then, scroll down to the bottom of the page and click Continue.
- After finishing, click the Export button. Choose a name and destination for your video, then choose a format. You’ll see the export window where you can select a save option that is appropriate for you. Subtitles will be permanently added to the video.
9. EZGIF
EZGIF is a well-known website for animated GIFs. EZGIF has several tools for GIFs, Photos, and Videos. It offers an online tool to add subtitles to videos that you may use. It’s pretty simple to utilize and provides two methods for adding subtitles. You can upload a maximum of 100 MB on EZGIF. If your video is larger than 100 MB, you may compress it using EZGIF.
To add subtitles to a video on EZGIF, follow these steps:
- Go to https://ezgif.com/video-subtitles .
- Upload a video file or copy and paste the URL of a video available on the internet.
- To add subtitles, click the “Upload” button. To enter them manually, scroll to the bottom of the screen.
- Simply type the subtitle in the box, then set the time duration for when it should appear in the video. To cover the whole video, you may add more subtitles as well.
- After that, click “Add Subtitles” and then save the output.
10. PROMO
Promo is a website that makes promotion easier. This online tool lets users add basic subtitles to videos with ease as a video creation software. This site is free of charge and does not require registration to use the subtitle function, but it does give you an ad at the beginning of your finished video.
Using Promo, you may add video captions or subtitles from your browser anytime, anytime, anyplace. There’s no need to download anything; it’s as simple as clicking a link. The free version comes with a watermark. For the ad-free version, there is a $99/month fee.
To add subtitles with Promo subtitle maker online, follow the steps below:
- Go to https://promo.com/tools/add-subtitles-to-video .
- Upload the video you wish to caption or subtitle.
- You can use one of the platform’s professionally designed video templates or premium clips to construct a new film from the ground up.
- To add a caption to your video, after uploading it in Promo’s video editor, click the circular pink plus sign to the left of the timeline. Choose “Add Caption” from the dropdown menu.
- After you’ve added and positioned, and designed your subtitles with beautiful text and colors, click Save & Preview to view your creation and publish or download it.
Conclusion
If you need subtitles for your videos, it is important to find the best subtitle maker online that will suit all of your needs. Whether you are looking for a free option or want something with more customization, there are plenty of options available online. Check out our list, and make sure to choose one that suits what you need!
Creative Cloud Express is re-branded from Adobe Spark, a web and mobile app for creating multimeadia content. With Creative Cloud Express, you can add subtitles or captions to videos online without downloading any software on your computer. It also provides lots of editing tools such as convert video to GIF, reverse videos, merge videos, resize videos for different social , and change video speed.
You can use Creative Cloud Express for free, which includes most core features, but if you want to upgrade to use all features and assets, you may need to pay $9.99/month for the premium plan.
To add subtitles to video with Creative Cloud Express, follow the steps below:
- Visit https://www.adobe.com/express/feature/video/add-subtitle and click Add subtitles to your videos now to get started. Follow the instruction to sign up and sign in your account.
- Adobe will ask you to pick a story template, but you can always start from scratch. Here I will choose a template.
- Now import video or picture material from your computer, and adjust its position in the timeline.
- Pick from a variety of subtitle layout alternatives and change the text size as necessary.
- After adding titles and subtitles to your video, click the Download button to save your video to local computer.
If you prefer to add subtitles to video on Windows or Mac computer, you can try Filmora video editor . Compared with those online tools, Filmora video editor is undoubtedly a great choice for those who need more customized and stylish subtitles.
For Win 7 or later (64-bit)
Secure Download
For macOS 10.12 or later
Secure Download
Whether you want to edit home movies to send to family and friends or upload to YouTube and Vimeo for sharing, this video editor from Wondershare Filmora can help take your videos to a higher level effortlessly. Here, let’s take a look at the main features of this video editing software.
Filmora is compatible with the Filmstock effects store, an online stock media including video effects, va library for your video projects,video footage, music, sound effects, and stock images as well.
