:max_bytes(150000):strip_icc():format(webp)/GettyImages-753288077-5bb0f9b2cff47e00261aa8fc.jpg)
New In 2024, Free Video Looping Software Top 10 Picks
Free Video Looping Software: Top 10 Picks
Top 10 Free Online Video Loopers 2024
Ollie Mattison
Mar 27, 2024• Proven solutions
If you find a particular section of a video or an entire clip quite interesting and wish that you, your friends, or the target audience on your social networking account should also view that interesting part, again and again, it would be a good idea to play the footage in repeat mode. This is where the loopers come into play as they allow you to configure the video loop multiple times.
Therefore, below is a list of free video looper web solutions that, as per their policies, allow you to set the segment of footage to play repeatedly.
Top 10 Free Online Video Loopers
Note: Although the following list introduces the 10 best video looper online apps, each of them may vary in their nature, level of granularity they offer while setting up the loops, or the size of video they can accept in a single session.
1. Filmora Video Editor - [Free Trial, for Windows or Mac Computer]
If you need more powerful video looper, online tools may be not the first choice. You can have a try Filmora video editor. Filmora offers a unique balance between beginner-friendly video editing software and a feature-rich tool that even experts can edit on. This means anyone can use it to create any video editing project they like.
Making a loop video with Filmora is as easy as spreading warm butter on toast. Just open the program, click on New Project, and follow these simple steps to loop video on Filmora .
2. Clideo Loop Video
Loop Video is not the only feature that Clideo offers, and the web portal can be used as a beginners’ gear to form a strong foundation for anyone who is planning to get a career in the post-production industry. When talking about the solution’s video looper online feature, the interface is well-balanced, with no distracting adverts to hinder your operations.
How to loop video with Clideo?
- Launch any web browser and go to https://clideo.com/editor/loop-video
- Use your preferred method to upload the source video
- Choose an output format from the Format menu at the bottom-left corner of the new page that appears
- From the Loop this clip section on the right, choose how many times you want the video to loop
- Click Loop from the bottom-right corner of the page
- Wait while Clideo prepares your video
- Click Download (or choose your preferred download location) from the next page to obtain the clip once the process completes
Pros
- Lets you produce a looped video an unlimited number of times (at the cost of converting the clip to GIF format)
- Lets you edit the videos post-processing for better output
Cons
- Requires a subscription plan to be purchased to remove the watermark from the output videos
3. Kapwing Loop Video
Kapwing is another multipurpose multimedia and post-production solution that is also a free video looper with a couple of lucrative features. The web solution has a built-in video maker, meme maker, video resizer, GIF editor to add audio, video trimmer, and much more. The portal is trustworthy and is used by giants like Spotify, Amazon, Sony, etc.
How to use Kapwing to loop video?
- Use your preferred web browser to go to https://www.kapwing.com/tools/loop-video
- Click Upload to upload or paste the YouTube URL of the source clip in the given field
- Click Trim Video from the top-left section of the right window (Optional)
- Choose the number of times the video should loop from the Loop this clip section present at the top of the left pane
- Click CREATE from the bottom-left corner
- Edit (optional) and/or download the processed clip from the next page
Pros
- Generates a unique URL that can be used to share with people or on social networking sites
- Requires no registration as long as you are OK with the watermark. Registration is free
Cons
- Free users can upload videos of as long as up to 7 minutes with a file size of up to 250MB in a single session
4. FileConverto Online Video Loop
Offering a plethora of video and audio tools like compressor, joiner, trimmer, and much more, FileConverto is also an MP4 looper that can accept your files from your PC, and can easily loop them multiple times as needed. All the other tools, including the video loop offered with the online solution, are free to use.
How to loop video with FileConverto?
- Go to https://www.fileconverto.com/loop-repeat-video/ using your favorite web browser
- Click Browse on the webpage and upload the source video file
- From the available drop-down list, choose the number of times you want your video to loop
- Click Submit Now
- Wait while the portal processes the video
- Click Download File to save the output clip to your PC
Pros
- Requires no registration or paid subscription plan whatsoever
- The entire process can be completed in 3 simple steps
Cons
- Doesn’t allow to trim the videos or choose their output format
5. Animaker
A decent and feature-equipped tool that not only allows you to loop your videos, it also enables you to add text effects, animated characters, background images and music, objects, and many other such elements to the clips in order to make them more interesting and engaging for the target audience.
How to loop video with Animaker Online?
- Go to https://app.animaker.com/dashboard using any web browser of your choice
- Sign up for an account using your preferred method
- From the left pane, go to Create > Create a video > Blank Page
- Click Upload from the lower section of the navigation pane on the left
- Upload a clip from your PC
- Drag the clip from the Media bin to the Workspace at the center of the page
- Click the Duplicate button present at the bottom of the clip’s thumbnail in the right panel to add a video loop.
Note: You can click the Duplicate button as many times as you want the clip to loop for
- Click Publish from the top-right corner
- Click Download to download the processed video to your PC. Alternatively, choose any other option to share the clip on your preferred social media platform
Pros
- Has plenty of robust and efficient tools to granularly prepare your videos
- Allows you to add multiple elements to the clips before enabling loops
Cons
- A paid subscription is required to remove the watermark
6. Rocketium
A web solution for both indie professionals and teams, Rocketium still allows you to loop your footage for free. All you need to do is, upload the video to the portal, make the required adjustments as per your preferences, and download the processed clip to your PC without any hindrance.
Process of looping video with Rocketium
- Go to https://rocketium.com/is/video-looper/ on your web browser
- Click Upload a file
- Select and upload a clip from your PC
- Choose the number of loops for your video from the right section
- Click Loop Video
- Click Download to save the processed output on your computer
Pros
- Allows video loop at absolutely no cost
- The entire process can be completed in 3 simple steps
Cons
- Registration is required to edit the videos
7. LoopTube
LoopTube is an online YouTube video loop portal that lets you repeat the entire clip or its particular section an unlimited number of times. The best thing is, that the landing page itself has all the features and options, and the entire interface is extremely easy to use, even by those who have least or absolutely no knowledge about video editing or looping.
How to use LoopTube to loop video?
- Launch a web browser on your computer and go to https://looptube.io/
- Paste the URL of the YouTube video in the available field at the top
- Click the Search button to allow LoopTube to search and access the clip
- Use the left and right handles from below the player window to select the segment in the video you want to loop for an unlimited number of times
Pros
- Absolutely free to use
- Lets you select a segment of the video for infinite loop
Cons
- Doesn’t allow you to download or share the output video
8. VEED.IO
A complete online post-production tool for both beginners and professionals, VEED.IO is enriched with plenty of tools to make your source clips look much more engaging, interesting, and informative. While the subscriptions start from $0.00 USD to $24.00 USD per month, the videos can be uploaded, looped, and downloaded for free.
How to loop video with Veed.io?
- Make sure to download the video you want to loop to your local hard drive
- Use a web browser to go to https://www.veed.io/tools/video-looper
- Click Get Started Now
- Use your preferred method to upload the source video
- Use the Playhead (Skimmer) in the Timeline at the bottom to go to a frame, and click Split to split the clip as needed
- Select the unwanted segment and press Delete on your keyboard to remove
- Drag the remaining part to place it in your preferred position
- Click Add Video to add the same clip to the portal again
- Repeat the above step as many times as you want the clip to loop for
- Click Export from the top-right corner, and wait while VEED.IO renders the uploaded video(s)
- Use your preferred method to download or share the output footage when done
Pros
- Free to use
- Has several options to edit and decorate your footage before looping
Cons
- A paid subscription is needed to remove the watermark
9. WoFox Loop Video Tool
A free solution for video loop and making other adjustments to your source footage, WoFox is a decent web app for graphic designing, animated designs, photo collages, logo creation, and much more. The tool can also create animated lyrics and video songs that could be used to impart information or practice singing.
How to loop video with WoFox?
- On your Internet browser, go to https://www.wofox.com/video-editing-tools/loop-video
- Click Upload and select the number of loops from the Loop video section in the left pane
- Click Download from the top-right corner of the page
Pros
- Absolutely free to use
- Is equipped with several other video editing tools
Cons
- Subscription plans are hefty if you ever plan to use the tool for business purposes
- At the time of this writing, the tool doesn’t work with Mozilla Firefox
10. Video Looper Chrome Extension
A free tool that works with the Google Chrome web browser, Video Looper is a Chrome Extension that can be added and enabled in order to loop the videos that you play on YouTube. Post adding, the extension automatically gets enabled as soon as it detects an eligible YouTube video on Chrome. Once enabled, you can even detach the panel to use it independently.
How to use the Chrome extension to loop video?
- Launch Google Chrome and go to https://chrome.google.com/webstore/detail/video-looper/cakhljgchfghghfapljifddkaomfijcn
- Click Add to Chrome, and then click Add Extension when the confirmation box pops up
- Close and then reopen Google Chrome
- Go to the YouTube’s clip URL that you want to video loop
- Click the Video Looper icon from the top-right corner of the browser
- Click Create Repeat
- Enter a value (the number of times you want to loop the video) in the Repeat Times field
- Optionally enter the relevant values in the Start Time and End Time fields to trim the footage
- Click Create
- Click Start & Play on the next box that appears to play the YouTube video for the number of times you specified
Pros
- Free to use
- Can create an unlimited number of presets to play the videos in loops
Cons
- Doesn’t allow you to download the videos
Summary
Depending on your budget, frequency of video loop requirements, and the level of details you need while preparing a full-fledged video with repetitions, you can choose any of the tools explained above. However, if you need a comparatively better solution, Wondershare UniConverter would be your best bet as it is not merely a free video looper, it also offers several other features to get a complete output with quite granular edits.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
If you find a particular section of a video or an entire clip quite interesting and wish that you, your friends, or the target audience on your social networking account should also view that interesting part, again and again, it would be a good idea to play the footage in repeat mode. This is where the loopers come into play as they allow you to configure the video loop multiple times.
Therefore, below is a list of free video looper web solutions that, as per their policies, allow you to set the segment of footage to play repeatedly.
Top 10 Free Online Video Loopers
Note: Although the following list introduces the 10 best video looper online apps, each of them may vary in their nature, level of granularity they offer while setting up the loops, or the size of video they can accept in a single session.
1. Filmora Video Editor - [Free Trial, for Windows or Mac Computer]
If you need more powerful video looper, online tools may be not the first choice. You can have a try Filmora video editor. Filmora offers a unique balance between beginner-friendly video editing software and a feature-rich tool that even experts can edit on. This means anyone can use it to create any video editing project they like.
Making a loop video with Filmora is as easy as spreading warm butter on toast. Just open the program, click on New Project, and follow these simple steps to loop video on Filmora .
2. Clideo Loop Video
Loop Video is not the only feature that Clideo offers, and the web portal can be used as a beginners’ gear to form a strong foundation for anyone who is planning to get a career in the post-production industry. When talking about the solution’s video looper online feature, the interface is well-balanced, with no distracting adverts to hinder your operations.
How to loop video with Clideo?
- Launch any web browser and go to https://clideo.com/editor/loop-video
- Use your preferred method to upload the source video
- Choose an output format from the Format menu at the bottom-left corner of the new page that appears
- From the Loop this clip section on the right, choose how many times you want the video to loop
- Click Loop from the bottom-right corner of the page
- Wait while Clideo prepares your video
- Click Download (or choose your preferred download location) from the next page to obtain the clip once the process completes
Pros
- Lets you produce a looped video an unlimited number of times (at the cost of converting the clip to GIF format)
- Lets you edit the videos post-processing for better output
Cons
- Requires a subscription plan to be purchased to remove the watermark from the output videos
3. Kapwing Loop Video
Kapwing is another multipurpose multimedia and post-production solution that is also a free video looper with a couple of lucrative features. The web solution has a built-in video maker, meme maker, video resizer, GIF editor to add audio, video trimmer, and much more. The portal is trustworthy and is used by giants like Spotify, Amazon, Sony, etc.
