Major Update Alert: Filmora X Now Compatible with ARM Processors

Official Announcement: Filmora X now supports ARM

Shanoon Cox

Aug 18, 2022• Proven solutions

It’s official! Apple will now start making in-house processors for Macs based on ARM 64-bit architecture, proving to be faster and much more efficient than its previous models. With all that, there might be a problem. Any software that does not support the new Apple M1 chip may not be compatible with Apple devices. But Wondershare has taken care of that small inconvenience.

The good news is that all versions of Wondershare Filmora X that are above 10.1 will support ARM. We at Wondershare have conducted these internal tests on all Apple Mac devices such as the Macbook Air, Macbook Mini, and Macbook Pro.

The testers at Wondershare have found out that our state-of-the-art software is all set to be utilized on the new and improved M1 chip that will be used in the new Macbooks.

We have released our newest version of Filmora which is the 10.1 and that is just the beginning! We plan to upgrade our software and come out with innovations that will surely match every update that Apple comes up with using the latest ARM 64-bit architecture.

As Apple introduces technological innovations, Filmora will match that with its product and service upgrades to ensure a better video editing experience for its users.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Aug 18, 2022• Proven solutions

The testers at Wondershare have found out that our state-of-the-art software is all set to be utilized on the new and improved M1 chip that will be used in the new Macbooks.

As Apple introduces technological innovations, Filmora will match that with its product and service upgrades to ensure a better video editing experience for its users.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Aug 18, 2022• Proven solutions

The testers at Wondershare have found out that our state-of-the-art software is all set to be utilized on the new and improved M1 chip that will be used in the new Macbooks.

As Apple introduces technological innovations, Filmora will match that with its product and service upgrades to ensure a better video editing experience for its users.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Aug 18, 2022• Proven solutions

The testers at Wondershare have found out that our state-of-the-art software is all set to be utilized on the new and improved M1 chip that will be used in the new Macbooks.

As Apple introduces technological innovations, Filmora will match that with its product and service upgrades to ensure a better video editing experience for its users.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

The Ultimate Guide to Creating Engaging LinkedIn Video Thumbnails

How to Custom LinkedIn Video Thumbnail Size

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

If you have been looking for options to grab the potential of video posting on LinkedIn you are reading on the right page.

We will guide you through the importance of Linkedin thumbnail, and effective ways to create a thumbnail. Keep reading!!!

Part 1 What is a LinkedIn video thumbnail and its size specifications?

A thumbnail for a video is like a preview image of the video and acts like its cover. The viewer will get an idea about what the video contains through its thumbnail image. Though the site chooses the first frame of the video as the thumbnail, you can even set a customized one that is attractive and interesting.

The LinkedIn video thumbnail size specifications are as follows:

● Image size: 1200 X 627 pixels

● Format of the image: JPG or PNG

● Maximum size of the image: 2MB

● Aspect Ratio: The aspect ratio of the thumbnail should match that of the video itself.

Part 2 Publishing videos on LinkedIn

If you are planning to publish a video on LinkedIn, the first thing to know is the place where it will be published. LinkedIn allows adding the videos on the personal feed as well as on the Company pages.

If you are into an established business or a brand having a large number of followers, paid video posts on the company page work best.

For the small- setups and businesses who are looking to promote their products and brands posting a video on the personal feed is a good idea. Initially, you can start by posting on your feed and then can later create a company page.

Part 3 Ways To Publish Videos On Linkedin

After you have decided that whether you will be posting a video on your company page or your personal feed, the next thing is to decide that how the video will be published. There are 3 different ways for posting a video as enlisted below.

● Using YouTube and Vimeo links

If you have your videos on Vimeo or YouTube you can paste their link on your LinkedIn account. To watch the video, a person needs to click on the link and it will then open in the hosting platform.

● Using LinkedIn Native Video

This is the most effective method where a video can be uploaded directly on your LinkedIn account from your system as well as your phone. While posting videos directly on LinkedIn, you can even add customized thumbnails, stickers, subtitles, and titles. A native video will play automatically as it is seen by the people in their feed and thus, they reach a larger number of people.