2. Kapwing
As one of the best online video editors , Kapwing allows you to add subtitles to the video easily. It gives three options for adding subtitles: upload an SRT file, manually add them, or have them auto-generated . It opens the video in the online video editor in either situation.
You can place subtitles anywhere on the screen, and you can relocate them at any time. Apart from that, you can customize the text’s appearance with formatting options, text color, and background color. However, you can export videos up to 30 minutes long for free, and to export longer video, you need to pay $16 per month. And in order to download the edited video without a watermark, you must create an account.
To use Kapwing subtitle creator online, follow these steps:
- Go to https://www.kapwing.com/subtitles , and upload your video file.
- On the Add Subtitles screen, choose the method for adding subtitles: add subtitles manually, or use auto-generated, or upload .SRT file. Here I will try add subtitles manually.
- When adding subtitles, make sure the timestamps are correct on the video. (If required) Set the time for precise sync (if desired).
- Click the “Done” button to return to the main editor. Click Export Video and then download it with embedded subtitles.
3. Clideo
Clideo is a video creation app that lets users add subtitles to their own videos. You can add subtitles in any language from an official list of languages available on the website. After adding the subtitle, you can re-position it anywhere on the screen with a few clicks. For free users, Claudio only allows HD exports, and they cannot download the video without a watermark.
To use this subtitle maker online tool, follow these steps:
- Visit https://clideo.com/add-subtitles-to-video and click Add subtitles to your videos now to get started after you register yourself on Clideo with your email id and password.
- Upload the video file from local storage, Google Drive or Dropbox, and then pick an option for adding captions: manually or using a subtitle file. Select the first instance, click “Add subtitle,” type your text, and set the timings.
You can also add a title, leader lines, and subheadings to your presentation. The font, color, background, size, and slide alignment are adjustable.
4. Veed.io
Veed.io is another easy-to-use web video editing tool with several subtitle options for adding subtitles. You can add subtitles quickly and easily, type them manually or upload them in SRT file format.
Veed is an automated subtitling platform that helps people add subtitles online to their YouTube videos without using off-the-shelf subtitle processing software. It is suitable for individuals who have no time or patience to type out long sentence structures one letter at a time. You can start without an account.
You can choose the color of the text, the background of subtitles, and more, to make your film look more attractive. It allows you to share your movies with friends via social media networks like Twitter and Facebook.
To use Veed subtitle creator online, follow these steps:
- Go to https://www.veed.io/tools/auto-subtitle-generator and click on “Get Started.” You can select a blank project or a template.
- Go to the Project Settings section on the left. Choose any one of them depending on your requirements and click Next.
- While using automated transcription, you have to upload.SRT subtitle file or enter the transcript manually.
- You can also personalize the text, color, size, font, alignment, and anything else you want.Make changes to the timeline and then sync the subtitles.
- After that, go to the Export and save the video.
5. Flixier
Flixier is one of the most accessible tools to add subtitles online. Flixier is an efficient auto subtitle generation and syncing platform. You can add any video file type with auto subtitles in Flixier. You can add auto subtitles to MPEG, MP4, MOV, AVI, or any other file on your system. There is no need to convert the video or do extra work. This automatic subtitle maker takes care of everything.
Flixier allows you to make a video subtitle automatically and manually create one or add a subtitle from your computer. You may submit any type of subtitle file (SRT, VTT, ASS, SSA, TXT).
To use Flixier subtitle maker online, follow these steps:
- Go to https://flixier.com/tools/auto-subtitle-generator and click on “Get Started.”
- You must first upload your videos to the Flixier library to create subtitles automatically.
- You may do so by uploading from your computer, importing from cloud storage services, or straight from YouTube, Zoom, or Twitch.
- After importing them, you may drag and drop your movie clips on the Flixier timeline.
- In the pop-up window that appears, click on one, and a button saying “Generate Auto Subtitle” will appear on the right. After you’ve finished your work, click start to have your subtitling generated and added onto the timeline where you can continue making changes.