How to use Kapwing to loop video?
- Use your preferred web browser to go to https://www.kapwing.com/tools/loop-video
- Click Upload to upload or paste the YouTube URL of the source clip in the given field
- Click Trim Video from the top-left section of the right window (Optional)
- Choose the number of times the video should loop from the Loop this clip section present at the top of the left pane
- Click CREATE from the bottom-left corner
- Edit (optional) and/or download the processed clip from the next page
Pros
- Generates a unique URL that can be used to share with people or on social networking sites
- Requires no registration as long as you are OK with the watermark. Registration is free
Cons
- Free users can upload videos of as long as up to 7 minutes with a file size of up to 250MB in a single session
4. FileConverto Online Video Loop
Offering a plethora of video and audio tools like compressor, joiner, trimmer, and much more, FileConverto is also an MP4 looper that can accept your files from your PC, and can easily loop them multiple times as needed. All the other tools, including the video loop offered with the online solution, are free to use.
How to loop video with FileConverto?
- Go to https://www.fileconverto.com/loop-repeat-video/ using your favorite web browser
- Click Browse on the webpage and upload the source video file
- From the available drop-down list, choose the number of times you want your video to loop
- Click Submit Now
- Wait while the portal processes the video
- Click Download File to save the output clip to your PC
Pros
- Requires no registration or paid subscription plan whatsoever
- The entire process can be completed in 3 simple steps
Cons
- Doesn’t allow to trim the videos or choose their output format
5. Animaker
A decent and feature-equipped tool that not only allows you to loop your videos, it also enables you to add text effects, animated characters, background images and music, objects, and many other such elements to the clips in order to make them more interesting and engaging for the target audience.
How to loop video with Animaker Online?
- Go to https://app.animaker.com/dashboard using any web browser of your choice
- Sign up for an account using your preferred method
- From the left pane, go to Create > Create a video > Blank Page
- Click Upload from the lower section of the navigation pane on the left
- Upload a clip from your PC
- Drag the clip from the Media bin to the Workspace at the center of the page
- Click the Duplicate button present at the bottom of the clip’s thumbnail in the right panel to add a video loop.
Note: You can click the Duplicate button as many times as you want the clip to loop for
- Click Publish from the top-right corner
- Click Download to download the processed video to your PC. Alternatively, choose any other option to share the clip on your preferred social media platform
Pros
- Has plenty of robust and efficient tools to granularly prepare your videos
- Allows you to add multiple elements to the clips before enabling loops
Cons
- A paid subscription is required to remove the watermark
6. Rocketium
A web solution for both indie professionals and teams, Rocketium still allows you to loop your footage for free. All you need to do is, upload the video to the portal, make the required adjustments as per your preferences, and download the processed clip to your PC without any hindrance.
Process of looping video with Rocketium
- Go to https://rocketium.com/is/video-looper/ on your web browser
- Click Upload a file
- Select and upload a clip from your PC
- Choose the number of loops for your video from the right section
- Click Loop Video
- Click Download to save the processed output on your computer
Pros
- Allows video loop at absolutely no cost
- The entire process can be completed in 3 simple steps
Cons
- Registration is required to edit the videos
7. LoopTube
LoopTube is an online YouTube video loop portal that lets you repeat the entire clip or its particular section an unlimited number of times. The best thing is, that the landing page itself has all the features and options, and the entire interface is extremely easy to use, even by those who have least or absolutely no knowledge about video editing or looping.
How to use LoopTube to loop video?
- Launch a web browser on your computer and go to https://looptube.io/
- Paste the URL of the YouTube video in the available field at the top
- Click the Search button to allow LoopTube to search and access the clip
- Use the left and right handles from below the player window to select the segment in the video you want to loop for an unlimited number of times
Pros
- Absolutely free to use
- Lets you select a segment of the video for infinite loop
Cons
- Doesn’t allow you to download or share the output video
8. VEED.IO
A complete online post-production tool for both beginners and professionals, VEED.IO is enriched with plenty of tools to make your source clips look much more engaging, interesting, and informative. While the subscriptions start from $0.00 USD to $24.00 USD per month, the videos can be uploaded, looped, and downloaded for free.
How to loop video with Veed.io?
- Make sure to download the video you want to loop to your local hard drive
- Use a web browser to go to https://www.veed.io/tools/video-looper
- Click Get Started Now
- Use your preferred method to upload the source video
- Use the Playhead (Skimmer) in the Timeline at the bottom to go to a frame, and click Split to split the clip as needed
- Select the unwanted segment and press Delete on your keyboard to remove
- Drag the remaining part to place it in your preferred position
- Click Add Video to add the same clip to the portal again
- Repeat the above step as many times as you want the clip to loop for
- Click Export from the top-right corner, and wait while VEED.IO renders the uploaded video(s)
- Use your preferred method to download or share the output footage when done
Pros
- Free to use
- Has several options to edit and decorate your footage before looping
Cons
- A paid subscription is needed to remove the watermark
9. WoFox Loop Video Tool
A free solution for video loop and making other adjustments to your source footage, WoFox is a decent web app for graphic designing, animated designs, photo collages, logo creation, and much more. The tool can also create animated lyrics and video songs that could be used to impart information or practice singing.
How to loop video with WoFox?
- On your Internet browser, go to https://www.wofox.com/video-editing-tools/loop-video
- Click Upload and select the number of loops from the Loop video section in the left pane
- Click Download from the top-right corner of the page
Pros
- Absolutely free to use
- Is equipped with several other video editing tools
Cons
- Subscription plans are hefty if you ever plan to use the tool for business purposes
- At the time of this writing, the tool doesn’t work with Mozilla Firefox
10. Video Looper Chrome Extension
A free tool that works with the Google Chrome web browser, Video Looper is a Chrome Extension that can be added and enabled in order to loop the videos that you play on YouTube. Post adding, the extension automatically gets enabled as soon as it detects an eligible YouTube video on Chrome. Once enabled, you can even detach the panel to use it independently.
How to use the Chrome extension to loop video?
- Launch Google Chrome and go to https://chrome.google.com/webstore/detail/video-looper/cakhljgchfghghfapljifddkaomfijcn
- Click Add to Chrome, and then click Add Extension when the confirmation box pops up
- Close and then reopen Google Chrome
- Go to the YouTube’s clip URL that you want to video loop
- Click the Video Looper icon from the top-right corner of the browser
- Click Create Repeat
- Enter a value (the number of times you want to loop the video) in the Repeat Times field
- Optionally enter the relevant values in the Start Time and End Time fields to trim the footage
- Click Create
- Click Start & Play on the next box that appears to play the YouTube video for the number of times you specified
Pros
- Free to use
- Can create an unlimited number of presets to play the videos in loops
Cons
- Doesn’t allow you to download the videos
Summary
Depending on your budget, frequency of video loop requirements, and the level of details you need while preparing a full-fledged video with repetitions, you can choose any of the tools explained above. However, if you need a comparatively better solution, Wondershare UniConverter would be your best bet as it is not merely a free video looper, it also offers several other features to get a complete output with quite granular edits.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
If you find a particular section of a video or an entire clip quite interesting and wish that you, your friends, or the target audience on your social networking account should also view that interesting part, again and again, it would be a good idea to play the footage in repeat mode. This is where the loopers come into play as they allow you to configure the video loop multiple times.
Therefore, below is a list of free video looper web solutions that, as per their policies, allow you to set the segment of footage to play repeatedly.
Top 10 Free Online Video Loopers
Note: Although the following list introduces the 10 best video looper online apps, each of them may vary in their nature, level of granularity they offer while setting up the loops, or the size of video they can accept in a single session.
1. Filmora Video Editor - [Free Trial, for Windows or Mac Computer]
If you need more powerful video looper, online tools may be not the first choice. You can have a try Filmora video editor. Filmora offers a unique balance between beginner-friendly video editing software and a feature-rich tool that even experts can edit on. This means anyone can use it to create any video editing project they like.
Making a loop video with Filmora is as easy as spreading warm butter on toast. Just open the program, click on New Project, and follow these simple steps to loop video on Filmora .
2. Clideo Loop Video
Loop Video is not the only feature that Clideo offers, and the web portal can be used as a beginners’ gear to form a strong foundation for anyone who is planning to get a career in the post-production industry. When talking about the solution’s video looper online feature, the interface is well-balanced, with no distracting adverts to hinder your operations.
How to loop video with Clideo?
- Launch any web browser and go to https://clideo.com/editor/loop-video
- Use your preferred method to upload the source video
- Choose an output format from the Format menu at the bottom-left corner of the new page that appears
- From the Loop this clip section on the right, choose how many times you want the video to loop
- Click Loop from the bottom-right corner of the page
- Wait while Clideo prepares your video
- Click Download (or choose your preferred download location) from the next page to obtain the clip once the process completes
Pros
- Lets you produce a looped video an unlimited number of times (at the cost of converting the clip to GIF format)
- Lets you edit the videos post-processing for better output
Cons
- Requires a subscription plan to be purchased to remove the watermark from the output videos
3. Kapwing Loop Video
Kapwing is another multipurpose multimedia and post-production solution that is also a free video looper with a couple of lucrative features. The web solution has a built-in video maker, meme maker, video resizer, GIF editor to add audio, video trimmer, and much more. The portal is trustworthy and is used by giants like Spotify, Amazon, Sony, etc.
How to use Kapwing to loop video?
- Use your preferred web browser to go to https://www.kapwing.com/tools/loop-video
- Click Upload to upload or paste the YouTube URL of the source clip in the given field
- Click Trim Video from the top-left section of the right window (Optional)
- Choose the number of times the video should loop from the Loop this clip section present at the top of the left pane
- Click CREATE from the bottom-left corner
- Edit (optional) and/or download the processed clip from the next page
Pros
- Generates a unique URL that can be used to share with people or on social networking sites
- Requires no registration as long as you are OK with the watermark. Registration is free
Cons
- Free users can upload videos of as long as up to 7 minutes with a file size of up to 250MB in a single session
4. FileConverto Online Video Loop
Offering a plethora of video and audio tools like compressor, joiner, trimmer, and much more, FileConverto is also an MP4 looper that can accept your files from your PC, and can easily loop them multiple times as needed. All the other tools, including the video loop offered with the online solution, are free to use.
How to loop video with FileConverto?
- Go to https://www.fileconverto.com/loop-repeat-video/ using your favorite web browser
- Click Browse on the webpage and upload the source video file
- From the available drop-down list, choose the number of times you want your video to loop
- Click Submit Now
- Wait while the portal processes the video
- Click Download File to save the output clip to your PC
Pros
- Requires no registration or paid subscription plan whatsoever
- The entire process can be completed in 3 simple steps
Cons
- Doesn’t allow to trim the videos or choose their output format
5. Animaker
A decent and feature-equipped tool that not only allows you to loop your videos, it also enables you to add text effects, animated characters, background images and music, objects, and many other such elements to the clips in order to make them more interesting and engaging for the target audience.
How to loop video with Animaker Online?
- Go to https://app.animaker.com/dashboard using any web browser of your choice
- Sign up for an account using your preferred method
- From the left pane, go to Create > Create a video > Blank Page
- Click Upload from the lower section of the navigation pane on the left
- Upload a clip from your PC
- Drag the clip from the Media bin to the Workspace at the center of the page
- Click the Duplicate button present at the bottom of the clip’s thumbnail in the right panel to add a video loop.