● Using LinkedIn video ads

To reach the target audience, a sponsored post is also an effective way and the video ads can be posted only through a company page. Depending on the type of product or the brand to be promoted, the video can be created.

Part 4 Importance Of Thumbnails In Linkedin Video

The LinkedIn video thumbnail is one of the important factors that make your video engaging and interesting. Before a person starts watching your video, you need to ensure that they get interested in it and click it. For grabbing this first-time attention, a custom thumbnail works great. You can use any interesting graphic or an image related to your video and edit it to create a customized thumbnail.

A thumbnail can only be used when videos are posted as native LinkedIn videos.

Part 5 Tips To Create An Interesting And Effective Linkedin Video Thumbnail

The following tips will help you create interesting thumbnails for your LinkedIn videos that will grab the viewers’ attention.

● Search for thumbnail templates

There are several sites like Canva, Visme, Postermywall, and others where you can get ready-made templates for creating impressive thumbnails. A variety of designs in different categories are available at these sites to choose from.

● Edit files using an editing tool

To edit the selected template or a fresh image to be used as a thumbnail, you would need a good editing tool. We recommend Wondershare Filmora Video Editor here as excellent software that can edit your files in multiple ways. The software can be downloaded on your Windows and Mac systems in a hassle-free manner and then multiple editing tools can be used to get the desired thumbnail image. Some of the key features supported by the software include enhancing files with effects, rotating, merging, cropping, flipping, adding text & tiles, adding overlays and filters, transitions and elements, motion tracking, color tuning, and much more.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

The interface of the software is simple and the process is fast which makes the software perfect for all types of users.

● Keep it simple and uncluttered

The thumbnail should be kept simple and without any clutter. Since LinkedIn is a professional platform there is no need for any unnecessary details needed.

● Let the thumbnail speak of your content

Create a thumbnail that speaks about the content of your video. If the thumbnail is interesting and gives an idea about your video, the viewer will open and watch it.

Key Takeaways from This Episode

● The LinkedIn video thumbnail is a cover image for your videos posted on LinkedIn.

● The videos on LinkedIn can be posted on the company page or as a personal feed.

● The videos can be posted as YouTube or Vimeo links, LinkedIn ads, or as native LinkedIn videos.

● There are several factors to create an effective LinkedIn video thumbnail and one of them is using professional editing software like Wondershare Filmora.

Try It Free Try It Free

If you have been looking for options to grab the potential of video posting on LinkedIn you are reading on the right page.

We will guide you through the importance of Linkedin thumbnail, and effective ways to create a thumbnail. Keep reading!!!

Part 1 What is a LinkedIn video thumbnail and its size specifications?

The LinkedIn video thumbnail size specifications are as follows:

● Image size: 1200 X 627 pixels

● Format of the image: JPG or PNG

● Maximum size of the image: 2MB

● Aspect Ratio: The aspect ratio of the thumbnail should match that of the video itself.

Part 2 Publishing videos on LinkedIn

If you are into an established business or a brand having a large number of followers, paid video posts on the company page work best.

Part 3 Ways To Publish Videos On Linkedin

● Using YouTube and Vimeo links

If you have your videos on Vimeo or YouTube you can paste their link on your LinkedIn account. To watch the video, a person needs to click on the link and it will then open in the hosting platform.

● Using LinkedIn Native Video

● Using LinkedIn video ads

Part 4 Importance Of Thumbnails In Linkedin Video

A thumbnail can only be used when videos are posted as native LinkedIn videos.

Part 5 Tips To Create An Interesting And Effective Linkedin Video Thumbnail

The following tips will help you create interesting thumbnails for your LinkedIn videos that will grab the viewers’ attention.

● Search for thumbnail templates

● Edit files using an editing tool

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

The interface of the software is simple and the process is fast which makes the software perfect for all types of users.

● Keep it simple and uncluttered

The thumbnail should be kept simple and without any clutter. Since LinkedIn is a professional platform there is no need for any unnecessary details needed.

● Let the thumbnail speak of your content

Create a thumbnail that speaks about the content of your video. If the thumbnail is interesting and gives an idea about your video, the viewer will open and watch it.

Key Takeaways from This Episode

● The LinkedIn video thumbnail is a cover image for your videos posted on LinkedIn.