- Finally, Flixier’s cloud rendering engine lets you export your film in minutes.
- Now, you may save the video to your computer or send it straight to social media.
6. Subtitle Horse
Subtitle Horse is a browser-based subtitler for online video captioning. There are many features, such as real-time validation, an interactive timeline, and shortcuts. Subtitle horse is highly configurable: Subtitles may be made by both amateurs and experts. Users must create an account to upload videos.
With the free version of subtitle horse, you may add subtitles and captions to your video. You may export your subtitles in the necessary formats (SRT, TimedText, WebVTT, etc.). The video can be accessed online, on a platform like YouTube, Dropbox, or others.
To use Subtitle-Horse subtitle creator online, follow these steps:
- Go to https://subtitle-horse.com/ and click on “Create subtitles with the free version.”
- Upload your video or add a URL by clicking the “Add Project” button
- Click “Next” and select “Frame Rate” and “Waveform.”
- Click “Start Subtitling”
- After adding subtitles, you can download them for free or buy HD-quality MP4 videos.
7. Subtitle Bee
SubtitleBee understands and automatically translates more than 120 languages across the world. Before uploading your video, simply choose your language and let SubtitleBee handle the rest by adding subtitles in your desired language.
The algorithm is about 95% accurate in detecting your voice and adding automated captions based on most languages. AI subtitle translation allows you to translate subtitles into other languages. You can use it for free with limited features and watermarked files. There is a time limit on free trial accounts, so you can add videos shorter than 10 minutes in length.
To use Subtitle-Bee subtitle maker online, follow these steps:
- Go to https://subtitlebee.com/ and click on “Add subtitles now”
- Then select the language of the current media voices.
- Now, Upload your video or paste a URL from Youtube, Vimeo, or self-hosted.
- Make any modifications as needed by editing the subtitles to meet your demands.
- Simply add the text you want and customize it to your own needs.
- Choose the social networking site that you wish to publish on.
- Download and encode your video with the subtitles included.
8. Fastreel
Fastreel allows you to create a video with subs and change the text settings: font, size, color, style, and position. A free membership will allow you to produce and share videos in the format of your choice, as well as access stock media. The cost of a paid subscription is $5.95 per video.
Furthermore, there are several colorful templates for various events — explainer videos, wedding films, YouTube intros, customer testimonials, and so forth. To personalize each template, you may use your own photos, films, music, and text. Plus, every template has its own title and transition style. Fastreel is not made for professional users; it’s a tool for novices and those searching for fast answers.
To use Fastreel subtitle creator online, follow these steps:
- Go to https://www.fastreel.com/add-subtitles-to-video.html and click on “Add subtitles now”
- Click the Add Your File button to upload any MOV, MKV, AVI, WMV, or MP4 content less than 500 MB in size. You can add subtitles only to the first hour of a film; therefore, it’s best to pick one with fewer subtitles.
- To add an SRT file to a video, select Upload SRT. You can modify each caption and its timing.
- You can also alter the text’s font, size, color, style, and position. The button labeled “Download SRT” allows you to save the subtitles file for later use.
- Then, scroll down to the bottom of the page and click Continue.
- After finishing, click the Export button. Choose a name and destination for your video, then choose a format. You’ll see the export window where you can select a save option that is appropriate for you. Subtitles will be permanently added to the video.
9. EZGIF
EZGIF is a well-known website for animated GIFs. EZGIF has several tools for GIFs, Photos, and Videos. It offers an online tool to add subtitles to videos that you may use. It’s pretty simple to utilize and provides two methods for adding subtitles. You can upload a maximum of 100 MB on EZGIF. If your video is larger than 100 MB, you may compress it using EZGIF.
To add subtitles to a video on EZGIF, follow these steps:
- Go to https://ezgif.com/video-subtitles .
- Upload a video file or copy and paste the URL of a video available on the internet.
- To add subtitles, click the “Upload” button. To enter them manually, scroll to the bottom of the screen.