Note: You can click the Duplicate button as many times as you want the clip to loop for
- Click Publish from the top-right corner
- Click Download to download the processed video to your PC. Alternatively, choose any other option to share the clip on your preferred social media platform
Pros
- Has plenty of robust and efficient tools to granularly prepare your videos
- Allows you to add multiple elements to the clips before enabling loops
Cons
- A paid subscription is required to remove the watermark
6. Rocketium
A web solution for both indie professionals and teams, Rocketium still allows you to loop your footage for free. All you need to do is, upload the video to the portal, make the required adjustments as per your preferences, and download the processed clip to your PC without any hindrance.
Process of looping video with Rocketium
- Go to https://rocketium.com/is/video-looper/ on your web browser
- Click Upload a file
- Select and upload a clip from your PC
- Choose the number of loops for your video from the right section
- Click Loop Video
- Click Download to save the processed output on your computer
Pros
- Allows video loop at absolutely no cost
- The entire process can be completed in 3 simple steps
Cons
- Registration is required to edit the videos
7. LoopTube
LoopTube is an online YouTube video loop portal that lets you repeat the entire clip or its particular section an unlimited number of times. The best thing is, that the landing page itself has all the features and options, and the entire interface is extremely easy to use, even by those who have least or absolutely no knowledge about video editing or looping.
How to use LoopTube to loop video?
- Launch a web browser on your computer and go to https://looptube.io/
- Paste the URL of the YouTube video in the available field at the top
- Click the Search button to allow LoopTube to search and access the clip
- Use the left and right handles from below the player window to select the segment in the video you want to loop for an unlimited number of times
Pros
- Absolutely free to use
- Lets you select a segment of the video for infinite loop
Cons
- Doesn’t allow you to download or share the output video
8. VEED.IO
A complete online post-production tool for both beginners and professionals, VEED.IO is enriched with plenty of tools to make your source clips look much more engaging, interesting, and informative. While the subscriptions start from $0.00 USD to $24.00 USD per month, the videos can be uploaded, looped, and downloaded for free.
How to loop video with Veed.io?
- Make sure to download the video you want to loop to your local hard drive
- Use a web browser to go to https://www.veed.io/tools/video-looper
- Click Get Started Now
- Use your preferred method to upload the source video
- Use the Playhead (Skimmer) in the Timeline at the bottom to go to a frame, and click Split to split the clip as needed
- Select the unwanted segment and press Delete on your keyboard to remove
- Drag the remaining part to place it in your preferred position
- Click Add Video to add the same clip to the portal again
- Repeat the above step as many times as you want the clip to loop for
- Click Export from the top-right corner, and wait while VEED.IO renders the uploaded video(s)
- Use your preferred method to download or share the output footage when done
Pros
- Free to use
- Has several options to edit and decorate your footage before looping
Cons
- A paid subscription is needed to remove the watermark
9. WoFox Loop Video Tool
A free solution for video loop and making other adjustments to your source footage, WoFox is a decent web app for graphic designing, animated designs, photo collages, logo creation, and much more. The tool can also create animated lyrics and video songs that could be used to impart information or practice singing.
How to loop video with WoFox?
- On your Internet browser, go to https://www.wofox.com/video-editing-tools/loop-video
- Click Upload and select the number of loops from the Loop video section in the left pane
- Click Download from the top-right corner of the page
Pros
- Absolutely free to use
- Is equipped with several other video editing tools
Cons
- Subscription plans are hefty if you ever plan to use the tool for business purposes
- At the time of this writing, the tool doesn’t work with Mozilla Firefox
10. Video Looper Chrome Extension
A free tool that works with the Google Chrome web browser, Video Looper is a Chrome Extension that can be added and enabled in order to loop the videos that you play on YouTube. Post adding, the extension automatically gets enabled as soon as it detects an eligible YouTube video on Chrome. Once enabled, you can even detach the panel to use it independently.
How to use the Chrome extension to loop video?
- Launch Google Chrome and go to https://chrome.google.com/webstore/detail/video-looper/cakhljgchfghghfapljifddkaomfijcn
- Click Add to Chrome, and then click Add Extension when the confirmation box pops up
- Close and then reopen Google Chrome
- Go to the YouTube’s clip URL that you want to video loop
- Click the Video Looper icon from the top-right corner of the browser
- Click Create Repeat
- Enter a value (the number of times you want to loop the video) in the Repeat Times field
- Optionally enter the relevant values in the Start Time and End Time fields to trim the footage
- Click Create
- Click Start & Play on the next box that appears to play the YouTube video for the number of times you specified
Pros
- Free to use
- Can create an unlimited number of presets to play the videos in loops
Cons
- Doesn’t allow you to download the videos
Summary
Depending on your budget, frequency of video loop requirements, and the level of details you need while preparing a full-fledged video with repetitions, you can choose any of the tools explained above. However, if you need a comparatively better solution, Wondershare UniConverter would be your best bet as it is not merely a free video looper, it also offers several other features to get a complete output with quite granular edits.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
If you find a particular section of a video or an entire clip quite interesting and wish that you, your friends, or the target audience on your social networking account should also view that interesting part, again and again, it would be a good idea to play the footage in repeat mode. This is where the loopers come into play as they allow you to configure the video loop multiple times.
Therefore, below is a list of free video looper web solutions that, as per their policies, allow you to set the segment of footage to play repeatedly.
Top 10 Free Online Video Loopers
Note: Although the following list introduces the 10 best video looper online apps, each of them may vary in their nature, level of granularity they offer while setting up the loops, or the size of video they can accept in a single session.
1. Filmora Video Editor - [Free Trial, for Windows or Mac Computer]
If you need more powerful video looper, online tools may be not the first choice. You can have a try Filmora video editor. Filmora offers a unique balance between beginner-friendly video editing software and a feature-rich tool that even experts can edit on. This means anyone can use it to create any video editing project they like.
Making a loop video with Filmora is as easy as spreading warm butter on toast. Just open the program, click on New Project, and follow these simple steps to loop video on Filmora .
2. Clideo Loop Video
Loop Video is not the only feature that Clideo offers, and the web portal can be used as a beginners’ gear to form a strong foundation for anyone who is planning to get a career in the post-production industry. When talking about the solution’s video looper online feature, the interface is well-balanced, with no distracting adverts to hinder your operations.
How to loop video with Clideo?
- Launch any web browser and go to https://clideo.com/editor/loop-video
- Use your preferred method to upload the source video
- Choose an output format from the Format menu at the bottom-left corner of the new page that appears
- From the Loop this clip section on the right, choose how many times you want the video to loop
- Click Loop from the bottom-right corner of the page
- Wait while Clideo prepares your video
- Click Download (or choose your preferred download location) from the next page to obtain the clip once the process completes
Pros
- Lets you produce a looped video an unlimited number of times (at the cost of converting the clip to GIF format)
- Lets you edit the videos post-processing for better output
Cons
- Requires a subscription plan to be purchased to remove the watermark from the output videos
3. Kapwing Loop Video
Kapwing is another multipurpose multimedia and post-production solution that is also a free video looper with a couple of lucrative features. The web solution has a built-in video maker, meme maker, video resizer, GIF editor to add audio, video trimmer, and much more. The portal is trustworthy and is used by giants like Spotify, Amazon, Sony, etc.
How to use Kapwing to loop video?
- Use your preferred web browser to go to https://www.kapwing.com/tools/loop-video
- Click Upload to upload or paste the YouTube URL of the source clip in the given field
- Click Trim Video from the top-left section of the right window (Optional)
- Choose the number of times the video should loop from the Loop this clip section present at the top of the left pane
- Click CREATE from the bottom-left corner
- Edit (optional) and/or download the processed clip from the next page
Pros
- Generates a unique URL that can be used to share with people or on social networking sites
- Requires no registration as long as you are OK with the watermark. Registration is free
Cons
- Free users can upload videos of as long as up to 7 minutes with a file size of up to 250MB in a single session
4. FileConverto Online Video Loop
Offering a plethora of video and audio tools like compressor, joiner, trimmer, and much more, FileConverto is also an MP4 looper that can accept your files from your PC, and can easily loop them multiple times as needed. All the other tools, including the video loop offered with the online solution, are free to use.
How to loop video with FileConverto?
- Go to https://www.fileconverto.com/loop-repeat-video/ using your favorite web browser
- Click Browse on the webpage and upload the source video file
- From the available drop-down list, choose the number of times you want your video to loop
- Click Submit Now
- Wait while the portal processes the video
- Click Download File to save the output clip to your PC
Pros
- Requires no registration or paid subscription plan whatsoever
- The entire process can be completed in 3 simple steps
Cons
- Doesn’t allow to trim the videos or choose their output format
5. Animaker
A decent and feature-equipped tool that not only allows you to loop your videos, it also enables you to add text effects, animated characters, background images and music, objects, and many other such elements to the clips in order to make them more interesting and engaging for the target audience.
How to loop video with Animaker Online?
- Go to https://app.animaker.com/dashboard using any web browser of your choice
- Sign up for an account using your preferred method
- From the left pane, go to Create > Create a video > Blank Page
- Click Upload from the lower section of the navigation pane on the left
- Upload a clip from your PC
- Drag the clip from the Media bin to the Workspace at the center of the page
- Click the Duplicate button present at the bottom of the clip’s thumbnail in the right panel to add a video loop.
Note: You can click the Duplicate button as many times as you want the clip to loop for
- Click Publish from the top-right corner
- Click Download to download the processed video to your PC. Alternatively, choose any other option to share the clip on your preferred social media platform
Pros
- Has plenty of robust and efficient tools to granularly prepare your videos
- Allows you to add multiple elements to the clips before enabling loops
Cons
- A paid subscription is required to remove the watermark
6. Rocketium
A web solution for both indie professionals and teams, Rocketium still allows you to loop your footage for free. All you need to do is, upload the video to the portal, make the required adjustments as per your preferences, and download the processed clip to your PC without any hindrance.
Process of looping video with Rocketium
- Go to https://rocketium.com/is/video-looper/ on your web browser
- Click Upload a file
- Select and upload a clip from your PC
- Choose the number of loops for your video from the right section
- Click Loop Video
- Click Download to save the processed output on your computer
Pros
- Allows video loop at absolutely no cost
- The entire process can be completed in 3 simple steps
Cons
- Registration is required to edit the videos
7. LoopTube
LoopTube is an online YouTube video loop portal that lets you repeat the entire clip or its particular section an unlimited number of times. The best thing is, that the landing page itself has all the features and options, and the entire interface is extremely easy to use, even by those who have least or absolutely no knowledge about video editing or looping.
How to use LoopTube to loop video?
- Launch a web browser on your computer and go to https://looptube.io/
- Paste the URL of the YouTube video in the available field at the top
- Click the Search button to allow LoopTube to search and access the clip
- Use the left and right handles from below the player window to select the segment in the video you want to loop for an unlimited number of times
Pros
- Absolutely free to use
- Lets you select a segment of the video for infinite loop
Cons
- Doesn’t allow you to download or share the output video
8. VEED.IO
A complete online post-production tool for both beginners and professionals, VEED.IO is enriched with plenty of tools to make your source clips look much more engaging, interesting, and informative. While the subscriptions start from $0.00 USD to $24.00 USD per month, the videos can be uploaded, looped, and downloaded for free.
How to loop video with Veed.io?