● The videos on LinkedIn can be posted on the company page or as a personal feed.

● The videos can be posted as YouTube or Vimeo links, LinkedIn ads, or as native LinkedIn videos.

● There are several factors to create an effective LinkedIn video thumbnail and one of them is using professional editing software like Wondershare Filmora.

Try It Free Try It Free

If you have been looking for options to grab the potential of video posting on LinkedIn you are reading on the right page.

We will guide you through the importance of Linkedin thumbnail, and effective ways to create a thumbnail. Keep reading!!!

Part 1 What is a LinkedIn video thumbnail and its size specifications?

The LinkedIn video thumbnail size specifications are as follows:

● Image size: 1200 X 627 pixels

● Format of the image: JPG or PNG

● Maximum size of the image: 2MB

● Aspect Ratio: The aspect ratio of the thumbnail should match that of the video itself.

Part 2 Publishing videos on LinkedIn

If you are into an established business or a brand having a large number of followers, paid video posts on the company page work best.

Part 3 Ways To Publish Videos On Linkedin

● Using YouTube and Vimeo links

If you have your videos on Vimeo or YouTube you can paste their link on your LinkedIn account. To watch the video, a person needs to click on the link and it will then open in the hosting platform.

● Using LinkedIn Native Video

● Using LinkedIn video ads

Part 4 Importance Of Thumbnails In Linkedin Video

A thumbnail can only be used when videos are posted as native LinkedIn videos.

Part 5 Tips To Create An Interesting And Effective Linkedin Video Thumbnail

The following tips will help you create interesting thumbnails for your LinkedIn videos that will grab the viewers’ attention.

● Search for thumbnail templates

● Edit files using an editing tool

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

The interface of the software is simple and the process is fast which makes the software perfect for all types of users.

● Keep it simple and uncluttered

The thumbnail should be kept simple and without any clutter. Since LinkedIn is a professional platform there is no need for any unnecessary details needed.

● Let the thumbnail speak of your content

Create a thumbnail that speaks about the content of your video. If the thumbnail is interesting and gives an idea about your video, the viewer will open and watch it.

Key Takeaways from This Episode

● The LinkedIn video thumbnail is a cover image for your videos posted on LinkedIn.

● The videos on LinkedIn can be posted on the company page or as a personal feed.

● The videos can be posted as YouTube or Vimeo links, LinkedIn ads, or as native LinkedIn videos.

● There are several factors to create an effective LinkedIn video thumbnail and one of them is using professional editing software like Wondershare Filmora.

Try It Free Try It Free

If you have been looking for options to grab the potential of video posting on LinkedIn you are reading on the right page.

We will guide you through the importance of Linkedin thumbnail, and effective ways to create a thumbnail. Keep reading!!!

Part 1 What is a LinkedIn video thumbnail and its size specifications?

The LinkedIn video thumbnail size specifications are as follows:

● Image size: 1200 X 627 pixels

● Format of the image: JPG or PNG

● Maximum size of the image: 2MB

● Aspect Ratio: The aspect ratio of the thumbnail should match that of the video itself.

Part 2 Publishing videos on LinkedIn

If you are into an established business or a brand having a large number of followers, paid video posts on the company page work best.

Part 3 Ways To Publish Videos On Linkedin

● Using YouTube and Vimeo links

If you have your videos on Vimeo or YouTube you can paste their link on your LinkedIn account. To watch the video, a person needs to click on the link and it will then open in the hosting platform.

● Using LinkedIn Native Video

● Using LinkedIn video ads

Part 4 Importance Of Thumbnails In Linkedin Video

A thumbnail can only be used when videos are posted as native LinkedIn videos.

Part 5 Tips To Create An Interesting And Effective Linkedin Video Thumbnail

The following tips will help you create interesting thumbnails for your LinkedIn videos that will grab the viewers’ attention.

● Search for thumbnail templates

● Edit files using an editing tool

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

The interface of the software is simple and the process is fast which makes the software perfect for all types of users.

● Keep it simple and uncluttered

The thumbnail should be kept simple and without any clutter. Since LinkedIn is a professional platform there is no need for any unnecessary details needed.