- Simply type the subtitle in the box, then set the time duration for when it should appear in the video. To cover the whole video, you may add more subtitles as well.
- After that, click “Add Subtitles” and then save the output.
10. PROMO
Promo is a website that makes promotion easier. This online tool lets users add basic subtitles to videos with ease as a video creation software. This site is free of charge and does not require registration to use the subtitle function, but it does give you an ad at the beginning of your finished video.
Using Promo, you may add video captions or subtitles from your browser anytime, anytime, anyplace. There’s no need to download anything; it’s as simple as clicking a link. The free version comes with a watermark. For the ad-free version, there is a $99/month fee.
To add subtitles with Promo subtitle maker online, follow the steps below:
- Go to https://promo.com/tools/add-subtitles-to-video .
- Upload the video you wish to caption or subtitle.
- You can use one of the platform’s professionally designed video templates or premium clips to construct a new film from the ground up.
- To add a caption to your video, after uploading it in Promo’s video editor, click the circular pink plus sign to the left of the timeline. Choose “Add Caption” from the dropdown menu.
- After you’ve added and positioned, and designed your subtitles with beautiful text and colors, click Save & Preview to view your creation and publish or download it.
Conclusion
If you need subtitles for your videos, it is important to find the best subtitle maker online that will suit all of your needs. Whether you are looking for a free option or want something with more customization, there are plenty of options available online. Check out our list, and make sure to choose one that suits what you need!
Creative Cloud Express is re-branded from Adobe Spark, a web and mobile app for creating multimeadia content. With Creative Cloud Express, you can add subtitles or captions to videos online without downloading any software on your computer. It also provides lots of editing tools such as convert video to GIF, reverse videos, merge videos, resize videos for different social , and change video speed.
You can use Creative Cloud Express for free, which includes most core features, but if you want to upgrade to use all features and assets, you may need to pay $9.99/month for the premium plan.
To add subtitles to video with Creative Cloud Express, follow the steps below:
- Visit https://www.adobe.com/express/feature/video/add-subtitle and click Add subtitles to your videos now to get started. Follow the instruction to sign up and sign in your account.
- Adobe will ask you to pick a story template, but you can always start from scratch. Here I will choose a template.
- Now import video or picture material from your computer, and adjust its position in the timeline.
- Pick from a variety of subtitle layout alternatives and change the text size as necessary.
- After adding titles and subtitles to your video, click the Download button to save your video to local computer.
If you prefer to add subtitles to video on Windows or Mac computer, you can try Filmora video editor . Compared with those online tools, Filmora video editor is undoubtedly a great choice for those who need more customized and stylish subtitles.
For Win 7 or later (64-bit)
Secure Download
For macOS 10.12 or later
Secure Download
Whether you want to edit home movies to send to family and friends or upload to YouTube and Vimeo for sharing, this video editor from Wondershare Filmora can help take your videos to a higher level effortlessly. Here, let’s take a look at the main features of this video editing software.
Filmora is compatible with the Filmstock effects store, an online stock media including video effects, va library for your video projects,video footage, music, sound effects, and stock images as well.
2. Kapwing
As one of the best online video editors , Kapwing allows you to add subtitles to the video easily. It gives three options for adding subtitles: upload an SRT file, manually add them, or have them auto-generated . It opens the video in the online video editor in either situation.
You can place subtitles anywhere on the screen, and you can relocate them at any time. Apart from that, you can customize the text’s appearance with formatting options, text color, and background color. However, you can export videos up to 30 minutes long for free, and to export longer video, you need to pay $16 per month. And in order to download the edited video without a watermark, you must create an account.
To use Kapwing subtitle creator online, follow these steps:
- Go to https://www.kapwing.com/subtitles , and upload your video file.
- On the Add Subtitles screen, choose the method for adding subtitles: add subtitles manually, or use auto-generated, or upload .SRT file. Here I will try add subtitles manually.
- When adding subtitles, make sure the timestamps are correct on the video. (If required) Set the time for precise sync (if desired).