- Make sure to download the video you want to loop to your local hard drive
- Use a web browser to go to https://www.veed.io/tools/video-looper
- Click Get Started Now
- Use your preferred method to upload the source video
- Use the Playhead (Skimmer) in the Timeline at the bottom to go to a frame, and click Split to split the clip as needed
- Select the unwanted segment and press Delete on your keyboard to remove
- Drag the remaining part to place it in your preferred position
- Click Add Video to add the same clip to the portal again
- Repeat the above step as many times as you want the clip to loop for
- Click Export from the top-right corner, and wait while VEED.IO renders the uploaded video(s)
- Use your preferred method to download or share the output footage when done
Pros
- Free to use
- Has several options to edit and decorate your footage before looping
Cons
- A paid subscription is needed to remove the watermark
9. WoFox Loop Video Tool
A free solution for video loop and making other adjustments to your source footage, WoFox is a decent web app for graphic designing, animated designs, photo collages, logo creation, and much more. The tool can also create animated lyrics and video songs that could be used to impart information or practice singing.
How to loop video with WoFox?
- On your Internet browser, go to https://www.wofox.com/video-editing-tools/loop-video
- Click Upload and select the number of loops from the Loop video section in the left pane
- Click Download from the top-right corner of the page
Pros
- Absolutely free to use
- Is equipped with several other video editing tools
Cons
- Subscription plans are hefty if you ever plan to use the tool for business purposes
- At the time of this writing, the tool doesn’t work with Mozilla Firefox
10. Video Looper Chrome Extension
A free tool that works with the Google Chrome web browser, Video Looper is a Chrome Extension that can be added and enabled in order to loop the videos that you play on YouTube. Post adding, the extension automatically gets enabled as soon as it detects an eligible YouTube video on Chrome. Once enabled, you can even detach the panel to use it independently.
How to use the Chrome extension to loop video?
- Launch Google Chrome and go to https://chrome.google.com/webstore/detail/video-looper/cakhljgchfghghfapljifddkaomfijcn
- Click Add to Chrome, and then click Add Extension when the confirmation box pops up
- Close and then reopen Google Chrome
- Go to the YouTube’s clip URL that you want to video loop
- Click the Video Looper icon from the top-right corner of the browser
- Click Create Repeat
- Enter a value (the number of times you want to loop the video) in the Repeat Times field
- Optionally enter the relevant values in the Start Time and End Time fields to trim the footage
- Click Create
- Click Start & Play on the next box that appears to play the YouTube video for the number of times you specified
Pros
- Free to use
- Can create an unlimited number of presets to play the videos in loops
Cons
- Doesn’t allow you to download the videos
Summary
Depending on your budget, frequency of video loop requirements, and the level of details you need while preparing a full-fledged video with repetitions, you can choose any of the tools explained above. However, if you need a comparatively better solution, Wondershare UniConverter would be your best bet as it is not merely a free video looper, it also offers several other features to get a complete output with quite granular edits.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Best Video Editing Software for Mac
Best Video Editing Software for Mac in 2024
Larry Jordan
Mar 27, 2024• Proven solutions
Regardless of whether you’re an experienced content maker or simply a beginner to edit your videos, the right video editing software for your Mac can improve things significantly. It should assist you with doing everything you want when editing videos on Mac, from basic editing to advanced editing. It should take your videos to a higher level and make it stand apart from the group. So, we did some testing and have tracked down the best video editing software on Mac for you. Followings are our picks for you, you can choose the one suits you more.
Part1: Best Video Editor for Mac – Wondershare Filmora for Mac
Wondershare Filmora is a powerful video-editing software available for Windows and Mac users. Just like its intuitive interface, you can conduct video editing easily with only few clicks, your videos will become much more attractive. You can not only simply trim, crop, split and merge videos, but also utilizing motion tracking, key framing and color match and others advanced tools to make your video more attractive. There are also tons of video effects like AR stickers and AI portrait, filters, elements, and titles to personalize you video. What’s more, you can use almost all features of it via free version. Try it now to edit your video easily.
Main Features
- Rich export options: support all the popular video formats, allows burn to video and can share on YouTube directly
- Basic video editing: Quickly trim, cut, split, crop and merge videos
- Advanced video editing: motion tracking, key framing, audio ducking, green screen and more
- Amazing effects: cloud-based library with tons of effects, filters, transition and titles
- Rich export options: support all the popular video formats, allows burn to video and can share on YouTube directly
- Regular update: keeps providing improved and new features like AR stickers and AI portrait
- GPU acceleration ：rendering faster when editing
- Screen Recording: Easily record your screen and camera for further video editing
Part2: Other Best Video Editing Software for Mac
1. iMovie (Best for Beginners)
iMovie is a video editing application that pre-installed on Mac. This application provides a range of editing tools to create and edit your videos handily. iMovie also supports premium audio editing features with an intuitive interface for beginners. You can perform white balancing, transition effects, cool filters as well as export your masterpiece video in 4K resolution.
Pros
- Completely free application
- Pro-level themes and features
- Audio editing tools
- 4K High-Definition resolution
Cons
- Lacks multi-cam, motion tracking and new updates
- Limited output controls
Price: Free
2. Adobe Premiere Elements
Premiere Elements is Adobe owned video editing software available for Mac. If you are new to video editing or just looking to edit your videos for fun, then you will find this application easy to navigate with all its features. Adobe Premiere Elements isn’t viable with 360-degree video and other imaginative abilities like multi-cam editing. The program’s AI tools will make it easier for you to perform the video editing process. Also, now it supports the masking effect with new updates.
Pros:
- Supports cross-platform
- AI-based features
- 4K resolution
Cons:
- Slow rendering process
- It also doesn’t support multi cam feature
Price: $69.99
3. Cyberlink PowerDirector 365
PowerDirector 365 is an easy-to-use video editing software for Mac users. Its top-notch features include great video effects, multi-cam editing, captions templates, audio editing and much more you can find out. Also, it supports a pro-level color correction features along to make your video stylish. But its new-released Mac version is not as good as its windows version.
Pros:
- Powerful yet simple to use app
- 360-degree VR editing capabilit
Cons:
- Lacks some audio editing features
Price: $59.99
4. Final Cut Pro
In case you are a high-level video content creator with a Mac, Final Cut Pro is the best video editor for you. This software comes up with some professional features that will empower you to make Hollywood-level videos from your work area. Paying the one-time cost will give you the overall ability to use its AI-based video editing features.
Pros:
- HDR resolution support
- Fast performance and Intuitive interface
- Also supports trackless timeline
Cons:
- It lacks stabilization tool
- Also it has no support for motion tracking feature
Price: $299
5. Adobe Premiere Pro (Best for Professionals)
If you are a professional video editor, Adobe Premiere Pro is your first to perform video editing. Adobe Premiere Pro can conduct 4K, 8K, and VR video editing. You can deal with an uncapped number of video tracks, which can be imported from practically any source you can consider.
Pros:
- Professional-quality tools and interface
- Compatibility with Adobe Creative Cloud
- Quality stabilization tools
Cons:
- Lacks sound effects templates
- Difficult to use for normal users
Price: $239.88
Part3: FAQs of Video Editing on Mac
1. Is MacBook good for video editing?
MacBook systems are known for their best graphics and cool display which makes them pretty much viable for video editing purposes. Hence making them the best fit for video editing tasks.
2. Is there a default video editor on Mac?
iMovie is Apple’s free and built-in video editor which is available right inside the Apple store and you need to activate it if you’re a new user of MacBook.
3. Is Final Cut Pro for Mac only?
Final Cut Pro is a profoundly skilled application available only for Apple users. Unfortunately, you can not use it on Windows systems. Final Cut Pro is designed for professional video editors. If you only need to edit personal videos and share on social platform, you can just go with Filmora, it suits you well and you can try it for free now.
Larry Jordan
Larry Jordan is a writer and a lover of all things video.
Follow @Larry Jordan
Larry Jordan
Mar 27, 2024• Proven solutions
Regardless of whether you’re an experienced content maker or simply a beginner to edit your videos, the right video editing software for your Mac can improve things significantly. It should assist you with doing everything you want when editing videos on Mac, from basic editing to advanced editing. It should take your videos to a higher level and make it stand apart from the group. So, we did some testing and have tracked down the best video editing software on Mac for you. Followings are our picks for you, you can choose the one suits you more.
Part1: Best Video Editor for Mac – Wondershare Filmora for Mac
Wondershare Filmora is a powerful video-editing software available for Windows and Mac users. Just like its intuitive interface, you can conduct video editing easily with only few clicks, your videos will become much more attractive. You can not only simply trim, crop, split and merge videos, but also utilizing motion tracking, key framing and color match and others advanced tools to make your video more attractive. There are also tons of video effects like AR stickers and AI portrait, filters, elements, and titles to personalize you video. What’s more, you can use almost all features of it via free version. Try it now to edit your video easily.
Main Features
- Rich export options: support all the popular video formats, allows burn to video and can share on YouTube directly
- Basic video editing: Quickly trim, cut, split, crop and merge videos
- Advanced video editing: motion tracking, key framing, audio ducking, green screen and more
- Amazing effects: cloud-based library with tons of effects, filters, transition and titles
- Rich export options: support all the popular video formats, allows burn to video and can share on YouTube directly
- Regular update: keeps providing improved and new features like AR stickers and AI portrait
- GPU acceleration ：rendering faster when editing
- Screen Recording: Easily record your screen and camera for further video editing
Part2: Other Best Video Editing Software for Mac
1. iMovie (Best for Beginners)
iMovie is a video editing application that pre-installed on Mac. This application provides a range of editing tools to create and edit your videos handily. iMovie also supports premium audio editing features with an intuitive interface for beginners. You can perform white balancing, transition effects, cool filters as well as export your masterpiece video in 4K resolution.
Pros
- Completely free application
- Pro-level themes and features
- Audio editing tools
- 4K High-Definition resolution
Cons
- Lacks multi-cam, motion tracking and new updates
- Limited output controls
Price: Free
2. Adobe Premiere Elements
Premiere Elements is Adobe owned video editing software available for Mac. If you are new to video editing or just looking to edit your videos for fun, then you will find this application easy to navigate with all its features. Adobe Premiere Elements isn’t viable with 360-degree video and other imaginative abilities like multi-cam editing. The program’s AI tools will make it easier for you to perform the video editing process. Also, now it supports the masking effect with new updates.
Pros:
- Supports cross-platform
- AI-based features
- 4K resolution
Cons:
- Slow rendering process
- It also doesn’t support multi cam feature
Price: $69.99
3. Cyberlink PowerDirector 365
PowerDirector 365 is an easy-to-use video editing software for Mac users. Its top-notch features include great video effects, multi-cam editing, captions templates, audio editing and much more you can find out. Also, it supports a pro-level color correction features along to make your video stylish. But its new-released Mac version is not as good as its windows version.
Pros:
- Powerful yet simple to use app
- 360-degree VR editing capabilit
Cons:
- Lacks some audio editing features
Price: $59.99
4. Final Cut Pro
In case you are a high-level video content creator with a Mac, Final Cut Pro is the best video editor for you. This software comes up with some professional features that will empower you to make Hollywood-level videos from your work area. Paying the one-time cost will give you the overall ability to use its AI-based video editing features.
Pros:
- HDR resolution support
- Fast performance and Intuitive interface
- Also supports trackless timeline
Cons:
- It lacks stabilization tool
- Also it has no support for motion tracking feature
Price: $299
5. Adobe Premiere Pro (Best for Professionals)
If you are a professional video editor, Adobe Premiere Pro is your first to perform video editing. Adobe Premiere Pro can conduct 4K, 8K, and VR video editing. You can deal with an uncapped number of video tracks, which can be imported from practically any source you can consider.
Pros:
- Professional-quality tools and interface
- Compatibility with Adobe Creative Cloud
- Quality stabilization tools
Cons:
- Lacks sound effects templates
- Difficult to use for normal users
Price: $239.88
Part3: FAQs of Video Editing on Mac
1. Is MacBook good for video editing?
MacBook systems are known for their best graphics and cool display which makes them pretty much viable for video editing purposes. Hence making them the best fit for video editing tasks.