● Let the thumbnail speak of your content

Create a thumbnail that speaks about the content of your video. If the thumbnail is interesting and gives an idea about your video, the viewer will open and watch it.

Key Takeaways from This Episode

● The LinkedIn video thumbnail is a cover image for your videos posted on LinkedIn.

● The videos on LinkedIn can be posted on the company page or as a personal feed.

● The videos can be posted as YouTube or Vimeo links, LinkedIn ads, or as native LinkedIn videos.

● There are several factors to create an effective LinkedIn video thumbnail and one of them is using professional editing software like Wondershare Filmora.

Time Warp: Unlocking Freeze Frames and Slow Motion in FCPX

Final Cut Pro X: Freeze-Frames and Slow Motion

Benjamin Arango

Mar 27, 2024• Proven solutions

A very simple, yet very effective effect is changing the speed of a video clip. This could be a simple still-frame (also called “Freeze Frame”) or playing a clip in slow or fast motion.

This article shows you how to do this using Final Cut Pro X.

For more tutorials on slow-motion please refer to this article: Top 10 Slow Motion Video Editing Software.

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

A still-frame freezes action. For instance, here is a clip of a hummingbird getting ready to land on a bird feeder. I want to create a freeze-frame of the bird in flight. (Um, yeah, I use “freeze-frame” and “still-frame” interchangeably.)

In Final Cut Pro X, put the playhead (or skimmer) on the frame you want to freeze and type Option+F.

This creates a two-second freeze-frame at the position of the playhead.

Adjust the duration of the frame by trimming the edge; just like any other clip. Here, for example, I’m making the duration of the freeze-frame 11 frames shorter.

In case you were wondering, this is what the freeze looks like. It freezes the flight of the hummingbird in the middle of playback, allowing us to add graphics or other text then resume the action as though nothing had happened.

Very cool, except….

Well, the good news is that this is fast and easy. The bad news is that we can’t change the location of the still frame.

So, here’s another way to do this.

Put the playhead (or skimmer, but I prefer the playhead) on the frame you want to freeze, select the clip, then type Shift+F.

This locates the source clip in the Browser, selects both the Browser and the clip, and matches the position of the In, Out, and playhead.

Now, with the Browser selected, type Option+F. This creates a freeze-frame of the Browser clip and places it at the location of the playhead as a connected clip in the Timeline.

As a connected clip, we can move this new freeze-frame wherever we want. However, be careful in moving the clip, because, unless you mark the original frame with a marker (type “M”), there’s no easy way to match the still frame with the source frame, once the still frame is moved somewhere else.

I use both these techniques in many different projects.

2. HOLD FRAME

A Hold Frame is similar to an in-line still frame, but with more flexibility.

Put the playhead (or skimmer) on the frame you want to hold. Then, Then, using either Modify > Retime or the “Smurf-on-a-headset” Toolbar icon, choose Hold Frame (or type: Shift+H).

This displays the orange Retime editor bar above the clip, with a small red portion indicating the Hold frame.

Change the duration of the Hold frame by dragging the small thumb at the right end of the red bar.

Add a speed ramp transition at the end of the Hold frame by clicking the downward-pointing arrow next to the word “Hold” in the Retime Editor.

To change the actual frame being held, double-click the bar icon to the LEFT of the red Hold section and choose Source Frame (Edit). This allows you to slide the Hold frame selection left or right.

NOTE: Changing the source frame is a feature that I like a LOT!

3. SLOW (or FAST) MOTION

fast/slow motion

We use slow-motion to show events that are too fast for the unaided eye to see. And fast motion to speed up very slow events. Both of these effects use what’s called a “constant speed change,” where the entire clip changes by the same amount - either faster or slower.

WE create either effect using the same tools, just different values. Here’s how.

Select the clip who’s speed you want to change. Then, using either Modify > Retime or the “Smurf” Toolbar icon, select Slow (or Fast).

Choose one of the available speeds; in this case, 50%. (Yes, you can change this to any value you want, I’ll show you how in a minute.)

create slow/fast motion

Three things happen at once:

The duration of the clip changes
The orange Retiming bar appears over the top of the clip
The speed of the clip changes

To reset the speed back to normal (100%), click the downward-pointing arrow in the Retiming bar and choose Normal (100%).