- Click the “Done” button to return to the main editor. Click Export Video and then download it with embedded subtitles.
3. Clideo
Clideo is a video creation app that lets users add subtitles to their own videos. You can add subtitles in any language from an official list of languages available on the website. After adding the subtitle, you can re-position it anywhere on the screen with a few clicks. For free users, Claudio only allows HD exports, and they cannot download the video without a watermark.
To use this subtitle maker online tool, follow these steps:
- Visit https://clideo.com/add-subtitles-to-video and click Add subtitles to your videos now to get started after you register yourself on Clideo with your email id and password.
- Upload the video file from local storage, Google Drive or Dropbox, and then pick an option for adding captions: manually or using a subtitle file. Select the first instance, click “Add subtitle,” type your text, and set the timings.
You can also add a title, leader lines, and subheadings to your presentation. The font, color, background, size, and slide alignment are adjustable.
4. Veed.io
Veed.io is another easy-to-use web video editing tool with several subtitle options for adding subtitles. You can add subtitles quickly and easily, type them manually or upload them in SRT file format.
Veed is an automated subtitling platform that helps people add subtitles online to their YouTube videos without using off-the-shelf subtitle processing software. It is suitable for individuals who have no time or patience to type out long sentence structures one letter at a time. You can start without an account.
You can choose the color of the text, the background of subtitles, and more, to make your film look more attractive. It allows you to share your movies with friends via social media networks like Twitter and Facebook.
To use Veed subtitle creator online, follow these steps:
- Go to https://www.veed.io/tools/auto-subtitle-generator and click on “Get Started.” You can select a blank project or a template.
- Go to the Project Settings section on the left. Choose any one of them depending on your requirements and click Next.
- While using automated transcription, you have to upload.SRT subtitle file or enter the transcript manually.
- You can also personalize the text, color, size, font, alignment, and anything else you want.Make changes to the timeline and then sync the subtitles.
- After that, go to the Export and save the video.
5. Flixier
Flixier is one of the most accessible tools to add subtitles online. Flixier is an efficient auto subtitle generation and syncing platform. You can add any video file type with auto subtitles in Flixier. You can add auto subtitles to MPEG, MP4, MOV, AVI, or any other file on your system. There is no need to convert the video or do extra work. This automatic subtitle maker takes care of everything.
Flixier allows you to make a video subtitle automatically and manually create one or add a subtitle from your computer. You may submit any type of subtitle file (SRT, VTT, ASS, SSA, TXT).
To use Flixier subtitle maker online, follow these steps:
- Go to https://flixier.com/tools/auto-subtitle-generator and click on “Get Started.”
- You must first upload your videos to the Flixier library to create subtitles automatically.
- You may do so by uploading from your computer, importing from cloud storage services, or straight from YouTube, Zoom, or Twitch.
- After importing them, you may drag and drop your movie clips on the Flixier timeline.
- In the pop-up window that appears, click on one, and a button saying “Generate Auto Subtitle” will appear on the right. After you’ve finished your work, click start to have your subtitling generated and added onto the timeline where you can continue making changes.
- Finally, Flixier’s cloud rendering engine lets you export your film in minutes.
- Now, you may save the video to your computer or send it straight to social media.
6. Subtitle Horse
Subtitle Horse is a browser-based subtitler for online video captioning. There are many features, such as real-time validation, an interactive timeline, and shortcuts. Subtitle horse is highly configurable: Subtitles may be made by both amateurs and experts. Users must create an account to upload videos.
With the free version of subtitle horse, you may add subtitles and captions to your video. You may export your subtitles in the necessary formats (SRT, TimedText, WebVTT, etc.). The video can be accessed online, on a platform like YouTube, Dropbox, or others.
To use Subtitle-Horse subtitle creator online, follow these steps:
- Go to https://subtitle-horse.com/ and click on “Create subtitles with the free version.”
- Upload your video or add a URL by clicking the “Add Project” button
- Click “Next” and select “Frame Rate” and “Waveform.”