2. Is there a default video editor on Mac?
iMovie is Apple’s free and built-in video editor which is available right inside the Apple store and you need to activate it if you’re a new user of MacBook.
3. Is Final Cut Pro for Mac only?
Final Cut Pro is a profoundly skilled application available only for Apple users. Unfortunately, you can not use it on Windows systems. Final Cut Pro is designed for professional video editors. If you only need to edit personal videos and share on social platform, you can just go with Filmora, it suits you well and you can try it for free now.
Larry Jordan
Larry Jordan is a writer and a lover of all things video.
Follow @Larry Jordan
Larry Jordan
Mar 27, 2024• Proven solutions
Regardless of whether you’re an experienced content maker or simply a beginner to edit your videos, the right video editing software for your Mac can improve things significantly. It should assist you with doing everything you want when editing videos on Mac, from basic editing to advanced editing. It should take your videos to a higher level and make it stand apart from the group. So, we did some testing and have tracked down the best video editing software on Mac for you. Followings are our picks for you, you can choose the one suits you more.
Part1: Best Video Editor for Mac – Wondershare Filmora for Mac
Wondershare Filmora is a powerful video-editing software available for Windows and Mac users. Just like its intuitive interface, you can conduct video editing easily with only few clicks, your videos will become much more attractive. You can not only simply trim, crop, split and merge videos, but also utilizing motion tracking, key framing and color match and others advanced tools to make your video more attractive. There are also tons of video effects like AR stickers and AI portrait, filters, elements, and titles to personalize you video. What’s more, you can use almost all features of it via free version. Try it now to edit your video easily.
Main Features
- Rich export options: support all the popular video formats, allows burn to video and can share on YouTube directly
- Basic video editing: Quickly trim, cut, split, crop and merge videos
- Advanced video editing: motion tracking, key framing, audio ducking, green screen and more
- Amazing effects: cloud-based library with tons of effects, filters, transition and titles
- Rich export options: support all the popular video formats, allows burn to video and can share on YouTube directly
- Regular update: keeps providing improved and new features like AR stickers and AI portrait
- GPU acceleration ：rendering faster when editing
- Screen Recording: Easily record your screen and camera for further video editing
Part2: Other Best Video Editing Software for Mac
1. iMovie (Best for Beginners)
iMovie is a video editing application that pre-installed on Mac. This application provides a range of editing tools to create and edit your videos handily. iMovie also supports premium audio editing features with an intuitive interface for beginners. You can perform white balancing, transition effects, cool filters as well as export your masterpiece video in 4K resolution.
Pros
- Completely free application
- Pro-level themes and features
- Audio editing tools
- 4K High-Definition resolution
Cons
- Lacks multi-cam, motion tracking and new updates
- Limited output controls
Price: Free
2. Adobe Premiere Elements
Premiere Elements is Adobe owned video editing software available for Mac. If you are new to video editing or just looking to edit your videos for fun, then you will find this application easy to navigate with all its features. Adobe Premiere Elements isn’t viable with 360-degree video and other imaginative abilities like multi-cam editing. The program’s AI tools will make it easier for you to perform the video editing process. Also, now it supports the masking effect with new updates.
Pros:
- Supports cross-platform
- AI-based features
- 4K resolution
Cons:
- Slow rendering process
- It also doesn’t support multi cam feature
Price: $69.99
3. Cyberlink PowerDirector 365
PowerDirector 365 is an easy-to-use video editing software for Mac users. Its top-notch features include great video effects, multi-cam editing, captions templates, audio editing and much more you can find out. Also, it supports a pro-level color correction features along to make your video stylish. But its new-released Mac version is not as good as its windows version.
Pros:
- Powerful yet simple to use app
- 360-degree VR editing capabilit
Cons:
- Lacks some audio editing features
Price: $59.99
4. Final Cut Pro
In case you are a high-level video content creator with a Mac, Final Cut Pro is the best video editor for you. This software comes up with some professional features that will empower you to make Hollywood-level videos from your work area. Paying the one-time cost will give you the overall ability to use its AI-based video editing features.
Pros:
- HDR resolution support
- Fast performance and Intuitive interface
- Also supports trackless timeline
Cons:
- It lacks stabilization tool
- Also it has no support for motion tracking feature
Price: $299
5. Adobe Premiere Pro (Best for Professionals)
If you are a professional video editor, Adobe Premiere Pro is your first to perform video editing. Adobe Premiere Pro can conduct 4K, 8K, and VR video editing. You can deal with an uncapped number of video tracks, which can be imported from practically any source you can consider.
Pros:
- Professional-quality tools and interface
- Compatibility with Adobe Creative Cloud
- Quality stabilization tools
Cons:
- Lacks sound effects templates
- Difficult to use for normal users
Price: $239.88
Part3: FAQs of Video Editing on Mac
1. Is MacBook good for video editing?
MacBook systems are known for their best graphics and cool display which makes them pretty much viable for video editing purposes. Hence making them the best fit for video editing tasks.
2. Is there a default video editor on Mac?
iMovie is Apple’s free and built-in video editor which is available right inside the Apple store and you need to activate it if you’re a new user of MacBook.
3. Is Final Cut Pro for Mac only?
Final Cut Pro is a profoundly skilled application available only for Apple users. Unfortunately, you can not use it on Windows systems. Final Cut Pro is designed for professional video editors. If you only need to edit personal videos and share on social platform, you can just go with Filmora, it suits you well and you can try it for free now.
Larry Jordan
Larry Jordan is a writer and a lover of all things video.
Follow @Larry Jordan
Larry Jordan
Mar 27, 2024• Proven solutions
Regardless of whether you’re an experienced content maker or simply a beginner to edit your videos, the right video editing software for your Mac can improve things significantly. It should assist you with doing everything you want when editing videos on Mac, from basic editing to advanced editing. It should take your videos to a higher level and make it stand apart from the group. So, we did some testing and have tracked down the best video editing software on Mac for you. Followings are our picks for you, you can choose the one suits you more.
Part1: Best Video Editor for Mac – Wondershare Filmora for Mac
Wondershare Filmora is a powerful video-editing software available for Windows and Mac users. Just like its intuitive interface, you can conduct video editing easily with only few clicks, your videos will become much more attractive. You can not only simply trim, crop, split and merge videos, but also utilizing motion tracking, key framing and color match and others advanced tools to make your video more attractive. There are also tons of video effects like AR stickers and AI portrait, filters, elements, and titles to personalize you video. What’s more, you can use almost all features of it via free version. Try it now to edit your video easily.
Main Features
- Rich export options: support all the popular video formats, allows burn to video and can share on YouTube directly
- Basic video editing: Quickly trim, cut, split, crop and merge videos
- Advanced video editing: motion tracking, key framing, audio ducking, green screen and more
- Amazing effects: cloud-based library with tons of effects, filters, transition and titles
- Rich export options: support all the popular video formats, allows burn to video and can share on YouTube directly
- Regular update: keeps providing improved and new features like AR stickers and AI portrait
- GPU acceleration ：rendering faster when editing
- Screen Recording: Easily record your screen and camera for further video editing
Part2: Other Best Video Editing Software for Mac
1. iMovie (Best for Beginners)
iMovie is a video editing application that pre-installed on Mac. This application provides a range of editing tools to create and edit your videos handily. iMovie also supports premium audio editing features with an intuitive interface for beginners. You can perform white balancing, transition effects, cool filters as well as export your masterpiece video in 4K resolution.
Pros
- Completely free application
- Pro-level themes and features
- Audio editing tools
- 4K High-Definition resolution
Cons
- Lacks multi-cam, motion tracking and new updates
- Limited output controls
Price: Free
2. Adobe Premiere Elements
Premiere Elements is Adobe owned video editing software available for Mac. If you are new to video editing or just looking to edit your videos for fun, then you will find this application easy to navigate with all its features. Adobe Premiere Elements isn’t viable with 360-degree video and other imaginative abilities like multi-cam editing. The program’s AI tools will make it easier for you to perform the video editing process. Also, now it supports the masking effect with new updates.
Pros:
- Supports cross-platform
- AI-based features
- 4K resolution
Cons:
- Slow rendering process
- It also doesn’t support multi cam feature
Price: $69.99
3. Cyberlink PowerDirector 365
PowerDirector 365 is an easy-to-use video editing software for Mac users. Its top-notch features include great video effects, multi-cam editing, captions templates, audio editing and much more you can find out. Also, it supports a pro-level color correction features along to make your video stylish. But its new-released Mac version is not as good as its windows version.
Pros:
- Powerful yet simple to use app
- 360-degree VR editing capabilit
Cons:
- Lacks some audio editing features
Price: $59.99
4. Final Cut Pro
In case you are a high-level video content creator with a Mac, Final Cut Pro is the best video editor for you. This software comes up with some professional features that will empower you to make Hollywood-level videos from your work area. Paying the one-time cost will give you the overall ability to use its AI-based video editing features.
Pros:
- HDR resolution support
- Fast performance and Intuitive interface
- Also supports trackless timeline
Cons:
- It lacks stabilization tool
- Also it has no support for motion tracking feature
Price: $299
5. Adobe Premiere Pro (Best for Professionals)
If you are a professional video editor, Adobe Premiere Pro is your first to perform video editing. Adobe Premiere Pro can conduct 4K, 8K, and VR video editing. You can deal with an uncapped number of video tracks, which can be imported from practically any source you can consider.
Pros:
- Professional-quality tools and interface
- Compatibility with Adobe Creative Cloud
- Quality stabilization tools
Cons:
- Lacks sound effects templates
- Difficult to use for normal users
Price: $239.88
Part3: FAQs of Video Editing on Mac
1. Is MacBook good for video editing?
MacBook systems are known for their best graphics and cool display which makes them pretty much viable for video editing purposes. Hence making them the best fit for video editing tasks.
2. Is there a default video editor on Mac?
iMovie is Apple’s free and built-in video editor which is available right inside the Apple store and you need to activate it if you’re a new user of MacBook.
3. Is Final Cut Pro for Mac only?
Final Cut Pro is a profoundly skilled application available only for Apple users. Unfortunately, you can not use it on Windows systems. Final Cut Pro is designed for professional video editors. If you only need to edit personal videos and share on social platform, you can just go with Filmora, it suits you well and you can try it for free now.
Larry Jordan
Larry Jordan is a writer and a lover of all things video.
Follow @Larry Jordan
Chromebook Linux Installation: A Beginner’s Tutorial
How to Install Linux on Chromebook
Ollie Mattison
Mar 27, 2024• Proven solutions
Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.
Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.
- Part 1: Preparing before installing Linux OS on Chromebook
- Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
- Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
- Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
- Part 5: Recommended Linux Video Editing Software
Part 1: Preparing before installing Linux OS on Chromebook
The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.
- Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
- Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
- Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.
Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.
1. Acessing the developer mode
The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.
2. Installing Chroot
At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.
Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.
3. Optimizing your new OS
You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.
4. Remove Chroot from your Chromebook
If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.
Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.
1. Preparation for the installation
Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.
2. Installing ChrUbuntu
Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.
Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.
3. Uninstall ChrUbuntu
Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.
This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.
Part 4: How to Dual-Boot a Chromebook Using Gallium OS
If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.
1. Preparation for the installation
In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.
2. Enabling the Legacy Mode
Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.
3. Installation process
If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.
Which Method is the Best?
Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.
On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.
Part 5: Recommended Linux Video Editing Software: Lightworks
Price: $24.99/month, although free versions of the software are also available.
What we like: A powerful video and audio editor perfectly suited for the production of professional video content.