There are two ways to change the speed of a clip.

The easy way is to grab the small handle at the end of the clip and drag left or right. The speed will change as you drag it.

Or, for more precision, click the downward-pointing arrow in the Retiming bar and choose Custom.

This opens a new dialog allowing a number of changes:

Reverse. Plays the clip in reverse.
Rate. Select a specific speed change as a percentage of normal speed for a clip. Less than 100% is slow-motion. More than 100% is fast-motion.
Duration. Select a specific duration for a clip and FCP X will calculate how fast or slow it needs to go.
Ripple. When checked, adjusts the duration of a clip based upon the speed. When unchecked, the clip duration remains fixed even when speed changes.

You will get the smoothest speed changes when the percentage you choose divides evenly into 200. For example, 100, 66, 50, 40, 33, 25, 20, 10 and so on.

4. EXTRA CREDIT

There is one more setting to consider when slowing a clip. (This does not apply when creating fast motion.)

Using, again, either Modify > Retime or the “Smurf” menu, select Video Quality.

Normal. This is the best choice for speeds of 50% or faster.
Frame Blending. This is the best choice for speeds of about 20% to 50%.
Optical Flow. This is the best choice for speeds slower than about 20%.

Frame blending puts a short dissolve between frames when running in slow motion to improve the illusion of motion. Optical Flow invents in-between frames to minimize the jerkiness of extremely slow motion.

Frame blending is relatively fast and easy. Optical Flow will look better in most cases, but takes a long time to render.

This is a basic tutorial about Apple Final Cut Pro X, a professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

SUMMARY

Whether you want your clips to speed up, slow down or just plain stop, Final Cut Pro X makes the entire process easy.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

A very simple, yet very effective effect is changing the speed of a video clip. This could be a simple still-frame (also called “Freeze Frame”) or playing a clip in slow or fast motion.

This article shows you how to do this using Final Cut Pro X.

For more tutorials on slow-motion please refer to this article: Top 10 Slow Motion Video Editing Software.

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

In Final Cut Pro X, put the playhead (or skimmer) on the frame you want to freeze and type Option+F.

This creates a two-second freeze-frame at the position of the playhead.

Adjust the duration of the frame by trimming the edge; just like any other clip. Here, for example, I’m making the duration of the freeze-frame 11 frames shorter.

Very cool, except….

Well, the good news is that this is fast and easy. The bad news is that we can’t change the location of the still frame.

So, here’s another way to do this.

Put the playhead (or skimmer, but I prefer the playhead) on the frame you want to freeze, select the clip, then type Shift+F.

This locates the source clip in the Browser, selects both the Browser and the clip, and matches the position of the In, Out, and playhead.

Now, with the Browser selected, type Option+F. This creates a freeze-frame of the Browser clip and places it at the location of the playhead as a connected clip in the Timeline.

I use both these techniques in many different projects.

2. HOLD FRAME

A Hold Frame is similar to an in-line still frame, but with more flexibility.

Put the playhead (or skimmer) on the frame you want to hold. Then, Then, using either Modify > Retime or the “Smurf-on-a-headset” Toolbar icon, choose Hold Frame (or type: Shift+H).

This displays the orange Retime editor bar above the clip, with a small red portion indicating the Hold frame.

Change the duration of the Hold frame by dragging the small thumb at the right end of the red bar.

Add a speed ramp transition at the end of the Hold frame by clicking the downward-pointing arrow next to the word “Hold” in the Retime Editor.

To change the actual frame being held, double-click the bar icon to the LEFT of the red Hold section and choose Source Frame (Edit). This allows you to slide the Hold frame selection left or right.

NOTE: Changing the source frame is a feature that I like a LOT!

3. SLOW (or FAST) MOTION

fast/slow motion

WE create either effect using the same tools, just different values. Here’s how.

Select the clip who’s speed you want to change. Then, using either Modify > Retime or the “Smurf” Toolbar icon, select Slow (or Fast).

Choose one of the available speeds; in this case, 50%. (Yes, you can change this to any value you want, I’ll show you how in a minute.)

create slow/fast motion

Three things happen at once:

The duration of the clip changes
The orange Retiming bar appears over the top of the clip
The speed of the clip changes

To reset the speed back to normal (100%), click the downward-pointing arrow in the Retiming bar and choose Normal (100%).