- Click “Start Subtitling”
- After adding subtitles, you can download them for free or buy HD-quality MP4 videos.
7. Subtitle Bee
SubtitleBee understands and automatically translates more than 120 languages across the world. Before uploading your video, simply choose your language and let SubtitleBee handle the rest by adding subtitles in your desired language.
The algorithm is about 95% accurate in detecting your voice and adding automated captions based on most languages. AI subtitle translation allows you to translate subtitles into other languages. You can use it for free with limited features and watermarked files. There is a time limit on free trial accounts, so you can add videos shorter than 10 minutes in length.
To use Subtitle-Bee subtitle maker online, follow these steps:
- Go to https://subtitlebee.com/ and click on “Add subtitles now”
- Then select the language of the current media voices.
- Now, Upload your video or paste a URL from Youtube, Vimeo, or self-hosted.
- Make any modifications as needed by editing the subtitles to meet your demands.
- Simply add the text you want and customize it to your own needs.
- Choose the social networking site that you wish to publish on.
- Download and encode your video with the subtitles included.
8. Fastreel
Fastreel allows you to create a video with subs and change the text settings: font, size, color, style, and position. A free membership will allow you to produce and share videos in the format of your choice, as well as access stock media. The cost of a paid subscription is $5.95 per video.
Furthermore, there are several colorful templates for various events — explainer videos, wedding films, YouTube intros, customer testimonials, and so forth. To personalize each template, you may use your own photos, films, music, and text. Plus, every template has its own title and transition style. Fastreel is not made for professional users; it’s a tool for novices and those searching for fast answers.
To use Fastreel subtitle creator online, follow these steps:
- Go to https://www.fastreel.com/add-subtitles-to-video.html and click on “Add subtitles now”
- Click the Add Your File button to upload any MOV, MKV, AVI, WMV, or MP4 content less than 500 MB in size. You can add subtitles only to the first hour of a film; therefore, it’s best to pick one with fewer subtitles.
- To add an SRT file to a video, select Upload SRT. You can modify each caption and its timing.
- You can also alter the text’s font, size, color, style, and position. The button labeled “Download SRT” allows you to save the subtitles file for later use.
- Then, scroll down to the bottom of the page and click Continue.
- After finishing, click the Export button. Choose a name and destination for your video, then choose a format. You’ll see the export window where you can select a save option that is appropriate for you. Subtitles will be permanently added to the video.
9. EZGIF
EZGIF is a well-known website for animated GIFs. EZGIF has several tools for GIFs, Photos, and Videos. It offers an online tool to add subtitles to videos that you may use. It’s pretty simple to utilize and provides two methods for adding subtitles. You can upload a maximum of 100 MB on EZGIF. If your video is larger than 100 MB, you may compress it using EZGIF.
To add subtitles to a video on EZGIF, follow these steps:
- Go to https://ezgif.com/video-subtitles .
- Upload a video file or copy and paste the URL of a video available on the internet.
- To add subtitles, click the “Upload” button. To enter them manually, scroll to the bottom of the screen.
- Simply type the subtitle in the box, then set the time duration for when it should appear in the video. To cover the whole video, you may add more subtitles as well.
- After that, click “Add Subtitles” and then save the output.
10. PROMO
Promo is a website that makes promotion easier. This online tool lets users add basic subtitles to videos with ease as a video creation software. This site is free of charge and does not require registration to use the subtitle function, but it does give you an ad at the beginning of your finished video.
Using Promo, you may add video captions or subtitles from your browser anytime, anytime, anyplace. There’s no need to download anything; it’s as simple as clicking a link. The free version comes with a watermark. For the ad-free version, there is a $99/month fee.
To add subtitles with Promo subtitle maker online, follow the steps below:
- Go to https://promo.com/tools/add-subtitles-to-video .
- Upload the video you wish to caption or subtitle.
- You can use one of the platform’s professionally designed video templates or premium clips to construct a new film from the ground up.
- To add a caption to your video, after uploading it in Promo’s video editor, click the circular pink plus sign to the left of the timeline. Choose “Add Caption” from the dropdown menu.