What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.
Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.
The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.
Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.
- Part 1: Preparing before installing Linux OS on Chromebook
- Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
- Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
- Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
- Part 5: Recommended Linux Video Editing Software
Part 1: Preparing before installing Linux OS on Chromebook
The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.
- Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
- Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
- Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.
Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.
1. Acessing the developer mode
The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.
2. Installing Chroot
At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.
Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.
3. Optimizing your new OS
You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.
4. Remove Chroot from your Chromebook
If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.
Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.
1. Preparation for the installation
Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.
2. Installing ChrUbuntu
Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.
Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.
3. Uninstall ChrUbuntu
Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.
This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.
Part 4: How to Dual-Boot a Chromebook Using Gallium OS
If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.
1. Preparation for the installation
In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.
2. Enabling the Legacy Mode
Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.
3. Installation process
If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.
Which Method is the Best?
Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.
On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.
Part 5: Recommended Linux Video Editing Software: Lightworks
Price: $24.99/month, although free versions of the software are also available.
What we like: A powerful video and audio editor perfectly suited for the production of professional video content.
What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.
Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.
The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.
Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.
- Part 1: Preparing before installing Linux OS on Chromebook
- Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
- Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
- Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
- Part 5: Recommended Linux Video Editing Software
Part 1: Preparing before installing Linux OS on Chromebook
The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.
- Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
- Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
- Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.
Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.
1. Acessing the developer mode
The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.
2. Installing Chroot
At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.
Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.
3. Optimizing your new OS
You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.
4. Remove Chroot from your Chromebook
If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.
Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.
1. Preparation for the installation
Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.
2. Installing ChrUbuntu
Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.
Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.
3. Uninstall ChrUbuntu
Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.
This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.
Part 4: How to Dual-Boot a Chromebook Using Gallium OS
If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.
1. Preparation for the installation
In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.
2. Enabling the Legacy Mode
Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.
3. Installation process
If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.
Which Method is the Best?
Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.
On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.
Part 5: Recommended Linux Video Editing Software: Lightworks
Price: $24.99/month, although free versions of the software are also available.
What we like: A powerful video and audio editor perfectly suited for the production of professional video content.
What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.
Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.
The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.
Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.
- Part 1: Preparing before installing Linux OS on Chromebook
- Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
- Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
- Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
- Part 5: Recommended Linux Video Editing Software
Part 1: Preparing before installing Linux OS on Chromebook
The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.
- Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
- Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
- Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.
Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.
1. Acessing the developer mode
The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.
2. Installing Chroot
At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.
Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.
3. Optimizing your new OS
You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.
4. Remove Chroot from your Chromebook
If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.
Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.
1. Preparation for the installation
Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.
2. Installing ChrUbuntu
Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.
Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.
3. Uninstall ChrUbuntu
Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.
This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.
Part 4: How to Dual-Boot a Chromebook Using Gallium OS
If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.
1. Preparation for the installation
In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.
2. Enabling the Legacy Mode
Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.
3. Installation process
If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.
Which Method is the Best?
Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.
On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.
Part 5: Recommended Linux Video Editing Software: Lightworks
Price: $24.99/month, although free versions of the software are also available.
What we like: A powerful video and audio editor perfectly suited for the production of professional video content.
What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.
Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.
The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
FCP in the Spotlight: 10 Big-Budget Movies That Trusted This Editing Tool
Top 10 Famous Movies Made By Final Cut Pro
Benjamin Arango
Mar 27, 2024• Proven solutions
Developed as video editing software that has been developed by Apple, Final Cut Pro began life as software designed to made simple video editing accessible for video hobbyists and independent filmmakers. However, in recent years the capabilities of Final Cut Pro have evolved significantly and we are now seeing major Hollywood movies also being edited with this software.
Do you want to turn your own video into a Hollywood film-like video? Check this guide on How to make big-budget cinematic look video with Final Cut Pro.
You may also like: 8 Best Movie Trailer Template for After Effects
Top 10 Movies Made by Final Cut Pro
Let’s take a look at ten major movies that have been edited using Final Cut Pro.
1. The Social Network (2010)
Based on the rise of the phenomenon that we now know as Facebook, The Social Network starred Jesse Eisenberg, Andrew Garfield and Justin Timberlake. The movie performed well at the box office and was also positively received by movie critics.
The film won an Academy Award for Best Editing, collected by Kirk Baxter and Angus Wall. They used Final Cut Pro to edit the film, and one of the things they really like about the software is the ability to do multiple timelines. Final Cut Pro was also used in this movie to enable face replacement in a number of scenes. Two of the key characters in the movie are twins, and so the scenes were filmed with actors (who weren’t twins) and then the editing software was used to create the illusion that they were twins. Digital matte paintings was another feature of this movie that relied on the functionality of Final Cut Pro.
2. The Girl with the Dragon Tattoo (2011)
This was the US adaptation of the earlier Swedish film of the same name - based on the novel by Stieg Larsson. Starring Daniel Craig and Rooney Mara, the story is a crime thriller trying to uncover the secrets surrounding the disappearance of a young girl from a wealthy family.
One of the challenges with this movie was that there were a lot of invisible effects throughout the film. Final Cut Pro was used to achieve the shot stabilization and the visual enhancements - everything from matte painting to creating seasonal elements such as snow.
3. John Carter (2011)
A science fiction adventure, this film performed so badly at the box office that it caused major financial problems for its studio Disney.
The editing of the John Carter movie was a particular challenge as a lot of the action was shot twice during the troubled production. The editor Eric Zumbrunnen used Final Cut Pro to piece the various elements together. With a huge range of CGI and creature effects to deal with, the editing process on this movie was extremely complex. Final Cut Pro was used to create a lot of the background detail need to bring the green screen scenes to life.
4. 500 Days of Summer (2009)
This was a cute, quirky romantic comedy starring Joseph Gordon-Levitt and Zooey Deschanel.
Editing on the movie was by Alan Edward Bell in DVCPro HD format on Final Cut Pro. Because the storyline of the movie unfolds in a non-linear timeline, the workflow feature of Final Cut Pro made it easier to manage the sequencing of the different scenes. There were also 250 invisible effects which were created using Final Cut Pro’s editing features.
5. X-Men Origins: Wolverine (2009)
Continuing the X-Men franchise, this installment traces Wolverine’s childhood and the relationship with his brother. It didn’t really appeal to X-Men fans or movie critics.
Editing on the movie was by Nicolas De Toth and Megan Gill. There were a number of continuity glitches identified during the production of this movie but De Toth and Gill used Final Pro Cut to keep a consistent flow to the narrative. What is interesting about the editing on this movie is that all the cutting of the scenes required was done on Final Cut Pro 5, taking advantage of the software’s HD abilities and also the multi-clip features.
6. Burn After Reading (2008)
A black comedy from the talented brothers Joel and Ethan Coen, they wrote, produced, edited, and directed the movie.
The Coen brothers used Final Cut Pro on this movie because it was simple and easy to use - they were blocking together the rough cuts as the scenes were being shot, and Final Cut Pro gave them the flexibility that they needed to edit quickly. On this movie most of the action was shot using Sony cameras but there were several scenes on which a RED camera was added when an additional camera was needed. Even though there is a significantly different workflow between the two types of camera, the RED material was able to be integrated smoothly with the Sony footage.
7. No Country for Old Men (2007)
A neo-Western thriller from Coen brothers. They directed, wrote, and edited this production.
The movie was also nominated for an Academy Award for Best Editing for editor Roderick Jaynes (a pseudonym for Joel and Ethan Coen).
Directing and editing a movie brings the two processes a lot closer together for the Coen brothers. An easy to use product such as Final Cut Pro ensures that they can construct the movie’s narrative using the timeline features of the product. This movie marked a chance in approach for the Coen brothers, who took advantage of the better resolution DVCPRO HD for their cutting process compared to earlier films that were cut at DV resolution.
8. 300 (2007)
Based on a graphic novel by Frank Miller, this is the fictionalized retelling of the Battle Termopylae - part of the Persian Wars. Directed by Zack Snyder, the movie was filmed with a super-imposition chroma key technique to help replicate the imagery of the original comic book. Editing on the movie was by William Hoy.
To capture the graphic novel look and feel of the film’s images, editor Hoy used a number of the key Final Cut Pro features such as the adjustment layer and blending modes to create depth and mood. With the look and feel of this movie so dependent on the effects created, editor Hoy spent a lot of time debating what was being added visually to each shot and how this would impact the length and continuity of each scene.
9. Sky Captain and the World of Tomorrow (2004)
With big name stars (Gwyneth Paltrow and Jude Law), this was an unusual film that used digital artists to build multi-layered 2D and 3D backgrounds for live action footage, with hand-drawn storyboards recreated as computer-generated 3D animatics. Critically it was well received but didn’t set the box office alight.
Editing on the movie was by Sabrina Plisco.
Final Cut Pro was particularly critical to create a scene between two characters that was shot in a physical set (unlike the digital soundstage that was used for the rest of the movie). Final Cut Pro allowed the filmmakers to line up the animatics with the live onstage footage. One of the challenges with this movie is that the editors had to manually assign time-codes to each take - the clips were then rendered out and sorted so that they could be used on a Final Cut Pro SD workstation. This approach was also used to create the master off-line cut. Batch lists of the cuts were then imported into Final Cut Pro.
10. Cold Mountain (2003)
This is an epic Civil War drama based on the novel by Charles Frazier. Starring Jude Law, Nicole Kidman, and Renee Zellweger this was critically acclaimed and performed reasonably well at the box office.
The movie was also nominated for an Academy Award for Best Editing let by editor Walter Murch.
This was really seen as the breakthrough movie for the use of Final Cut Pro in Hollywood Movies. An entire book has been produced analysing how editor Murch used Final Cut Pro to edit the movie and analysis its impact on future cinema productions. Editor Murch believes that the use of Final Cut Pro on this movie indirected affected the ultimate creative outcome. In particular, the use of the DVD authoring capabilities on Final Cut Pro meant that the editing team was able to look at the material more often, sharing it with more people, and changing the way that they looked at certain scenes.
While Hollywood movies require editing tools of the highest order, the range of effects that you can achieve using Final Cut Pro is impressive - as well as the standard ripple, roll, slip, slide, scrub, razor blade and time remapping edit functions, Final Cut Pro also comes with a range of video transitions and a range of video and audio filters that will take your film project to the next level.
It is clear that Final Cut Pro is definitely now a star in the editing of Hollywood movies, it is time to make it a star in editing your movies as well.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Developed as video editing software that has been developed by Apple, Final Cut Pro began life as software designed to made simple video editing accessible for video hobbyists and independent filmmakers. However, in recent years the capabilities of Final Cut Pro have evolved significantly and we are now seeing major Hollywood movies also being edited with this software.
Do you want to turn your own video into a Hollywood film-like video? Check this guide on How to make big-budget cinematic look video with Final Cut Pro.
You may also like: 8 Best Movie Trailer Template for After Effects
Top 10 Movies Made by Final Cut Pro
Let’s take a look at ten major movies that have been edited using Final Cut Pro.
1. The Social Network (2010)
Based on the rise of the phenomenon that we now know as Facebook, The Social Network starred Jesse Eisenberg, Andrew Garfield and Justin Timberlake. The movie performed well at the box office and was also positively received by movie critics.
The film won an Academy Award for Best Editing, collected by Kirk Baxter and Angus Wall. They used Final Cut Pro to edit the film, and one of the things they really like about the software is the ability to do multiple timelines. Final Cut Pro was also used in this movie to enable face replacement in a number of scenes. Two of the key characters in the movie are twins, and so the scenes were filmed with actors (who weren’t twins) and then the editing software was used to create the illusion that they were twins. Digital matte paintings was another feature of this movie that relied on the functionality of Final Cut Pro.