There are two ways to change the speed of a clip.

The easy way is to grab the small handle at the end of the clip and drag left or right. The speed will change as you drag it.

Or, for more precision, click the downward-pointing arrow in the Retiming bar and choose Custom.

This opens a new dialog allowing a number of changes:

Reverse. Plays the clip in reverse.
Rate. Select a specific speed change as a percentage of normal speed for a clip. Less than 100% is slow-motion. More than 100% is fast-motion.
Duration. Select a specific duration for a clip and FCP X will calculate how fast or slow it needs to go.
Ripple. When checked, adjusts the duration of a clip based upon the speed. When unchecked, the clip duration remains fixed even when speed changes.

You will get the smoothest speed changes when the percentage you choose divides evenly into 200. For example, 100, 66, 50, 40, 33, 25, 20, 10 and so on.

4. EXTRA CREDIT

There is one more setting to consider when slowing a clip. (This does not apply when creating fast motion.)

Using, again, either Modify > Retime or the “Smurf” menu, select Video Quality.

Normal. This is the best choice for speeds of 50% or faster.
Frame Blending. This is the best choice for speeds of about 20% to 50%.
Optical Flow. This is the best choice for speeds slower than about 20%.

Frame blending is relatively fast and easy. Optical Flow will look better in most cases, but takes a long time to render.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

SUMMARY

Whether you want your clips to speed up, slow down or just plain stop, Final Cut Pro X makes the entire process easy.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

A very simple, yet very effective effect is changing the speed of a video clip. This could be a simple still-frame (also called “Freeze Frame”) or playing a clip in slow or fast motion.

This article shows you how to do this using Final Cut Pro X.

For more tutorials on slow-motion please refer to this article: Top 10 Slow Motion Video Editing Software.

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

In Final Cut Pro X, put the playhead (or skimmer) on the frame you want to freeze and type Option+F.

This creates a two-second freeze-frame at the position of the playhead.

Adjust the duration of the frame by trimming the edge; just like any other clip. Here, for example, I’m making the duration of the freeze-frame 11 frames shorter.

Very cool, except….

Well, the good news is that this is fast and easy. The bad news is that we can’t change the location of the still frame.

So, here’s another way to do this.

Put the playhead (or skimmer, but I prefer the playhead) on the frame you want to freeze, select the clip, then type Shift+F.

This locates the source clip in the Browser, selects both the Browser and the clip, and matches the position of the In, Out, and playhead.

Now, with the Browser selected, type Option+F. This creates a freeze-frame of the Browser clip and places it at the location of the playhead as a connected clip in the Timeline.

I use both these techniques in many different projects.

2. HOLD FRAME

A Hold Frame is similar to an in-line still frame, but with more flexibility.

Put the playhead (or skimmer) on the frame you want to hold. Then, Then, using either Modify > Retime or the “Smurf-on-a-headset” Toolbar icon, choose Hold Frame (or type: Shift+H).

This displays the orange Retime editor bar above the clip, with a small red portion indicating the Hold frame.

Change the duration of the Hold frame by dragging the small thumb at the right end of the red bar.

Add a speed ramp transition at the end of the Hold frame by clicking the downward-pointing arrow next to the word “Hold” in the Retime Editor.

To change the actual frame being held, double-click the bar icon to the LEFT of the red Hold section and choose Source Frame (Edit). This allows you to slide the Hold frame selection left or right.

NOTE: Changing the source frame is a feature that I like a LOT!

3. SLOW (or FAST) MOTION

fast/slow motion

WE create either effect using the same tools, just different values. Here’s how.

Select the clip who’s speed you want to change. Then, using either Modify > Retime or the “Smurf” Toolbar icon, select Slow (or Fast).

Choose one of the available speeds; in this case, 50%. (Yes, you can change this to any value you want, I’ll show you how in a minute.)

create slow/fast motion

Three things happen at once:

The duration of the clip changes
The orange Retiming bar appears over the top of the clip
The speed of the clip changes

To reset the speed back to normal (100%), click the downward-pointing arrow in the Retiming bar and choose Normal (100%).