- After you’ve added and positioned, and designed your subtitles with beautiful text and colors, click Save & Preview to view your creation and publish or download it.
Conclusion
If you need subtitles for your videos, it is important to find the best subtitle maker online that will suit all of your needs. Whether you are looking for a free option or want something with more customization, there are plenty of options available online. Check out our list, and make sure to choose one that suits what you need!
Also read:
- Updated How to Edit Videos Shot by Sony Digital Camcorder for 2024
- Updated From the Heart Tips and Tricks for Making a Meaningful Valentines Day Video for 2024
- Updated In 2024, Free and Fabulous The 5 Best Online Tone Generators Out There
- Updated FCPX Skin Retouching A Plugin-Free Guide to Flawless Complexions for 2024
- Updated Top Pick Videopad Video Editor Review and Buying Guide
- New Windows Movie Making Made Easy Top 7 Editor Options for 2024
- Updated In 2024, From Footage to Film Mastering the Art of Cinematic Video Editing
- Updated 2024 Approved The Ultimate Videopad Review Features, Pricing, and Alternatives
- New 2024 Approved Maximizing Mobile Engagement Best Practices for Vertical Content
- Updated The Ultimate List of Free Video Trimmers for Windows 10 for 2024
- Updated Create Breathtaking Videos Top 1080P Video Editing Software for Beginners & Pros for 2024
- New 2024 Approved Top Tips From the Most Popular OGG Converters
- Updated Free Video Rotation Made Easy Top 10 Tools and Software for 2024
- In 2024, Make a Lasting Impression 5 Leading Photo Slideshow Software
- Updated 2024 Approved Bring Your Canon Videos to Life Top Editing Software and Tips
- Updated The Best of the Best Top Premiere Pro Transition Effects for 2024
- New 2024 Approved Video Invitation Software for iPhone and Android A Comprehensive Guide
- In 2024, Mastering Video Editing A Guide for Sony Camcorder Footage
- New 2024 Approved 6 Best Explainer Video Software You Should Try
- New In 2024, 5 Rules to Follow when Choose Video to Audio Converter App
- Updated In 2024, Top 10 Best Cartoon Video Maker Apps on Android and iPhone
- New The Best Free AVI Video Rotators A Comprehensive Review
- New In 2024, Expert-Approved Free FLV Video Editing Solutions
- Updated 2024 Approved Filmora Watermark Removal Free and Paid Methods
- Updated The Art of Professional Video Production A Beginners Guide to Success for 2024
- New In 2024, Mac Video Editing Discover the Best Options Beyond VSDC
- In 2024, Maximize Your Music Library Tips and Reviews for YouTube to MP3 Conversion
- Updated The Ultimate Guide to Free Commercial-Use Photos for 2024
- 2024 Approved Mastering XML Files in FCPX The Ultimate Guide
- Updated 2024 Approved Final Cut Pro Sound Design Discovering and Adding Free Sound Effects Like a Pro
- Updated Get Talking The Best Free Mac Speech Recognition Apps with No Strings Attached for 2024
- New Unleash Your Creativity A Complete Guide to Windows Movie Maker Download
- Maximize Your Edit 10 Best Free FCPX Plugins for 2024
- Vintage Video Made Easy Best VHS Apps for iPhone and Android for 2024
- Updated In 2024, Free Animation Software for Windows and Mac Our Top Picks
- Updated In 2024, Apples Finest Video Editing Software for Creative Pros
- New In 2024, How to Choose the Right YouTube Video Converter for MP4
- New 2024 Approved Discover the Power of Wax A Free Video Editor for Creators
- Updated In 2024, Top 16 Best Free Movie Makers Easy to Use
- Updated Make Your Own Lyric Videos Top Online Tools
- In 2024, The Top Free DVD Player Downloads for Windows 10
- New 2024 Approved The Ultimate Guide to Slow Motion Video Editing Top 10 Tools
- In 2024, The Ultimate Guide to Free Video FX Apps for iOS and Android
- In 2024, Unleash Your Creativity Top Animation Makers for All Experience Levels
- Updated In 2024, A Complete Guide About WAV Converter! Lets Dive Into Detailed Facts and Benefits of WAV Audio Format
- 2024 Approved Top 10 Free Video Stabilization Tools Online for Smooth Footage
- New In 2024, The Ultimate Guide to Trimming Videos Online with Kapwing
- Updated In 2024, The Most Popular Android Apps You Need to Try
- Updated 2024 Approved AVS Video Editor A Review of Its Performance and Capabilities
- New Unleash the Power of Countdown Timers in Final Cut Pro X for 2024
- In 2024, 3 Easy Ways to Factory Reset a Locked Apple iPhone 15 Plus Without iTunes
- In 2024, 3 Effective Ways to Unlock iCloud Account Without Password From Apple iPhone 11 Pro Max
- Undelete lost contacts from Honor Play 8T.