2. The Girl with the Dragon Tattoo (2011)
This was the US adaptation of the earlier Swedish film of the same name - based on the novel by Stieg Larsson. Starring Daniel Craig and Rooney Mara, the story is a crime thriller trying to uncover the secrets surrounding the disappearance of a young girl from a wealthy family.
One of the challenges with this movie was that there were a lot of invisible effects throughout the film. Final Cut Pro was used to achieve the shot stabilization and the visual enhancements - everything from matte painting to creating seasonal elements such as snow.
3. John Carter (2011)
A science fiction adventure, this film performed so badly at the box office that it caused major financial problems for its studio Disney.
The editing of the John Carter movie was a particular challenge as a lot of the action was shot twice during the troubled production. The editor Eric Zumbrunnen used Final Cut Pro to piece the various elements together. With a huge range of CGI and creature effects to deal with, the editing process on this movie was extremely complex. Final Cut Pro was used to create a lot of the background detail need to bring the green screen scenes to life.
4. 500 Days of Summer (2009)
This was a cute, quirky romantic comedy starring Joseph Gordon-Levitt and Zooey Deschanel.
Editing on the movie was by Alan Edward Bell in DVCPro HD format on Final Cut Pro. Because the storyline of the movie unfolds in a non-linear timeline, the workflow feature of Final Cut Pro made it easier to manage the sequencing of the different scenes. There were also 250 invisible effects which were created using Final Cut Pro’s editing features.
5. X-Men Origins: Wolverine (2009)
Continuing the X-Men franchise, this installment traces Wolverine’s childhood and the relationship with his brother. It didn’t really appeal to X-Men fans or movie critics.
Editing on the movie was by Nicolas De Toth and Megan Gill. There were a number of continuity glitches identified during the production of this movie but De Toth and Gill used Final Pro Cut to keep a consistent flow to the narrative. What is interesting about the editing on this movie is that all the cutting of the scenes required was done on Final Cut Pro 5, taking advantage of the software’s HD abilities and also the multi-clip features.
6. Burn After Reading (2008)
A black comedy from the talented brothers Joel and Ethan Coen, they wrote, produced, edited, and directed the movie.
The Coen brothers used Final Cut Pro on this movie because it was simple and easy to use - they were blocking together the rough cuts as the scenes were being shot, and Final Cut Pro gave them the flexibility that they needed to edit quickly. On this movie most of the action was shot using Sony cameras but there were several scenes on which a RED camera was added when an additional camera was needed. Even though there is a significantly different workflow between the two types of camera, the RED material was able to be integrated smoothly with the Sony footage.
7. No Country for Old Men (2007)
A neo-Western thriller from Coen brothers. They directed, wrote, and edited this production.
The movie was also nominated for an Academy Award for Best Editing for editor Roderick Jaynes (a pseudonym for Joel and Ethan Coen).
Directing and editing a movie brings the two processes a lot closer together for the Coen brothers. An easy to use product such as Final Cut Pro ensures that they can construct the movie’s narrative using the timeline features of the product. This movie marked a chance in approach for the Coen brothers, who took advantage of the better resolution DVCPRO HD for their cutting process compared to earlier films that were cut at DV resolution.
8. 300 (2007)
Based on a graphic novel by Frank Miller, this is the fictionalized retelling of the Battle Termopylae - part of the Persian Wars. Directed by Zack Snyder, the movie was filmed with a super-imposition chroma key technique to help replicate the imagery of the original comic book. Editing on the movie was by William Hoy.
To capture the graphic novel look and feel of the film’s images, editor Hoy used a number of the key Final Cut Pro features such as the adjustment layer and blending modes to create depth and mood. With the look and feel of this movie so dependent on the effects created, editor Hoy spent a lot of time debating what was being added visually to each shot and how this would impact the length and continuity of each scene.
9. Sky Captain and the World of Tomorrow (2004)
With big name stars (Gwyneth Paltrow and Jude Law), this was an unusual film that used digital artists to build multi-layered 2D and 3D backgrounds for live action footage, with hand-drawn storyboards recreated as computer-generated 3D animatics. Critically it was well received but didn’t set the box office alight.
Editing on the movie was by Sabrina Plisco.
Final Cut Pro was particularly critical to create a scene between two characters that was shot in a physical set (unlike the digital soundstage that was used for the rest of the movie). Final Cut Pro allowed the filmmakers to line up the animatics with the live onstage footage. One of the challenges with this movie is that the editors had to manually assign time-codes to each take - the clips were then rendered out and sorted so that they could be used on a Final Cut Pro SD workstation. This approach was also used to create the master off-line cut. Batch lists of the cuts were then imported into Final Cut Pro.
10. Cold Mountain (2003)
This is an epic Civil War drama based on the novel by Charles Frazier. Starring Jude Law, Nicole Kidman, and Renee Zellweger this was critically acclaimed and performed reasonably well at the box office.
The movie was also nominated for an Academy Award for Best Editing let by editor Walter Murch.
This was really seen as the breakthrough movie for the use of Final Cut Pro in Hollywood Movies. An entire book has been produced analysing how editor Murch used Final Cut Pro to edit the movie and analysis its impact on future cinema productions. Editor Murch believes that the use of Final Cut Pro on this movie indirected affected the ultimate creative outcome. In particular, the use of the DVD authoring capabilities on Final Cut Pro meant that the editing team was able to look at the material more often, sharing it with more people, and changing the way that they looked at certain scenes.
While Hollywood movies require editing tools of the highest order, the range of effects that you can achieve using Final Cut Pro is impressive - as well as the standard ripple, roll, slip, slide, scrub, razor blade and time remapping edit functions, Final Cut Pro also comes with a range of video transitions and a range of video and audio filters that will take your film project to the next level.
It is clear that Final Cut Pro is definitely now a star in the editing of Hollywood movies, it is time to make it a star in editing your movies as well.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Developed as video editing software that has been developed by Apple, Final Cut Pro began life as software designed to made simple video editing accessible for video hobbyists and independent filmmakers. However, in recent years the capabilities of Final Cut Pro have evolved significantly and we are now seeing major Hollywood movies also being edited with this software.
Do you want to turn your own video into a Hollywood film-like video? Check this guide on How to make big-budget cinematic look video with Final Cut Pro.
You may also like: 8 Best Movie Trailer Template for After Effects
Top 10 Movies Made by Final Cut Pro
Let’s take a look at ten major movies that have been edited using Final Cut Pro.
1. The Social Network (2010)
Based on the rise of the phenomenon that we now know as Facebook, The Social Network starred Jesse Eisenberg, Andrew Garfield and Justin Timberlake. The movie performed well at the box office and was also positively received by movie critics.
The film won an Academy Award for Best Editing, collected by Kirk Baxter and Angus Wall. They used Final Cut Pro to edit the film, and one of the things they really like about the software is the ability to do multiple timelines. Final Cut Pro was also used in this movie to enable face replacement in a number of scenes. Two of the key characters in the movie are twins, and so the scenes were filmed with actors (who weren’t twins) and then the editing software was used to create the illusion that they were twins. Digital matte paintings was another feature of this movie that relied on the functionality of Final Cut Pro.
2. The Girl with the Dragon Tattoo (2011)
This was the US adaptation of the earlier Swedish film of the same name - based on the novel by Stieg Larsson. Starring Daniel Craig and Rooney Mara, the story is a crime thriller trying to uncover the secrets surrounding the disappearance of a young girl from a wealthy family.
One of the challenges with this movie was that there were a lot of invisible effects throughout the film. Final Cut Pro was used to achieve the shot stabilization and the visual enhancements - everything from matte painting to creating seasonal elements such as snow.
3. John Carter (2011)
A science fiction adventure, this film performed so badly at the box office that it caused major financial problems for its studio Disney.
The editing of the John Carter movie was a particular challenge as a lot of the action was shot twice during the troubled production. The editor Eric Zumbrunnen used Final Cut Pro to piece the various elements together. With a huge range of CGI and creature effects to deal with, the editing process on this movie was extremely complex. Final Cut Pro was used to create a lot of the background detail need to bring the green screen scenes to life.
4. 500 Days of Summer (2009)
This was a cute, quirky romantic comedy starring Joseph Gordon-Levitt and Zooey Deschanel.
Editing on the movie was by Alan Edward Bell in DVCPro HD format on Final Cut Pro. Because the storyline of the movie unfolds in a non-linear timeline, the workflow feature of Final Cut Pro made it easier to manage the sequencing of the different scenes. There were also 250 invisible effects which were created using Final Cut Pro’s editing features.
5. X-Men Origins: Wolverine (2009)
Continuing the X-Men franchise, this installment traces Wolverine’s childhood and the relationship with his brother. It didn’t really appeal to X-Men fans or movie critics.
Editing on the movie was by Nicolas De Toth and Megan Gill. There were a number of continuity glitches identified during the production of this movie but De Toth and Gill used Final Pro Cut to keep a consistent flow to the narrative. What is interesting about the editing on this movie is that all the cutting of the scenes required was done on Final Cut Pro 5, taking advantage of the software’s HD abilities and also the multi-clip features.
6. Burn After Reading (2008)
A black comedy from the talented brothers Joel and Ethan Coen, they wrote, produced, edited, and directed the movie.
The Coen brothers used Final Cut Pro on this movie because it was simple and easy to use - they were blocking together the rough cuts as the scenes were being shot, and Final Cut Pro gave them the flexibility that they needed to edit quickly. On this movie most of the action was shot using Sony cameras but there were several scenes on which a RED camera was added when an additional camera was needed. Even though there is a significantly different workflow between the two types of camera, the RED material was able to be integrated smoothly with the Sony footage.
7. No Country for Old Men (2007)
A neo-Western thriller from Coen brothers. They directed, wrote, and edited this production.
The movie was also nominated for an Academy Award for Best Editing for editor Roderick Jaynes (a pseudonym for Joel and Ethan Coen).
Directing and editing a movie brings the two processes a lot closer together for the Coen brothers. An easy to use product such as Final Cut Pro ensures that they can construct the movie’s narrative using the timeline features of the product. This movie marked a chance in approach for the Coen brothers, who took advantage of the better resolution DVCPRO HD for their cutting process compared to earlier films that were cut at DV resolution.
8. 300 (2007)
Based on a graphic novel by Frank Miller, this is the fictionalized retelling of the Battle Termopylae - part of the Persian Wars. Directed by Zack Snyder, the movie was filmed with a super-imposition chroma key technique to help replicate the imagery of the original comic book. Editing on the movie was by William Hoy.
To capture the graphic novel look and feel of the film’s images, editor Hoy used a number of the key Final Cut Pro features such as the adjustment layer and blending modes to create depth and mood. With the look and feel of this movie so dependent on the effects created, editor Hoy spent a lot of time debating what was being added visually to each shot and how this would impact the length and continuity of each scene.
9. Sky Captain and the World of Tomorrow (2004)
With big name stars (Gwyneth Paltrow and Jude Law), this was an unusual film that used digital artists to build multi-layered 2D and 3D backgrounds for live action footage, with hand-drawn storyboards recreated as computer-generated 3D animatics. Critically it was well received but didn’t set the box office alight.
Editing on the movie was by Sabrina Plisco.
Final Cut Pro was particularly critical to create a scene between two characters that was shot in a physical set (unlike the digital soundstage that was used for the rest of the movie). Final Cut Pro allowed the filmmakers to line up the animatics with the live onstage footage. One of the challenges with this movie is that the editors had to manually assign time-codes to each take - the clips were then rendered out and sorted so that they could be used on a Final Cut Pro SD workstation. This approach was also used to create the master off-line cut. Batch lists of the cuts were then imported into Final Cut Pro.