There are two ways to change the speed of a clip.

The easy way is to grab the small handle at the end of the clip and drag left or right. The speed will change as you drag it.

Or, for more precision, click the downward-pointing arrow in the Retiming bar and choose Custom.

This opens a new dialog allowing a number of changes:

Reverse. Plays the clip in reverse.
Rate. Select a specific speed change as a percentage of normal speed for a clip. Less than 100% is slow-motion. More than 100% is fast-motion.
Duration. Select a specific duration for a clip and FCP X will calculate how fast or slow it needs to go.
Ripple. When checked, adjusts the duration of a clip based upon the speed. When unchecked, the clip duration remains fixed even when speed changes.

You will get the smoothest speed changes when the percentage you choose divides evenly into 200. For example, 100, 66, 50, 40, 33, 25, 20, 10 and so on.

4. EXTRA CREDIT

There is one more setting to consider when slowing a clip. (This does not apply when creating fast motion.)

Using, again, either Modify > Retime or the “Smurf” menu, select Video Quality.

Normal. This is the best choice for speeds of 50% or faster.
Frame Blending. This is the best choice for speeds of about 20% to 50%.
Optical Flow. This is the best choice for speeds slower than about 20%.

Frame blending is relatively fast and easy. Optical Flow will look better in most cases, but takes a long time to render.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

SUMMARY

Whether you want your clips to speed up, slow down or just plain stop, Final Cut Pro X makes the entire process easy.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

A very simple, yet very effective effect is changing the speed of a video clip. This could be a simple still-frame (also called “Freeze Frame”) or playing a clip in slow or fast motion.

This article shows you how to do this using Final Cut Pro X.

For more tutorials on slow-motion please refer to this article: Top 10 Slow Motion Video Editing Software.

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

In Final Cut Pro X, put the playhead (or skimmer) on the frame you want to freeze and type Option+F.

This creates a two-second freeze-frame at the position of the playhead.

Adjust the duration of the frame by trimming the edge; just like any other clip. Here, for example, I’m making the duration of the freeze-frame 11 frames shorter.

Very cool, except….

Well, the good news is that this is fast and easy. The bad news is that we can’t change the location of the still frame.

So, here’s another way to do this.

Put the playhead (or skimmer, but I prefer the playhead) on the frame you want to freeze, select the clip, then type Shift+F.

This locates the source clip in the Browser, selects both the Browser and the clip, and matches the position of the In, Out, and playhead.

Now, with the Browser selected, type Option+F. This creates a freeze-frame of the Browser clip and places it at the location of the playhead as a connected clip in the Timeline.

I use both these techniques in many different projects.

2. HOLD FRAME

A Hold Frame is similar to an in-line still frame, but with more flexibility.

Put the playhead (or skimmer) on the frame you want to hold. Then, Then, using either Modify > Retime or the “Smurf-on-a-headset” Toolbar icon, choose Hold Frame (or type: Shift+H).

This displays the orange Retime editor bar above the clip, with a small red portion indicating the Hold frame.

Change the duration of the Hold frame by dragging the small thumb at the right end of the red bar.

Add a speed ramp transition at the end of the Hold frame by clicking the downward-pointing arrow next to the word “Hold” in the Retime Editor.

To change the actual frame being held, double-click the bar icon to the LEFT of the red Hold section and choose Source Frame (Edit). This allows you to slide the Hold frame selection left or right.

NOTE: Changing the source frame is a feature that I like a LOT!

3. SLOW (or FAST) MOTION

fast/slow motion

WE create either effect using the same tools, just different values. Here’s how.

Select the clip who’s speed you want to change. Then, using either Modify > Retime or the “Smurf” Toolbar icon, select Slow (or Fast).

Choose one of the available speeds; in this case, 50%. (Yes, you can change this to any value you want, I’ll show you how in a minute.)

create slow/fast motion

Three things happen at once:

The duration of the clip changes
The orange Retiming bar appears over the top of the clip
The speed of the clip changes

To reset the speed back to normal (100%), click the downward-pointing arrow in the Retiming bar and choose Normal (100%).

There are two ways to change the speed of a clip.