- How to Mirror Your Infinix Note 30 VIP Screen to PC with Chromecast | Dr.fone
- In 2024, How to use Snapchat Location Spoofer to Protect Your Privacy On Vivo V27? | Dr.fone
- 3 Solutions to Hard Reset Realme C33 2023 Phone Using PC | Dr.fone
- How to Change Huawei Nova Y71 Location on Skout | Dr.fone
- Updated Best Zero-Cost FLV Video Editors You Need for 2024
- How to Fix It Xiaomi Redmi K70 Wont Turn On | Dr.fone
- Will the iPogo Get You Banned and How to Solve It On Meizu 21 Pro | Dr.fone
- In 2024, A Quick Guide to Samsung Galaxy A34 5G FRP Bypass Instantly
- In 2024, 3 Effective Ways to Bypass Activation Lock on Apple iPhone 6
- How to Screen Share on Apple iPhone 15 Pro? | Dr.fone
- Updated Are You the One Who Is Confused About What to Opt Between Camtasia vs Captivate? No More Confusion! Here We Are Going to Reveal the Answer to Camtasia vs Captivate Which Is Better? Learn More
- What You Should Know About Speech-to-Text Technology
- Updated In 2024, Ratio Mastery How to Calculate Pixels Like a Pro
- How to Unlock Samsung Galaxy A54 5G PIN Code/Pattern Lock/Password
- Easy steps to recover deleted data from Realme GT Neo 5 SE
- In 2024, Best Infinix Hot 40 Pro Pattern Lock Removal Tools Remove Android Pattern Lock Without Losing Data
- Step-by-Step Tutorial How To Bypass Oppo A1x 5G FRP
- Updated In 2024, The Only Guide Youll Need to Learn About GIF Video Downloader
- Spotify Keeps Crashing A Complete List of Fixes You Can Use on Motorola Defy 2 | Dr.fone
- Updated Get Crystal-Clear Videos Top Picks for Resolution Enhancement Software
- 2024 Approved Dead Simple Guide to Create New and Exciting Blackboard Animation
- In 2024, Fixing Foneazy MockGo Not Working On Samsung Galaxy S24+ | Dr.fone
- In 2024, How Can Infinix Note 30 VIPMirror Share to PC? | Dr.fone
- 10 Fake GPS Location Apps on Android Of your Poco X6 | Dr.fone
- Complete Guide to Hard Reset Your Realme 11 5G | Dr.fone
- Android Call History Recovery - recover deleted call logs from Honor Play 7T
- How To Transfer Data From iPhone 15 To Other iPhone 13 Pro devices? | Dr.fone
- Title: New In 2024, Unleashing the Power of Color in Final Cut Pro
- Author: MdadeLe
- Created at : 2024-04-28 15:03:57
- Updated at : 2024-04-29 15:03:57
- Link: https://smart-video-editing.techidaily.com/new-in-2024-unleashing-the-power-of-color-in-final-cut-pro/
- License: This work is licensed under CC BY-NC-SA 4.0.