10. Cold Mountain (2003)
This is an epic Civil War drama based on the novel by Charles Frazier. Starring Jude Law, Nicole Kidman, and Renee Zellweger this was critically acclaimed and performed reasonably well at the box office.
The movie was also nominated for an Academy Award for Best Editing let by editor Walter Murch.
This was really seen as the breakthrough movie for the use of Final Cut Pro in Hollywood Movies. An entire book has been produced analysing how editor Murch used Final Cut Pro to edit the movie and analysis its impact on future cinema productions. Editor Murch believes that the use of Final Cut Pro on this movie indirected affected the ultimate creative outcome. In particular, the use of the DVD authoring capabilities on Final Cut Pro meant that the editing team was able to look at the material more often, sharing it with more people, and changing the way that they looked at certain scenes.
While Hollywood movies require editing tools of the highest order, the range of effects that you can achieve using Final Cut Pro is impressive - as well as the standard ripple, roll, slip, slide, scrub, razor blade and time remapping edit functions, Final Cut Pro also comes with a range of video transitions and a range of video and audio filters that will take your film project to the next level.
It is clear that Final Cut Pro is definitely now a star in the editing of Hollywood movies, it is time to make it a star in editing your movies as well.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Developed as video editing software that has been developed by Apple, Final Cut Pro began life as software designed to made simple video editing accessible for video hobbyists and independent filmmakers. However, in recent years the capabilities of Final Cut Pro have evolved significantly and we are now seeing major Hollywood movies also being edited with this software.
Do you want to turn your own video into a Hollywood film-like video? Check this guide on How to make big-budget cinematic look video with Final Cut Pro.
You may also like: 8 Best Movie Trailer Template for After Effects
Top 10 Movies Made by Final Cut Pro
Let’s take a look at ten major movies that have been edited using Final Cut Pro.
1. The Social Network (2010)
Based on the rise of the phenomenon that we now know as Facebook, The Social Network starred Jesse Eisenberg, Andrew Garfield and Justin Timberlake. The movie performed well at the box office and was also positively received by movie critics.
The film won an Academy Award for Best Editing, collected by Kirk Baxter and Angus Wall. They used Final Cut Pro to edit the film, and one of the things they really like about the software is the ability to do multiple timelines. Final Cut Pro was also used in this movie to enable face replacement in a number of scenes. Two of the key characters in the movie are twins, and so the scenes were filmed with actors (who weren’t twins) and then the editing software was used to create the illusion that they were twins. Digital matte paintings was another feature of this movie that relied on the functionality of Final Cut Pro.
2. The Girl with the Dragon Tattoo (2011)
This was the US adaptation of the earlier Swedish film of the same name - based on the novel by Stieg Larsson. Starring Daniel Craig and Rooney Mara, the story is a crime thriller trying to uncover the secrets surrounding the disappearance of a young girl from a wealthy family.
One of the challenges with this movie was that there were a lot of invisible effects throughout the film. Final Cut Pro was used to achieve the shot stabilization and the visual enhancements - everything from matte painting to creating seasonal elements such as snow.
3. John Carter (2011)
A science fiction adventure, this film performed so badly at the box office that it caused major financial problems for its studio Disney.
The editing of the John Carter movie was a particular challenge as a lot of the action was shot twice during the troubled production. The editor Eric Zumbrunnen used Final Cut Pro to piece the various elements together. With a huge range of CGI and creature effects to deal with, the editing process on this movie was extremely complex. Final Cut Pro was used to create a lot of the background detail need to bring the green screen scenes to life.
4. 500 Days of Summer (2009)
This was a cute, quirky romantic comedy starring Joseph Gordon-Levitt and Zooey Deschanel.
Editing on the movie was by Alan Edward Bell in DVCPro HD format on Final Cut Pro. Because the storyline of the movie unfolds in a non-linear timeline, the workflow feature of Final Cut Pro made it easier to manage the sequencing of the different scenes. There were also 250 invisible effects which were created using Final Cut Pro’s editing features.
5. X-Men Origins: Wolverine (2009)
Continuing the X-Men franchise, this installment traces Wolverine’s childhood and the relationship with his brother. It didn’t really appeal to X-Men fans or movie critics.
Editing on the movie was by Nicolas De Toth and Megan Gill. There were a number of continuity glitches identified during the production of this movie but De Toth and Gill used Final Pro Cut to keep a consistent flow to the narrative. What is interesting about the editing on this movie is that all the cutting of the scenes required was done on Final Cut Pro 5, taking advantage of the software’s HD abilities and also the multi-clip features.
6. Burn After Reading (2008)
A black comedy from the talented brothers Joel and Ethan Coen, they wrote, produced, edited, and directed the movie.
The Coen brothers used Final Cut Pro on this movie because it was simple and easy to use - they were blocking together the rough cuts as the scenes were being shot, and Final Cut Pro gave them the flexibility that they needed to edit quickly. On this movie most of the action was shot using Sony cameras but there were several scenes on which a RED camera was added when an additional camera was needed. Even though there is a significantly different workflow between the two types of camera, the RED material was able to be integrated smoothly with the Sony footage.
7. No Country for Old Men (2007)
A neo-Western thriller from Coen brothers. They directed, wrote, and edited this production.
The movie was also nominated for an Academy Award for Best Editing for editor Roderick Jaynes (a pseudonym for Joel and Ethan Coen).
Directing and editing a movie brings the two processes a lot closer together for the Coen brothers. An easy to use product such as Final Cut Pro ensures that they can construct the movie’s narrative using the timeline features of the product. This movie marked a chance in approach for the Coen brothers, who took advantage of the better resolution DVCPRO HD for their cutting process compared to earlier films that were cut at DV resolution.
8. 300 (2007)
Based on a graphic novel by Frank Miller, this is the fictionalized retelling of the Battle Termopylae - part of the Persian Wars. Directed by Zack Snyder, the movie was filmed with a super-imposition chroma key technique to help replicate the imagery of the original comic book. Editing on the movie was by William Hoy.
To capture the graphic novel look and feel of the film’s images, editor Hoy used a number of the key Final Cut Pro features such as the adjustment layer and blending modes to create depth and mood. With the look and feel of this movie so dependent on the effects created, editor Hoy spent a lot of time debating what was being added visually to each shot and how this would impact the length and continuity of each scene.
9. Sky Captain and the World of Tomorrow (2004)
With big name stars (Gwyneth Paltrow and Jude Law), this was an unusual film that used digital artists to build multi-layered 2D and 3D backgrounds for live action footage, with hand-drawn storyboards recreated as computer-generated 3D animatics. Critically it was well received but didn’t set the box office alight.
Editing on the movie was by Sabrina Plisco.
Final Cut Pro was particularly critical to create a scene between two characters that was shot in a physical set (unlike the digital soundstage that was used for the rest of the movie). Final Cut Pro allowed the filmmakers to line up the animatics with the live onstage footage. One of the challenges with this movie is that the editors had to manually assign time-codes to each take - the clips were then rendered out and sorted so that they could be used on a Final Cut Pro SD workstation. This approach was also used to create the master off-line cut. Batch lists of the cuts were then imported into Final Cut Pro.
10. Cold Mountain (2003)
This is an epic Civil War drama based on the novel by Charles Frazier. Starring Jude Law, Nicole Kidman, and Renee Zellweger this was critically acclaimed and performed reasonably well at the box office.
The movie was also nominated for an Academy Award for Best Editing let by editor Walter Murch.
This was really seen as the breakthrough movie for the use of Final Cut Pro in Hollywood Movies. An entire book has been produced analysing how editor Murch used Final Cut Pro to edit the movie and analysis its impact on future cinema productions. Editor Murch believes that the use of Final Cut Pro on this movie indirected affected the ultimate creative outcome. In particular, the use of the DVD authoring capabilities on Final Cut Pro meant that the editing team was able to look at the material more often, sharing it with more people, and changing the way that they looked at certain scenes.
While Hollywood movies require editing tools of the highest order, the range of effects that you can achieve using Final Cut Pro is impressive - as well as the standard ripple, roll, slip, slide, scrub, razor blade and time remapping edit functions, Final Cut Pro also comes with a range of video transitions and a range of video and audio filters that will take your film project to the next level.
It is clear that Final Cut Pro is definitely now a star in the editing of Hollywood movies, it is time to make it a star in editing your movies as well.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Also read:
- Updated Lumafusion for macOS Download and Explore Top Alternatives for 2024
- In 2024, Unlock Free Video Blurring Tools Your Go-To Resource
- Top Video Lighting Enhancement Tools for 2024
- Updated The Secret to Saving YouTube Audio A Comprehensive Guide
- Updated In 2024, Capture Lifes Moments Best Time-Lapse Apps for iOS and Android
- Updated Image Size Made Simple A Beginners Guide to Ratio Calculators for 2024
- Updated In 2024, Make Your Text Pop 8 Top-Rated Neon Generators Online
- New In 2024, Video Rotation Made Easy Top 10 Online Tools
- New In 2024, The Best Speech to Text Apps on Mac You Might Miss Free & No Download
- 2024 Approved No Budget, No Problem Best Free MOD Video Editors
- New In 2024, Generate Stunning Audio Waveform Videos with These Tools
- Updated In 2024, Transforming Text Into Audio Expert Guidance for MP3 Creation
- Updated In 2024, Video Editing Without Boundaries 35 Top Tools for Any Platform
- New 7 Best Filmmaking Software You Should Know (Low Budget) for 2024
- New In 2024, Transform Your Videos Best Mobile Editing Apps for iPhone and Android
- New 2024 Approved Get Creative with Slow Motion Tips and Tricks for Windows Live Movie Maker Users
- Updated Video Blurring Made Easy No Cost, No Hassle
- Updated In 2024, GoPro Video Editing for Everyone A Simple, Free, and Fun Approach
- Updated 2024 Approved Swap Faces Like a Pro The Best Apps for iOS and Android
- New In 2024, Replace iMovie with These Excellent Windows Video Editors
- Say Goodbye to Crooked Videos 10 Best Online Rotation Tools for 2024
- New Elevate Your Soundtrack 2 Audio Fade Techniques in Final Cut Pro for 2024
- New 2024 Approved Mac VLC Video Cutter Trim, Cut, and Edit Videos Without Quality Degradation
- Preparation to Beat Giovani in Pokemon Go For OnePlus Nord N30 5G | Dr.fone
- In 2024, 3 Effective Ways to Bypass Activation Lock on iPhone 6s
- 3 Easy Methods to Unlock iCloud Locked Apple iPhone 7/iPad/iPod
- Updated In 2024, Popular Female & Male Disney Cartoon Characters To Empower You
- Hassle-Free Ways to Remove FRP Lock on Vivo Y27 5Gwith/without a PC
- In 2024, Top 5 Car Locator Apps for Vivo Y78t | Dr.fone
- 2024 Approved Have You Ever Wanted to Speed up or Slow Down a Video? Maybe It Was Too Long, or You Wanted to Draw Out an Exciting Part of the Video without Having to Watch the Boring Parts
- How to Detect and Stop mSpy from Spying on Your Apple iPhone 7 | Dr.fone
- How to Fix Vivo Y27 5G Find My Friends No Location Found? | Dr.fone
- How to Find iSpoofer Pro Activation Key On Samsung Galaxy Z Fold 5? | Dr.fone
- Title: New In 2024, Free Video Looping Software Top 10 Picks
- Author: MdadeLe
- Created at : 2024-05-19 08:28:50
- Updated at : 2024-05-20 08:28:50
- Link: https://smart-video-editing.techidaily.com/new-in-2024-free-video-looping-software-top-10-picks/
- License: This work is licensed under CC BY-NC-SA 4.0.