The easy way is to grab the small handle at the end of the clip and drag left or right. The speed will change as you drag it.

Or, for more precision, click the downward-pointing arrow in the Retiming bar and choose Custom.

This opens a new dialog allowing a number of changes:

Reverse. Plays the clip in reverse.
Rate. Select a specific speed change as a percentage of normal speed for a clip. Less than 100% is slow-motion. More than 100% is fast-motion.
Duration. Select a specific duration for a clip and FCP X will calculate how fast or slow it needs to go.
Ripple. When checked, adjusts the duration of a clip based upon the speed. When unchecked, the clip duration remains fixed even when speed changes.

You will get the smoothest speed changes when the percentage you choose divides evenly into 200. For example, 100, 66, 50, 40, 33, 25, 20, 10 and so on.

4. EXTRA CREDIT

There is one more setting to consider when slowing a clip. (This does not apply when creating fast motion.)

Using, again, either Modify > Retime or the “Smurf” menu, select Video Quality.

Normal. This is the best choice for speeds of 50% or faster.
Frame Blending. This is the best choice for speeds of about 20% to 50%.
Optical Flow. This is the best choice for speeds slower than about 20%.

Frame blending is relatively fast and easy. Optical Flow will look better in most cases, but takes a long time to render.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

SUMMARY

Whether you want your clips to speed up, slow down or just plain stop, Final Cut Pro X makes the entire process easy.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Smart Video Editing

2024 Approved Major Update Alert Filmora X Now Compatible with ARM Processors

Major Update Alert: Filmora X Now Compatible with ARM Processors

Official Announcement: Filmora X now supports ARM

Shanoon Cox

Shanoon Cox

Shanoon Cox

Shanoon Cox

The Ultimate Guide to Creating Engaging LinkedIn Video Thumbnails

How to Custom LinkedIn Video Thumbnail Size

In this article

Part 1 What is a LinkedIn video thumbnail and its size specifications?

Part 2 Publishing videos on LinkedIn

Part 3 Ways To Publish Videos On Linkedin

Part 4 Importance Of Thumbnails In Linkedin Video

Part 5 Tips To Create An Interesting And Effective Linkedin Video Thumbnail

Wondershare Filmora

Key Takeaways from This Episode

In this article

Part 1 What is a LinkedIn video thumbnail and its size specifications?

Part 2 Publishing videos on LinkedIn

Part 3 Ways To Publish Videos On Linkedin

Part 4 Importance Of Thumbnails In Linkedin Video

Part 5 Tips To Create An Interesting And Effective Linkedin Video Thumbnail

Wondershare Filmora

Key Takeaways from This Episode

In this article

Part 1 What is a LinkedIn video thumbnail and its size specifications?

Part 2 Publishing videos on LinkedIn

Part 3 Ways To Publish Videos On Linkedin

Part 4 Importance Of Thumbnails In Linkedin Video

Part 5 Tips To Create An Interesting And Effective Linkedin Video Thumbnail

Wondershare Filmora

Key Takeaways from This Episode

In this article

Part 1 What is a LinkedIn video thumbnail and its size specifications?

Part 2 Publishing videos on LinkedIn

Part 3 Ways To Publish Videos On Linkedin

Part 4 Importance Of Thumbnails In Linkedin Video

Part 5 Tips To Create An Interesting And Effective Linkedin Video Thumbnail

Wondershare Filmora

Key Takeaways from This Episode

Time Warp: Unlocking Freeze Frames and Slow Motion in FCPX

Final Cut Pro X: Freeze-Frames and Slow Motion

Benjamin Arango

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

2. HOLD FRAME

3. SLOW (or FAST) MOTION

4. EXTRA CREDIT

SUMMARY

Benjamin Arango

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

2. HOLD FRAME

3. SLOW (or FAST) MOTION

4. EXTRA CREDIT

SUMMARY

Benjamin Arango

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

2. HOLD FRAME

3. SLOW (or FAST) MOTION

4. EXTRA CREDIT

SUMMARY

Benjamin Arango

Freeze-Frames and Slow Motion in Final Cut Pro X

1. STILL FRAMES

2. HOLD FRAME

3. SLOW (or FAST) MOTION

4. EXTRA CREDIT

SUMMARY